pci: Move CONFIG_PCI_PNP to Kconfig
[platform/kernel/u-boot.git] / include / configs / novena.h
1 /*
2  * Configuration settings for the Novena U-Boot.
3  *
4  * Copyright (C) 2014 Marek Vasut <marex@denx.de>
5  *
6  * SPDX-License-Identifier:     GPL-2.0+
7  */
8
9 #ifndef __CONFIG_H
10 #define __CONFIG_H
11
12 /* System configurations */
13 #define CONFIG_BOARD_EARLY_INIT_F
14 #define CONFIG_BOARD_LATE_INIT
15 #define CONFIG_MISC_INIT_R
16 #define CONFIG_KEYBOARD
17
18 #include <config_distro_defaults.h>
19 #include "mx6_common.h"
20
21 /* U-Boot Commands */
22 #define CONFIG_CMD_BMODE
23 #define CONFIG_CMD_EEPROM
24 #define CONFIG_FAT_WRITE
25 #define CONFIG_CMD_PCI
26 #define CONFIG_CMD_SATA
27
28 /* U-Boot general configurations */
29
30 /* U-Boot environment */
31 #define CONFIG_ENV_SIZE                 (16 * 1024)
32 /*
33  * Environment is on MMC, starting at offset 512KiB from start of the card.
34  * Please place first partition at offset 1MiB from the start of the card
35  * as recommended by GNU/fdisk. See below for details:
36  * http://homepage.ntlworld.com./jonathan.deboynepollard/FGA/disc-partition-alignment.html
37  */
38 #ifdef CONFIG_CMD_MMC
39 #define CONFIG_ENV_IS_IN_MMC
40 #define CONFIG_SYS_MMC_ENV_DEV          0
41 #define CONFIG_ENV_OFFSET               (512 * 1024)
42 #define CONFIG_ENV_SIZE_REDUND          CONFIG_ENV_SIZE
43 #define CONFIG_ENV_OFFSET_REDUND        \
44                 (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)
45 #else
46 #define CONFIG_ENV_IS_NOWHERE
47 #endif
48
49 /* Booting Linux */
50 #define CONFIG_BOOTFILE                 "fitImage"
51 #define CONFIG_BOOTARGS                 "console=ttymxc1,115200 "
52 #define CONFIG_BOOTCOMMAND              "run distro_bootcmd ; run net_nfs"
53 #define CONFIG_HOSTNAME                 novena
54
55 /* Physical Memory Map */
56 #define CONFIG_NR_DRAM_BANKS            1
57 #define PHYS_SDRAM                      MMDC0_ARB_BASE_ADDR
58
59 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM
60 #define CONFIG_SYS_INIT_RAM_ADDR        IRAM_BASE_ADDR
61 #define CONFIG_SYS_INIT_RAM_SIZE        IRAM_SIZE
62
63 #define CONFIG_SYS_INIT_SP_OFFSET \
64         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
65 #define CONFIG_SYS_INIT_SP_ADDR \
66         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
67
68 #define CONFIG_SYS_MEMTEST_START        0x10000000
69 #define CONFIG_SYS_MEMTEST_END          0x20000000
70
71 #define CONFIG_SYS_MALLOC_LEN           (64 * 1024 * 1024)
72
73 /* SPL */
74 #include "imx6_spl.h"                   /* common IMX6 SPL configuration */
75
76 /* Ethernet Configuration */
77 #ifdef CONFIG_CMD_NET
78 #define CONFIG_FEC_MXC
79 #define CONFIG_MII
80 #define IMX_FEC_BASE                    ENET_BASE_ADDR
81 #define CONFIG_FEC_XCV_TYPE             RGMII
82 #define CONFIG_ETHPRIME                 "FEC"
83 #define CONFIG_FEC_MXC_PHYADDR          0x7
84 #define CONFIG_PHYLIB
85 #define CONFIG_PHY_MICREL
86 #define CONFIG_PHY_MICREL_KSZ9021
87 #define CONFIG_ARP_TIMEOUT              200UL
88 #endif
89
90 /* I2C */
91 #define CONFIG_SYS_I2C
92 #define CONFIG_SYS_I2C_MXC
93 #define CONFIG_SYS_I2C_MXC_I2C1         /* enable I2C bus 1 */
94 #define CONFIG_SYS_I2C_MXC_I2C2         /* enable I2C bus 2 */
95 #define CONFIG_SYS_I2C_MXC_I2C3         /* enable I2C bus 3 */
96 #define CONFIG_I2C_MULTI_BUS
97 #define CONFIG_I2C_MXC
98 #define CONFIG_SYS_I2C_SPEED            100000
99 #define CONFIG_SYS_SPD_BUS_NUM          0
100
101 /* I2C EEPROM */
102 #ifdef CONFIG_CMD_EEPROM
103 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN  2
104 #define CONFIG_SYS_I2C_EEPROM_BUS       2
105 #endif
106
107 /* MMC Configs */
108 #define CONFIG_SYS_FSL_ESDHC_ADDR       0
109 #define CONFIG_SYS_FSL_USDHC_NUM        2
110
111 /* PCI express */
112 #ifdef CONFIG_CMD_PCI
113 #define CONFIG_PCI_SCAN_SHOW
114 #define CONFIG_PCIE_IMX
115 #define CONFIG_PCIE_IMX_PERST_GPIO      IMX_GPIO_NR(3, 29)
116 #define CONFIG_PCIE_IMX_POWER_GPIO      IMX_GPIO_NR(7, 12)
117 #endif
118
119 /* PMIC */
120 #define CONFIG_POWER
121 #define CONFIG_POWER_I2C
122 #define CONFIG_POWER_PFUZE100
123 #define CONFIG_POWER_PFUZE100_I2C_ADDR  0x08
124
125 /* SATA Configs */
126 #ifdef CONFIG_CMD_SATA
127 #define CONFIG_DWC_AHSATA
128 #define CONFIG_SYS_SATA_MAX_DEVICE      1
129 #define CONFIG_DWC_AHSATA_PORT_ID       0
130 #define CONFIG_DWC_AHSATA_BASE_ADDR     SATA_ARB_BASE_ADDR
131 #define CONFIG_LBA48
132 #define CONFIG_LIBATA
133 #endif
134
135 /* UART */
136 #define CONFIG_MXC_UART
137 #define CONFIG_MXC_UART_BASE            UART2_BASE
138
139 /* USB Configs */
140 #ifdef CONFIG_CMD_USB
141 #define CONFIG_USB_EHCI
142 #define CONFIG_USB_EHCI_MX6
143 #define CONFIG_SYS_USB_EVENT_POLL_VIA_CONTROL_EP
144 #define CONFIG_USB_HOST_ETHER
145 #define CONFIG_USB_ETHER_ASIX
146 #define CONFIG_USB_ETHER_SMSC95XX
147 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
148 #define CONFIG_MXC_USB_PORTSC           (PORT_PTS_UTMI | PORT_PTS_PTW)
149 #define CONFIG_MXC_USB_FLAGS            0
150 /* Gadget part */
151 #define CONFIG_USBD_HS
152 #define CONFIG_USB_ETHER
153 #define CONFIG_USB_ETH_CDC
154 #define CONFIG_NETCONSOLE
155 #endif
156
157 /* Video output */
158 #ifdef CONFIG_VIDEO
159 #define CONFIG_VIDEO_IPUV3
160 #define CONFIG_VIDEO_BMP_RLE8
161 #define CONFIG_SPLASH_SCREEN
162 #define CONFIG_BMP_16BPP
163 #define CONFIG_VIDEO_LOGO
164 #define CONFIG_IPUV3_CLK                260000000
165 #define CONFIG_CMD_HDMIDETECT
166 #define CONFIG_IMX_HDMI
167 #define CONFIG_IMX_VIDEO_SKIP
168 #endif
169
170 /* Extra U-Boot environment. */
171 #ifndef CONFIG_SPL_BUILD
172 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
173         "fdt_high=0xffffffff\0"                                         \
174         "initrd_high=0xffffffff\0"                                      \
175         "consdev=ttymxc1\0"                                             \
176         "baudrate=115200\0"                                             \
177         "bootdev=/dev/mmcblk0p1\0"                                      \
178         "rootdev=/dev/mmcblk0p2\0"                                      \
179         "netdev=eth0\0"                                                 \
180         "kernel_addr_r="__stringify(CONFIG_LOADADDR)"\0"                \
181         "pxefile_addr_r="__stringify(CONFIG_LOADADDR)"\0"               \
182         "scriptaddr="__stringify(CONFIG_LOADADDR)"\0"                   \
183         "ramdisk_addr_r=0x28000000\0"                                   \
184         "fdt_addr_r=0x18000000\0"                                       \
185         "fdtfile=imx6q-novena.dtb\0"                                    \
186         "addcons="                                                      \
187                 "setenv bootargs ${bootargs} "                          \
188                 "console=${consdev},${baudrate}\0"                      \
189         "addip="                                                        \
190                 "setenv bootargs ${bootargs} "                          \
191                 "ip=${ipaddr}:${serverip}:${gatewayip}:"                \
192                         "${netmask}:${hostname}:${netdev}:off\0"        \
193         "addmisc="                                                      \
194                 "setenv bootargs ${bootargs} ${miscargs}\0"             \
195         "addargs=run addcons addmisc\0"                                 \
196         "mmcload="                                                      \
197                 "mmc rescan ; "                                         \
198                 "ext4load mmc 0:1 ${kernel_addr_r} ${bootfile}\0"       \
199         "netload="                                                      \
200                 "tftp ${kernel_addr_r} ${hostname}/${bootfile}\0"       \
201         "miscargs=nohlt panic=1\0"                                      \
202         "mmcargs=setenv bootargs root=${rootdev} rw rootwait\0"         \
203         "nfsargs="                                                      \
204                 "setenv bootargs root=/dev/nfs rw "                     \
205                         "nfsroot=${serverip}:${rootpath},v3,tcp\0"      \
206         "mmc_mmc="                                                      \
207                 "run mmcload mmcargs addargs ; "                        \
208                 "bootm ${kernel_addr_r}\0"                              \
209         "mmc_nfs="                                                      \
210                 "run mmcload nfsargs addip addargs ; "                  \
211                 "bootm ${kernel_addr_r}\0"                              \
212         "net_mmc="                                                      \
213                 "run netload mmcargs addargs ; "                        \
214                 "bootm ${kernel_addr_r}\0"                              \
215         "net_nfs="                                                      \
216                 "run netload nfsargs addip addargs ; "                  \
217                 "bootm ${kernel_addr_r}\0"                              \
218         "update_sd_spl_filename=SPL\0"                                  \
219         "update_sd_uboot_filename=u-boot.img\0"                         \
220         "update_sd_firmware="   /* Update the SD firmware partition */  \
221                 "if mmc rescan ; then "                                 \
222                 "if dhcp ${update_sd_spl_filename} ; then "             \
223                 "mmc write ${loadaddr} 2 0x200 ; "                      \
224                 "fi ; "                                                 \
225                 "if dhcp ${update_sd_uboot_filename} ; then "           \
226                 "fatwrite mmc 0:1 ${loadaddr} u-boot.img ${filesize} ; "\
227                 "fi ; "                                                 \
228                 "fi\0"                                                  \
229         BOOTENV
230
231 #define BOOT_TARGET_DEVICES(func) \
232         func(MMC, mmc, 0) \
233         func(USB, usb, 0) \
234         func(SATA, sata, 0) \
235         func(PXE, pxe, na) \
236         func(DHCP, dhcp, na)
237
238 #include <config_distro_bootcmd.h>
239
240 #else
241 #define CONFIG_EXTRA_ENV_SETTINGS
242 #endif /* CONFIG_SPL_BUILD */
243
244 #endif                          /* __CONFIG_H */