include/configs/mx7dsabresd.h

   1 /*
   2  * Copyright (C) 2015 Freescale Semiconductor, Inc.
   3  *
   4  * Configuration settings for the Freescale i.MX7D SABRESD board.
   5  *
   6  * SPDX-License-Identifier:     GPL-2.0+
   7  */
   8
   9 #ifndef __MX7D_SABRESD_CONFIG_H
  10 #define __MX7D_SABRESD_CONFIG_H
  11
  12 #include "mx7_common.h"
  13
  14 #define CONFIG_DBG_MONITOR
  15 #define PHYS_SDRAM_SIZE                 SZ_1G
  16
  17 #define CONFIG_MXC_UART_BASE            UART1_IPS_BASE_ADDR
  18
  19 /* Size of malloc() pool */
  20 #define CONFIG_SYS_MALLOC_LEN           (32 * SZ_1M)
  21
  22 #define CONFIG_BOARD_EARLY_INIT_F
  23 #define CONFIG_BOARD_LATE_INIT
  24
  25 #define CONFIG_DISPLAY_BOARDINFO
  26
  27 /* Uncomment to enable secure boot support */
  28 /* #define CONFIG_SECURE_BOOT */
  29 #define CONFIG_CSF_SIZE                 0x4000
  30
  31 /* Network */
  32 #define CONFIG_FEC_MXC
  33 #define CONFIG_MII
  34 #define CONFIG_FEC_XCV_TYPE             RGMII
  35 #define CONFIG_ETHPRIME                 "FEC"
  36 #define CONFIG_FEC_MXC_PHYADDR          0
  37
  38 #define CONFIG_PHYLIB
  39 #define CONFIG_PHY_BROADCOM
  40 /* ENET1 */
  41 #define IMX_FEC_BASE                    ENET_IPS_BASE_ADDR
  42
  43 /* MMC Config*/
  44 #define CONFIG_SYS_FSL_ESDHC_ADDR       0
  45
  46 /* PMIC */
  47 #define CONFIG_POWER
  48 #define CONFIG_POWER_I2C
  49 #define CONFIG_POWER_PFUZE3000
  50 #define CONFIG_POWER_PFUZE3000_I2C_ADDR 0x08
  51
  52 #undef CONFIG_BOOTM_NETBSD
  53 #undef CONFIG_BOOTM_PLAN9
  54 #undef CONFIG_BOOTM_RTEMS
  55
  56 /* I2C configs */
  57 #define CONFIG_SYS_I2C
  58 #define CONFIG_SYS_I2C_MXC
  59 #define CONFIG_SYS_I2C_MXC_I2C1         /* enable I2C bus 1 */
  60 #define CONFIG_SYS_I2C_SPEED            100000
  61
  62 #define CONFIG_SUPPORT_EMMC_BOOT        /* eMMC specific */
  63 #define CONFIG_SYS_MMC_IMG_LOAD_PART    1
  64
  65 #ifdef CONFIG_IMX_BOOTAUX
  66 /* Set to QSPI1 A flash at default */
  67 #define CONFIG_SYS_AUXCORE_BOOTDATA 0x60000000
  68
  69 #define UPDATE_M4_ENV \
  70         "m4image=m4_qspi.bin\0" \
  71         "loadm4image=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${m4image}\0" \
  72         "update_m4_from_sd=" \
  73                 "if sf probe 0:0; then " \
  74                         "if run loadm4image; then " \
  75                                 "setexpr fw_sz ${filesize} + 0xffff; " \
  76                                 "setexpr fw_sz ${fw_sz} / 0x10000; "    \
  77                                 "setexpr fw_sz ${fw_sz} * 0x10000; "    \
  78                                 "sf erase 0x0 ${fw_sz}; " \
  79                                 "sf write ${loadaddr} 0x0 ${filesize}; " \
  80                         "fi; " \
  81                 "fi\0" \
  82         "m4boot=sf probe 0:0; bootaux "__stringify(CONFIG_SYS_AUXCORE_BOOTDATA)"\0"
  83 #else
  84 #define UPDATE_M4_ENV ""
  85 #endif
  86
  87 #define CONFIG_MFG_ENV_SETTINGS \
  88         "mfgtool_args=setenv bootargs console=${console},${baudrate} " \
  89                 "rdinit=/linuxrc " \
  90                 "g_mass_storage.stall=0 g_mass_storage.removable=1 " \
  91                 "g_mass_storage.idVendor=0x066F g_mass_storage.idProduct=0x37FF "\
  92                 "g_mass_storage.iSerialNumber=\"\" "\
  93                 "clk_ignore_unused "\
  94                 "\0" \
  95         "initrd_addr=0x83800000\0" \
  96         "initrd_high=0xffffffff\0" \
  97         "bootcmd_mfg=run mfgtool_args;bootz ${loadaddr} ${initrd_addr} ${fdt_addr};\0" \
  98
  99 #define CONFIG_DFU_ENV_SETTINGS \
 100         "dfu_alt_info=image raw 0 0x800000;"\
 101                 "u-boot raw 0 0x4000;"\
 102                 "bootimg part 0 1;"\
 103                 "rootfs part 0 2\0" \
 104
 105 #define CONFIG_EXTRA_ENV_SETTINGS \
 106         UPDATE_M4_ENV \
 107         CONFIG_MFG_ENV_SETTINGS \
 108         CONFIG_DFU_ENV_SETTINGS \
 109         "script=boot.scr\0" \
 110         "image=zImage\0" \
 111         "console=ttymxc0\0" \
 112         "fdt_high=0xffffffff\0" \
 113         "initrd_high=0xffffffff\0" \
 114         "fdt_file=imx7d-sdb.dtb\0" \
 115         "fdt_addr=0x83000000\0" \
 116         "boot_fdt=try\0" \
 117         "ip_dyn=yes\0" \
 118         "videomode=video=ctfb:x:480,y:272,depth:24,pclk:108695,le:8,ri:4,up:2,lo:4,hs:41,vs:10,sync:0,vmode:0\0" \
 119         "mmcdev="__stringify(CONFIG_SYS_MMC_ENV_DEV)"\0" \
 120         "mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \
 121         "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
 122         "mmcautodetect=yes\0" \
 123         "mmcargs=setenv bootargs console=${console},${baudrate} " \
 124                 "root=${mmcroot}\0" \
 125         "loadbootscript=" \
 126                 "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
 127         "bootscript=echo Running bootscript from mmc ...; " \
 128                 "source\0" \
 129         "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
 130         "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
 131         "mmcboot=echo Booting from mmc ...; " \
 132                 "run mmcargs; " \
 133                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 134                         "if run loadfdt; then " \
 135                                 "bootz ${loadaddr} - ${fdt_addr}; " \
 136                         "else " \
 137                                 "if test ${boot_fdt} = try; then " \
 138                                         "bootz; " \
 139                                 "else " \
 140                                         "echo WARN: Cannot load the DT; " \
 141                                 "fi; " \
 142                         "fi; " \
 143                 "else " \
 144                         "bootz; " \
 145                 "fi;\0" \
 146         "netargs=setenv bootargs console=${console},${baudrate} " \
 147                 "root=/dev/nfs " \
 148         "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
 149                 "netboot=echo Booting from net ...; " \
 150                 "run netargs; " \
 151                 "if test ${ip_dyn} = yes; then " \
 152                         "setenv get_cmd dhcp; " \
 153                 "else " \
 154                         "setenv get_cmd tftp; " \
 155                 "fi; " \
 156                 "${get_cmd} ${image}; " \
 157                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 158                         "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
 159                                 "bootz ${loadaddr} - ${fdt_addr}; " \
 160                         "else " \
 161                                 "if test ${boot_fdt} = try; then " \
 162                                         "bootz; " \
 163                                 "else " \
 164                                         "echo WARN: Cannot load the DT; " \
 165                                 "fi; " \
 166                         "fi; " \
 167                 "else " \
 168                         "bootz; " \
 169                 "fi;\0"
 170
 171 #define CONFIG_BOOTCOMMAND \
 172            "mmc dev ${mmcdev};" \
 173            "mmc dev ${mmcdev}; if mmc rescan; then " \
 174                    "if run loadbootscript; then " \
 175                            "run bootscript; " \
 176                    "else " \
 177                            "if run loadimage; then " \
 178                                    "run mmcboot; " \
 179                            "else run netboot; " \
 180                            "fi; " \
 181                    "fi; " \
 182            "else run netboot; fi"
 183
 184 #define CONFIG_SYS_MEMTEST_START        0x80000000
 185 #define CONFIG_SYS_MEMTEST_END          (CONFIG_SYS_MEMTEST_START + 0x20000000)
 186
 187 #define CONFIG_SYS_LOAD_ADDR            CONFIG_LOADADDR
 188 #define CONFIG_SYS_HZ                   1000
 189
 190 #define CONFIG_STACKSIZE                SZ_128K
 191
 192 /* Physical Memory Map */
 193 #define CONFIG_NR_DRAM_BANKS            1
 194 #define PHYS_SDRAM                      MMDC0_ARB_BASE_ADDR
 195
 196 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM
 197 #define CONFIG_SYS_INIT_RAM_ADDR        IRAM_BASE_ADDR
 198 #define CONFIG_SYS_INIT_RAM_SIZE        IRAM_SIZE
 199
 200 #define CONFIG_SYS_INIT_SP_OFFSET \
 201         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 202 #define CONFIG_SYS_INIT_SP_ADDR \
 203         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 204
 205 /* FLASH and environment organization */
 206 #define CONFIG_SYS_NO_FLASH
 207 #define CONFIG_ENV_SIZE                 SZ_8K
 208 #define CONFIG_ENV_IS_IN_MMC
 209
 210 /*
 211  * If want to use nand, define CONFIG_NAND_MXS and rework board
 212  * to support nand, since emmc has pin conflicts with nand
 213  */
 214 #ifdef CONFIG_NAND_MXS
 215 #define CONFIG_CMD_NAND
 216 #define CONFIG_CMD_NAND_TRIMFFS
 217
 218 /* NAND stuff */
 219 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 220 #define CONFIG_SYS_NAND_BASE            0x40000000
 221 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
 222 #define CONFIG_SYS_NAND_ONFI_DETECTION
 223
 224 /* DMA stuff, needed for GPMI/MXS NAND support */
 225 #define CONFIG_APBH_DMA
 226 #define CONFIG_APBH_DMA_BURST
 227 #define CONFIG_APBH_DMA_BURST8
 228 #endif
 229
 230 #define CONFIG_ENV_OFFSET               (8 * SZ_64K)
 231 #ifdef CONFIG_NAND_MXS
 232 #define CONFIG_SYS_FSL_USDHC_NUM        1
 233 #else
 234 #define CONFIG_SYS_FSL_USDHC_NUM        2
 235 #endif
 236
 237 #define CONFIG_SYS_MMC_ENV_DEV          0   /* USDHC1 */
 238 #define CONFIG_SYS_MMC_ENV_PART         0       /* user area */
 239 #define CONFIG_MMCROOT                  "/dev/mmcblk0p2"  /* USDHC1 */
 240
 241 /* USB Configs */
 242 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 243 #define CONFIG_USB_HOST_ETHER
 244 #define CONFIG_USB_ETHER_ASIX
 245 #define CONFIG_MXC_USB_PORTSC  (PORT_PTS_UTMI | PORT_PTS_PTW)
 246 #define CONFIG_MXC_USB_FLAGS   0
 247 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
 248
 249 #define CONFIG_IMX_THERMAL
 250
 251 #define CONFIG_USBD_HS
 252
 253 #define CONFIG_USB_FUNCTION_MASS_STORAGE
 254
 255 /* USB Device Firmware Update support */
 256 #define CONFIG_USB_FUNCTION_DFU
 257 #define CONFIG_DFU_MMC
 258 #define CONFIG_DFU_RAM
 259
 260 #define CONFIG_VIDEO
 261 #ifdef CONFIG_VIDEO
 262 #define CONFIG_CFB_CONSOLE
 263 #define CONFIG_VIDEO_MXS
 264 #define CONFIG_VIDEO_LOGO
 265 #define CONFIG_VIDEO_SW_CURSOR
 266 #define CONFIG_VGA_AS_SINGLE_DEVICE
 267 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
 268 #define CONFIG_SPLASH_SCREEN
 269 #define CONFIG_SPLASH_SCREEN_ALIGN
 270 #define CONFIG_CMD_BMP
 271 #define CONFIG_BMP_16BPP
 272 #define CONFIG_VIDEO_BMP_RLE8
 273 #define CONFIG_VIDEO_BMP_LOGO
 274 #endif
 275
 276 #ifdef CONFIG_FSL_QSPI
 277 #define CONFIG_SPI_FLASH
 278 #define CONFIG_SPI_FLASH_MACRONIX
 279 #define CONFIG_SPI_FLASH_BAR
 280 #define CONFIG_SF_DEFAULT_BUS           0
 281 #define CONFIG_SF_DEFAULT_CS            0
 282 #define CONFIG_SF_DEFAULT_SPEED         40000000
 283 #define CONFIG_SF_DEFAULT_MODE          SPI_MODE_0
 284 #define FSL_QSPI_FLASH_NUM              1
 285 #define FSL_QSPI_FLASH_SIZE             SZ_64M
 286 #define QSPI0_BASE_ADDR                 QSPI1_IPS_BASE_ADDR
 287 #define QSPI0_AMBA_BASE                 QSPI0_ARB_BASE_ADDR
 288 #endif
 289
 290 #endif  /* __CONFIG_H */