usb: net: migrate CONFIG_USB_HOST_ETHER to Kconfig
[platform/kernel/u-boot.git] / include / configs / nitrogen6x.h
1 /*
2  * Copyright (C) 2010-2011 Freescale Semiconductor, Inc.
3  *
4  * Configuration settings for the Boundary Devices Nitrogen6X
5  * and Freescale i.MX6Q Sabre Lite boards.
6  *
7  * SPDX-License-Identifier:     GPL-2.0+
8  */
9
10 #ifndef __CONFIG_H
11 #define __CONFIG_H
12
13 #include "mx6_common.h"
14
15 #define CONFIG_MACH_TYPE        3769
16
17 /* Size of malloc() pool */
18 #define CONFIG_SYS_MALLOC_LEN           (10 * 1024 * 1024)
19
20 #define CONFIG_MISC_INIT_R
21 #define CONFIG_USBD_HS
22 #define CONFIG_USB_ETHER
23 #define CONFIG_USB_ETH_CDC
24 #define CONFIG_NETCONSOLE
25
26 #define CONFIG_MXC_UART
27 #define CONFIG_MXC_UART_BASE           UART2_BASE
28
29 #ifdef CONFIG_CMD_SF
30 #define CONFIG_MXC_SPI
31 #define CONFIG_SF_DEFAULT_BUS  0
32 #define CONFIG_SF_DEFAULT_CS   0
33 #define CONFIG_SF_DEFAULT_SPEED 25000000
34 #define CONFIG_SF_DEFAULT_MODE (SPI_MODE_0)
35 #endif
36
37 /* I2C Configs */
38 #define CONFIG_SYS_I2C
39 #define CONFIG_SYS_I2C_MXC
40 #define CONFIG_SYS_I2C_MXC_I2C1         /* enable I2C bus 1 */
41 #define CONFIG_SYS_I2C_MXC_I2C2         /* enable I2C bus 2 */
42 #define CONFIG_SYS_I2C_MXC_I2C3         /* enable I2C bus 3 */
43 #define CONFIG_SYS_I2C_SPEED            100000
44 #define CONFIG_I2C_EDID
45
46 /* MMC Configs */
47 #define CONFIG_SYS_FSL_ESDHC_ADDR      0
48 #define CONFIG_SYS_FSL_USDHC_NUM       2
49
50 /*
51  * SATA Configs
52  */
53 #ifdef CONFIG_CMD_SATA
54 #define CONFIG_DWC_AHSATA
55 #define CONFIG_SYS_SATA_MAX_DEVICE      1
56 #define CONFIG_DWC_AHSATA_PORT_ID       0
57 #define CONFIG_DWC_AHSATA_BASE_ADDR     SATA_ARB_BASE_ADDR
58 #define CONFIG_LBA48
59 #define CONFIG_LIBATA
60 #endif
61
62 #define CONFIG_FEC_MXC
63 #define CONFIG_MII
64 #define IMX_FEC_BASE                    ENET_BASE_ADDR
65 #define CONFIG_FEC_XCV_TYPE             RGMII
66 #define CONFIG_ETHPRIME                 "FEC"
67 #define CONFIG_FEC_MXC_PHYADDR          6
68
69 /* USB Configs */
70 #define CONFIG_USB_ETHER_ASIX
71 #define CONFIG_USB_ETHER_MCS7830
72 #define CONFIG_USB_ETHER_SMSC95XX
73 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
74 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET        /* For OTG port */
75 #define CONFIG_MXC_USB_PORTSC   (PORT_PTS_UTMI | PORT_PTS_PTW)
76 #define CONFIG_MXC_USB_FLAGS    0
77
78 /* Framebuffer and LCD */
79 #define CONFIG_VIDEO_IPUV3
80 #define CONFIG_VIDEO_BMP_RLE8
81 #define CONFIG_SPLASH_SCREEN
82 #define CONFIG_SPLASH_SCREEN_ALIGN
83 #define CONFIG_VIDEO_BMP_GZIP
84 #define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE (6 * 1024 * 1024)
85 #define CONFIG_BMP_16BPP
86 #define CONFIG_IPUV3_CLK 260000000
87 #define CONFIG_IMX_HDMI
88 #define CONFIG_IMX_VIDEO_SKIP
89
90 #define CONFIG_PREBOOT                 ""
91
92 #ifdef CONFIG_CMD_SATA
93 #define CONFIG_DRIVE_SATA "sata "
94 #else
95 #define CONFIG_DRIVE_SATA
96 #endif
97
98 #ifdef CONFIG_CMD_MMC
99 #define CONFIG_DRIVE_MMC "mmc "
100 #else
101 #define CONFIG_DRIVE_MMC
102 #endif
103
104 #ifdef CONFIG_USB_STORAGE
105 #define CONFIG_DRIVE_USB "usb "
106 #else
107 #define CONFIG_DRIVE_USB
108 #endif
109
110 #define CONFIG_DRIVE_TYPES CONFIG_DRIVE_SATA CONFIG_DRIVE_MMC CONFIG_DRIVE_USB
111 #define CONFIG_UMSDEVS CONFIG_DRIVE_SATA CONFIG_DRIVE_MMC
112
113 #if defined(CONFIG_SABRELITE)
114 #define CONFIG_EXTRA_ENV_SETTINGS \
115         "script=boot.scr\0" \
116         "uimage=uImage\0" \
117         "console=ttymxc1\0" \
118         "fdt_high=0xffffffff\0" \
119         "initrd_high=0xffffffff\0" \
120         "fdt_file=imx6q-sabrelite.dtb\0" \
121         "fdt_addr=0x18000000\0" \
122         "boot_fdt=try\0" \
123         "ip_dyn=yes\0" \
124         "usb_pgood_delay=2000\0" \
125         "mmcdevs=0 1\0" \
126         "mmcpart=1\0" \
127         "mmcroot=/dev/mmcblk0p2 rootwait rw\0" \
128         "mmcargs=setenv bootargs console=${console},${baudrate} " \
129                 "root=${mmcroot}\0" \
130         "loadbootscript=" \
131                 "load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
132         "bootscript=echo Running bootscript from mmc ...; " \
133                 "source\0" \
134         "loaduimage=load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${uimage}\0" \
135         "loadfdt=load mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
136         "mmcboot=echo Booting from mmc ...; " \
137                 "run mmcargs; " \
138                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
139                         "if run loadfdt; then " \
140                                 "bootm ${loadaddr} - ${fdt_addr}; " \
141                         "else " \
142                                 "if test ${boot_fdt} = try; then " \
143                                         "bootm; " \
144                                 "else " \
145                                         "echo WARN: Cannot load the DT; " \
146                                 "fi; " \
147                         "fi; " \
148                 "else " \
149                         "bootm; " \
150                 "fi;\0" \
151         "netargs=setenv bootargs console=${console},${baudrate} " \
152                 "root=/dev/nfs " \
153         "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
154                 "netboot=echo Booting from net ...; " \
155                 "run netargs; " \
156                 "if test ${ip_dyn} = yes; then " \
157                         "setenv get_cmd dhcp; " \
158                 "else " \
159                         "setenv get_cmd tftp; " \
160                 "fi; " \
161                 "${get_cmd} ${uimage}; " \
162                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
163                         "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
164                                 "bootm ${loadaddr} - ${fdt_addr}; " \
165                         "else " \
166                                 "if test ${boot_fdt} = try; then " \
167                                         "bootm; " \
168                                 "else " \
169                                         "echo WARN: Cannot load the DT; " \
170                                 "fi; " \
171                         "fi; " \
172                 "else " \
173                         "bootm; " \
174                 "fi;\0"
175
176 #define CONFIG_BOOTCOMMAND \
177         "for mmcdev in ${mmcdevs}; do " \
178                 "mmc dev ${mmcdev}; " \
179                 "if mmc rescan; then " \
180                         "if run loadbootscript; then " \
181                                 "run bootscript; " \
182                         "else " \
183                                 "if run loaduimage; then " \
184                                         "run mmcboot; " \
185                                 "fi; " \
186                         "fi; " \
187                 "fi; " \
188         "done; " \
189         "run netboot; "
190 #else
191 #define CONFIG_EXTRA_ENV_SETTINGS \
192         "bootdevs=" CONFIG_DRIVE_TYPES "\0" \
193         "umsdevs=" CONFIG_UMSDEVS "\0" \
194         "usb_pgood_delay=2000\0" \
195         "console=ttymxc1\0" \
196         "clearenv=if sf probe || sf probe || sf probe 1 ; then " \
197                 "sf erase 0xc0000 0x2000 && " \
198                 "echo restored environment to factory default ; fi\0" \
199         "bootcmd=for dtype in ${bootdevs}" \
200                 "; do " \
201                         "if itest.s \"xusb\" == \"x${dtype}\" ; then " \
202                                 "usb start ;" \
203                         "fi; " \
204                         "for disk in 0 1 ; do ${dtype} dev ${disk} ;" \
205                                 "load " \
206                                         "${dtype} ${disk}:1 " \
207                                         "10008000 " \
208                                         "/6x_bootscript" \
209                                         "&& source 10008000 ; " \
210                         "done ; " \
211                 "done; " \
212                 "setenv stdout serial,vga ; " \
213                 "echo ; echo 6x_bootscript not found ; " \
214                 "echo ; echo serial console at 115200, 8N1 ; echo ; " \
215                 "echo details at http://boundarydevices.com/6q_bootscript ; " \
216                 "setenv stdout serial;" \
217                 "setenv stdin serial,usbkbd;" \
218                 "for dtype in ${umsdevs} ; do " \
219                         "if itest.s sata == ${dtype}; then " \
220                                 "initcmd='sata init' ;" \
221                         "else " \
222                                 "initcmd='mmc rescan' ;" \
223                         "fi; " \
224                         "for disk in 0 1 ; do " \
225                                 "if $initcmd && $dtype dev $disk ; then " \
226                                         "setenv stdout serial,vga; " \
227                                         "echo expose ${dtype} ${disk} " \
228                                                 "over USB; " \
229                                         "ums 0 $dtype $disk ;" \
230                                 "fi; " \
231                 "       done; " \
232                 "done ;" \
233                 "setenv stdout serial,vga; " \
234                 "echo no block devices found;" \
235                 "\0" \
236         "initrd_high=0xffffffff\0" \
237         "upgradeu=for dtype in ${bootdevs}" \
238                 "; do " \
239                 "for disk in 0 1 ; do ${dtype} dev ${disk} ;" \
240                         "load ${dtype} ${disk}:1 10008000 " \
241                                 "/6x_upgrade " \
242                                 "&& source 10008000 ; " \
243                 "done ; " \
244         "done\0" \
245
246 #endif
247 /* Miscellaneous configurable options */
248 #define CONFIG_SYS_MEMTEST_START       0x10000000
249 #define CONFIG_SYS_MEMTEST_END         0x10010000
250 #define CONFIG_SYS_MEMTEST_SCRATCH     0x10800000
251
252 /* Physical Memory Map */
253 #define CONFIG_NR_DRAM_BANKS           1
254 #define PHYS_SDRAM                     MMDC0_ARB_BASE_ADDR
255
256 #define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM
257 #define CONFIG_SYS_INIT_RAM_ADDR       IRAM_BASE_ADDR
258 #define CONFIG_SYS_INIT_RAM_SIZE       IRAM_SIZE
259
260 #define CONFIG_SYS_INIT_SP_OFFSET \
261         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
262 #define CONFIG_SYS_INIT_SP_ADDR \
263         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
264
265 /* Environment organization */
266 #define CONFIG_ENV_SIZE                 (8 * 1024)
267
268 #if defined(CONFIG_ENV_IS_IN_MMC)
269 #define CONFIG_ENV_OFFSET               (6 * 64 * 1024)
270 #define CONFIG_SYS_MMC_ENV_DEV          0
271 #elif defined(CONFIG_ENV_IS_IN_SPI_FLASH)
272 #define CONFIG_ENV_OFFSET               (768 * 1024)
273 #define CONFIG_ENV_SECT_SIZE            (8 * 1024)
274 #define CONFIG_ENV_SPI_BUS              CONFIG_SF_DEFAULT_BUS
275 #define CONFIG_ENV_SPI_CS               CONFIG_SF_DEFAULT_CS
276 #define CONFIG_ENV_SPI_MODE             CONFIG_SF_DEFAULT_MODE
277 #define CONFIG_ENV_SPI_MAX_HZ           CONFIG_SF_DEFAULT_SPEED
278 #endif
279
280 #define CONFIG_SYS_ALT_MEMTEST
281
282 /*
283  * PCI express
284  */
285 #ifdef CONFIG_CMD_PCI
286 #define CONFIG_PCI_SCAN_SHOW
287 #define CONFIG_PCIE_IMX
288 #endif
289
290 #define CONFIG_USB_FUNCTION_MASS_STORAGE
291
292 #endif         /* __CONFIG_H */