include/configs/mx7ulp_evk.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright (C) 2016 Freescale Semiconductor, Inc.
   4  *
   5  * Configuration settings for the Freescale i.MX7ULP EVK board.
   6  */
   7
   8 #ifndef __MX7ULP_EVK_CONFIG_H
   9 #define __MX7ULP_EVK_CONFIG_H
  10
  11 #include <linux/sizes.h>
  12 #include <asm/arch/imx-regs.h>
  13
  14 /*Uncomment it to use secure boot*/
  15 /*#define CONFIG_SECURE_BOOT*/
  16
  17 #ifdef CONFIG_SECURE_BOOT
  18 #ifndef CONFIG_CSF_SIZE
  19 #define CONFIG_CSF_SIZE                 0x4000
  20 #endif
  21 #endif
  22
  23 #define CONFIG_BOARD_POSTCLK_INIT
  24 #define CONFIG_SYS_BOOTM_LEN            0x1000000
  25
  26 #define SRC_BASE_ADDR                   CMC1_RBASE
  27 #define IRAM_BASE_ADDR                  OCRAM_0_BASE
  28 #define IOMUXC_BASE_ADDR                IOMUXC1_RBASE
  29
  30 #define CONFIG_BOUNCE_BUFFER
  31 #define CONFIG_FSL_USDHC
  32 #define CONFIG_SUPPORT_EMMC_BOOT /* eMMC specific */
  33
  34 #define CONFIG_SYS_FSL_USDHC_NUM        1
  35
  36 #define CONFIG_SYS_FSL_ESDHC_ADDR       0
  37 #define CONFIG_SYS_MMC_ENV_DEV          0       /* USDHC1 */
  38 #define CONFIG_SYS_MMC_ENV_PART         0       /* user area */
  39 #define CONFIG_MMCROOT                  "/dev/mmcblk0p2"  /* USDHC1 */
  40 #define CONFIG_SYS_MMC_IMG_LOAD_PART    1
  41
  42 #define CONFIG_ENV_OFFSET               (12 * SZ_64K)
  43 #define CONFIG_ENV_SIZE                 SZ_8K
  44
  45 /* Using ULP WDOG for reset */
  46 #define WDOG_BASE_ADDR                  WDG1_RBASE
  47
  48 #define CONFIG_SYS_HZ_CLOCK             1000000 /* Fixed at 1Mhz from TSTMR */
  49
  50 #define CONFIG_INITRD_TAG
  51 #define CONFIG_CMDLINE_TAG
  52 #define CONFIG_SETUP_MEMORY_TAGS
  53 /*#define CONFIG_REVISION_TAG*/
  54
  55 /* Size of malloc() pool */
  56 #define CONFIG_SYS_MALLOC_LEN           (8 * SZ_1M)
  57
  58 #define CONFIG_BOARD_EARLY_INIT_F
  59
  60 /* UART */
  61 #define LPUART_BASE                     LPUART4_RBASE
  62
  63 /* allow to overwrite serial and ethaddr */
  64 #define CONFIG_ENV_OVERWRITE
  65 #define CONFIG_BAUDRATE                 115200
  66
  67 #define CONFIG_SYS_CACHELINE_SIZE      64
  68
  69 /* Miscellaneous configurable options */
  70 #define CONFIG_SYS_PROMPT               "=> "
  71 #define CONFIG_SYS_CBSIZE               512
  72
  73 #define CONFIG_SYS_MAXARGS              256
  74
  75 /* Physical Memory Map */
  76 #define CONFIG_NR_DRAM_BANKS            1
  77
  78 #define PHYS_SDRAM                      0x60000000
  79 #define PHYS_SDRAM_SIZE                 SZ_1G
  80 #define CONFIG_SYS_MEMTEST_START        PHYS_SDRAM
  81 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM
  82
  83 #define CONFIG_LOADADDR             0x60800000
  84
  85 #define CONFIG_SYS_MEMTEST_END      0x9E000000
  86
  87 #define CONFIG_EXTRA_ENV_SETTINGS \
  88         "script=boot.scr\0" \
  89         "image=zImage\0" \
  90         "console=ttyLP0\0" \
  91         "fdt_high=0xffffffff\0" \
  92         "initrd_high=0xffffffff\0" \
  93         "fdt_file=imx7ulp-evk.dtb\0" \
  94         "fdt_addr=0x63000000\0" \
  95         "boot_fdt=try\0" \
  96         "earlycon=lpuart32,0x402D0010\0" \
  97         "ip_dyn=yes\0" \
  98         "mmcdev="__stringify(CONFIG_SYS_MMC_ENV_DEV)"\0" \
  99         "mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \
 100         "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
 101         "mmcautodetect=yes\0" \
 102         "mmcargs=setenv bootargs console=${console},${baudrate} " \
 103                 "root=${mmcroot}\0" \
 104         "loadbootscript=" \
 105                 "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
 106         "bootscript=echo Running bootscript from mmc ...; " \
 107                 "source\0" \
 108         "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
 109         "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
 110         "mmcboot=echo Booting from mmc ...; " \
 111                 "run mmcargs; " \
 112                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 113                         "if run loadfdt; then " \
 114                                 "bootz ${loadaddr} - ${fdt_addr}; " \
 115                         "else " \
 116                                 "if test ${boot_fdt} = try; then " \
 117                                         "bootz; " \
 118                                 "else " \
 119                                         "echo WARN: Cannot load the DT; " \
 120                                 "fi; " \
 121                         "fi; " \
 122                 "else " \
 123                         "bootz; " \
 124                 "fi;\0" \
 125         "netargs=setenv bootargs console=${console},${baudrate} " \
 126                 "root=/dev/nfs " \
 127                 "ip=:::::eth0:dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
 128         "netboot=echo Booting from net ...; " \
 129                 "run netargs; " \
 130                 "if test ${ip_dyn} = yes; then " \
 131                         "setenv get_cmd dhcp; " \
 132                 "else " \
 133                         "setenv get_cmd tftp; " \
 134                 "fi; " \
 135                 "usb start; "\
 136                 "${get_cmd} ${image}; " \
 137                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 138                         "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
 139                                 "bootz ${loadaddr} - ${fdt_addr}; " \
 140                         "else " \
 141                                 "if test ${boot_fdt} = try; then " \
 142                                         "bootz; " \
 143                                 "else " \
 144                                         "echo WARN: Cannot load the DT; " \
 145                                 "fi; " \
 146                         "fi; " \
 147                 "else " \
 148                         "bootz; " \
 149                 "fi;\0" \
 150
 151 #define CONFIG_BOOTCOMMAND \
 152            "mmc dev ${mmcdev}; if mmc rescan; then " \
 153                    "if run loadbootscript; then " \
 154                            "run bootscript; " \
 155                    "else " \
 156                            "if run loadimage; then " \
 157                                    "run mmcboot; " \
 158                            "fi; " \
 159                    "fi; " \
 160            "fi"
 161
 162 #define CONFIG_SYS_HZ                   1000
 163 #define CONFIG_SYS_LOAD_ADDR            CONFIG_LOADADDR
 164
 165 #define CONFIG_SYS_INIT_RAM_ADDR        IRAM_BASE_ADDR
 166 #define CONFIG_SYS_INIT_RAM_SIZE        SZ_256K
 167
 168 #define CONFIG_SYS_INIT_SP_OFFSET \
 169         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 170 #define CONFIG_SYS_INIT_SP_ADDR \
 171         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 172
 173 #ifndef CONFIG_SYS_DCACHE_OFF
 174 #define CONFIG_CMD_CACHE
 175 #endif
 176
 177 #endif  /* __CONFIG_H */