include/configs/omap3_logic.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * (C) Copyright 2011 Logic Product Development <www.logicpd.com>
   4  *      Peter Barada <peter.barada@logicpd.com>
   5  *
   6  * Configuration settings for the Logic OMAP35x/DM37x SOM LV/Torpedo
   7  * reference boards.
   8  */
   9
  10 #ifndef __CONFIG_H
  11 #define __CONFIG_H
  12
  13 /* High Level Configuration Options */
  14
  15 #include <configs/ti_omap3_common.h>
  16
  17 /* Board NAND Info. */
  18 #ifdef CONFIG_MTD_RAW_NAND
  19 #define CONFIG_SYS_MAX_NAND_DEVICE      1         /* Max number of */
  20                                                   /* NAND devices */
  21 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
  22 #define CONFIG_SYS_NAND_ECCPOS          {2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, \
  23                                          13, 14, 16, 17, 18, 19, 20, 21, 22, \
  24                                          23, 24, 25, 26, 27, 28, 30, 31, 32, \
  25                                          33, 34, 35, 36, 37, 38, 39, 40, 41, \
  26                                          42, 44, 45, 46, 47, 48, 49, 50, 51, \
  27                                          52, 53, 54, 55, 56}
  28
  29 #define CONFIG_SYS_NAND_ECCSIZE         512
  30 #define CONFIG_SYS_NAND_ECCBYTES        13
  31 #define CONFIG_NAND_OMAP_ECCSCHEME      OMAP_ECC_BCH8_CODE_HW_DETECTION_SW
  32 #define CONFIG_SYS_NAND_MAX_OOBFREE     2
  33 #define CONFIG_SYS_NAND_MAX_ECCPOS      56
  34 #endif
  35
  36 /* Environment information */
  37
  38 #define CONFIG_EXTRA_ENV_SETTINGS \
  39         DEFAULT_LINUX_BOOT_ENV \
  40         "mtdids=" CONFIG_MTDIDS_DEFAULT "\0"    \
  41         "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
  42         "mmcdev=0\0" \
  43         "finduuid=part uuid mmc ${mmcdev}:2 uuid\0" \
  44         "mmcrootfstype=ext4 rootwait\0" \
  45         "nandroot=ubi0:rootfs rw ubi.mtd=fs noinitrd\0" \
  46         "nandrootfstype=ubifs rootwait\0" \
  47         "autoboot=mmc dev ${mmcdev}; if mmc rescan; then " \
  48                         "if run loadbootscript; then " \
  49                                 "run bootscript; " \
  50                         "else " \
  51                                 "run defaultboot;" \
  52                         "fi; " \
  53                 "else run defaultboot; fi\0" \
  54         "defaultboot=run mmcramboot\0" \
  55         "consoledevice=ttyS0\0" \
  56         "setconsole=setenv console ${consoledevice},${baudrate}n8\0" \
  57         "dump_bootargs=echo 'Bootargs: '; echo $bootargs\0" \
  58         "rotation=0\0" \
  59         "vrfb_arg=if itest ${rotation} -ne 0; then " \
  60                 "setenv bootargs ${bootargs} omapfb.vrfb=y " \
  61                 "omapfb.rotate=${rotation}; " \
  62                 "fi\0" \
  63         "optargs=ignore_loglevel early_printk no_console_suspend\0" \
  64         "common_bootargs=run setconsole; setenv bootargs " \
  65                 "${bootargs} "\
  66                 "console=${console} " \
  67                 "${mtdparts} "\
  68                 "${optargs}; " \
  69                 "run vrfb_arg\0" \
  70         "loadbootscript=load mmc ${mmcdev} ${loadaddr} boot.scr\0" \
  71         "bootscript=echo 'Running bootscript from mmc ...'; " \
  72                 "source ${loadaddr}\0" \
  73         "loadimage=mmc rescan; " \
  74                 "load mmc ${mmcdev} ${loadaddr} ${bootfile}\0" \
  75         "ramdisksize=64000\0" \
  76         "ramdiskimage=rootfs.ext2.gz.uboot\0" \
  77         "loadramdisk=mmc rescan; " \
  78                 "load mmc ${mmcdev} ${rdaddr} ${ramdiskimage}\0" \
  79         "ramargs=setenv bootargs "\
  80                 "root=/dev/ram rw ramdisk_size=${ramdisksize}\0" \
  81         "mmcargs=setenv bootargs "\
  82                 "root=PARTUUID=${uuid} " \
  83                 "rootfstype=${mmcrootfstype} rw\0" \
  84         "nandargs=setenv bootargs "\
  85                 "root=${nandroot} " \
  86                 "rootfstype=${nandrootfstype}\0" \
  87         "nfsargs=setenv serverip ${tftpserver}; " \
  88                 "setenv bootargs root=/dev/nfs " \
  89                 "nfsroot=${nfsrootpath} " \
  90                 "ip=${ipaddr}:${tftpserver}:${gatewayip}:${netmask}::eth0:off\0" \
  91         "nfsrootpath=/opt/nfs-exports/omap\0" \
  92         "autoload=no\0" \
  93         "fdtimage=" CONFIG_DEFAULT_DEVICE_TREE ".dtb\0" \
  94         "loadfdt=mmc rescan; " \
  95                 "load mmc ${mmcdev} ${fdtaddr} ${fdtimage}\0" \
  96         "mmcbootcommon=echo Booting with DT from mmc${mmcdev} ...; " \
  97                 "run finduuid; "\
  98                 "run mmcargs; " \
  99                 "run common_bootargs; " \
 100                 "run dump_bootargs; " \
 101                 "run loadimage; " \
 102                 "run loadfdt;\0 " \
 103         "mmcbootz=setenv bootfile zImage; " \
 104                 "run mmcbootcommon; "\
 105                 "bootz ${loadaddr} - ${fdtaddr}\0" \
 106         "mmcboot=setenv bootfile uImage; "\
 107                 "run mmcbootcommon; "\
 108                 "bootm ${loadaddr} - ${fdtaddr}\0" \
 109         "mmcrambootcommon=echo 'Booting kernel from MMC w/ramdisk...'; " \
 110                 "run ramargs; " \
 111                 "run common_bootargs; " \
 112                 "run dump_bootargs; " \
 113                 "run loadimage; " \
 114                 "run loadfdt; " \
 115                 "run loadramdisk\0" \
 116         "mmcramboot=setenv bootfile uImage; " \
 117                 "run mmcrambootcommon; " \
 118                 "bootm ${loadaddr} ${rdaddr} ${fdtaddr}\0" \
 119         "mmcrambootz=setenv bootfile zImage; " \
 120                 "run mmcrambootcommon; " \
 121                 "bootz ${loadaddr} ${rdaddr} ${fdtaddr}\0" \
 122         "tftpboot=echo 'Booting kernel/ramdisk rootfs from tftp...'; " \
 123                 "run ramargs; " \
 124                 "run common_bootargs; " \
 125                 "run dump_bootargs; " \
 126                 "tftpboot ${loadaddr} ${zimage}; " \
 127                 "tftpboot ${rdaddr} ${ramdiskimage}; " \
 128                 "bootm ${loadaddr} ${rdaddr}\0" \
 129         "tftpbootz=echo 'Booting kernel NFS rootfs...'; " \
 130                 "dhcp;" \
 131                 "run nfsargs;" \
 132                 "run common_bootargs;" \
 133                 "run dump_bootargs;" \
 134                 "tftpboot $loadaddr zImage;" \
 135                 "bootz $loadaddr\0" \
 136         "nandbootcommon=echo 'Booting kernel from NAND...';" \
 137                 "run nandargs;" \
 138                 "run common_bootargs;" \
 139                 "run dump_bootargs;" \
 140                 "nand read ${loadaddr} kernel;" \
 141                 "nand read ${fdtaddr} spl-os;\0" \
 142         "nandbootz=run nandbootcommon; "\
 143                 "bootz ${loadaddr} - ${fdtaddr}\0"\
 144         "nandboot=run nandbootcommon; "\
 145                 "bootm ${loadaddr} - ${fdtaddr}\0"\
 146
 147 #define CONFIG_BOOTCOMMAND \
 148         "run autoboot"
 149
 150 /* Miscellaneous configurable options */
 151
 152 /* memtest works on */
 153
 154 /* FLASH and environment organization */
 155
 156 /* **** PISMO SUPPORT *** */
 157 #if defined(CONFIG_CMD_NAND)
 158 #define CONFIG_SYS_FLASH_BASE           0x10000000
 159 #endif
 160
 161 #define CONFIG_SYS_MAX_FLASH_SECT       256
 162 #define CONFIG_SYS_MAX_FLASH_BANKS      1
 163 #define CONFIG_SYS_FLASH_CFI_WIDTH      FLASH_CFI_16BIT
 164 #define CONFIG_SYS_FLASH_SIZE           0x4000000
 165
 166 /* Monitor at start of flash */
 167 #define CONFIG_SYS_MONITOR_BASE         CONFIG_SYS_FLASH_BASE
 168
 169 #define CONFIG_SYS_ENV_SECT_SIZE        (128 << 10)     /* 128 KiB */
 170
 171 /* Defines for SPL */
 172
 173 /* NAND: SPL falcon mode configs */
 174 #ifdef CONFIG_SPL_OS_BOOT
 175 #define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x280000
 176 #endif
 177
 178 #endif /* __CONFIG_H */