include/configs/mx7dsabresd.h

   1 /*
   2  * Copyright (C) 2015 Freescale Semiconductor, Inc.
   3  *
   4  * Configuration settings for the Freescale i.MX7D SABRESD board.
   5  *
   6  * SPDX-License-Identifier:     GPL-2.0+
   7  */
   8
   9 #ifndef __MX7D_SABRESD_CONFIG_H
  10 #define __MX7D_SABRESD_CONFIG_H
  11
  12 #include "mx7_common.h"
  13
  14 #define CONFIG_DBG_MONITOR
  15 #define PHYS_SDRAM_SIZE                 SZ_1G
  16
  17 #define CONFIG_MXC_UART_BASE            UART1_IPS_BASE_ADDR
  18
  19 /* Size of malloc() pool */
  20 #define CONFIG_SYS_MALLOC_LEN           (32 * SZ_1M)
  21
  22 /* Network */
  23 #define CONFIG_FEC_MXC
  24 #define CONFIG_MII
  25 #define CONFIG_FEC_XCV_TYPE             RGMII
  26 #define CONFIG_ETHPRIME                 "FEC"
  27 #define CONFIG_FEC_MXC_PHYADDR          0
  28
  29 #define CONFIG_PHYLIB
  30 #define CONFIG_PHY_BROADCOM
  31 /* ENET1 */
  32 #define IMX_FEC_BASE                    ENET_IPS_BASE_ADDR
  33
  34 /* MMC Config*/
  35 #define CONFIG_SYS_FSL_ESDHC_ADDR       0
  36
  37 /* PMIC */
  38 #define CONFIG_POWER
  39 #define CONFIG_POWER_I2C
  40 #define CONFIG_POWER_PFUZE3000
  41 #define CONFIG_POWER_PFUZE3000_I2C_ADDR 0x08
  42
  43 #undef CONFIG_BOOTM_NETBSD
  44 #undef CONFIG_BOOTM_PLAN9
  45 #undef CONFIG_BOOTM_RTEMS
  46
  47 /* I2C configs */
  48 #define CONFIG_SYS_I2C
  49 #define CONFIG_SYS_I2C_MXC
  50 #define CONFIG_SYS_I2C_MXC_I2C1         /* enable I2C bus 1 */
  51 #define CONFIG_SYS_I2C_SPEED            100000
  52
  53 #define CONFIG_SUPPORT_EMMC_BOOT        /* eMMC specific */
  54 #define CONFIG_SYS_MMC_IMG_LOAD_PART    1
  55
  56 #ifdef CONFIG_IMX_BOOTAUX
  57 /* Set to QSPI1 A flash at default */
  58 #define CONFIG_SYS_AUXCORE_BOOTDATA 0x60000000
  59
  60 #define UPDATE_M4_ENV \
  61         "m4image=m4_qspi.bin\0" \
  62         "loadm4image=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${m4image}\0" \
  63         "update_m4_from_sd=" \
  64                 "if sf probe 0:0; then " \
  65                         "if run loadm4image; then " \
  66                                 "setexpr fw_sz ${filesize} + 0xffff; " \
  67                                 "setexpr fw_sz ${fw_sz} / 0x10000; "    \
  68                                 "setexpr fw_sz ${fw_sz} * 0x10000; "    \
  69                                 "sf erase 0x0 ${fw_sz}; " \
  70                                 "sf write ${loadaddr} 0x0 ${filesize}; " \
  71                         "fi; " \
  72                 "fi\0" \
  73         "m4boot=sf probe 0:0; bootaux "__stringify(CONFIG_SYS_AUXCORE_BOOTDATA)"\0"
  74 #else
  75 #define UPDATE_M4_ENV ""
  76 #endif
  77
  78 #define CONFIG_MFG_ENV_SETTINGS \
  79         "mfgtool_args=setenv bootargs console=${console},${baudrate} " \
  80                 "rdinit=/linuxrc " \
  81                 "g_mass_storage.stall=0 g_mass_storage.removable=1 " \
  82                 "g_mass_storage.idVendor=0x066F g_mass_storage.idProduct=0x37FF "\
  83                 "g_mass_storage.iSerialNumber=\"\" "\
  84                 "clk_ignore_unused "\
  85                 "\0" \
  86         "initrd_addr=0x83800000\0" \
  87         "initrd_high=0xffffffff\0" \
  88         "bootcmd_mfg=run mfgtool_args;bootz ${loadaddr} ${initrd_addr} ${fdt_addr};\0" \
  89
  90 #define CONFIG_DFU_ENV_SETTINGS \
  91         "dfu_alt_info=image raw 0 0x800000;"\
  92                 "u-boot raw 0 0x4000;"\
  93                 "bootimg part 0 1;"\
  94                 "rootfs part 0 2\0" \
  95
  96 #define CONFIG_EXTRA_ENV_SETTINGS \
  97         UPDATE_M4_ENV \
  98         CONFIG_MFG_ENV_SETTINGS \
  99         CONFIG_DFU_ENV_SETTINGS \
 100         "script=boot.scr\0" \
 101         "image=zImage\0" \
 102         "console=ttymxc0\0" \
 103         "fdt_high=0xffffffff\0" \
 104         "initrd_high=0xffffffff\0" \
 105         "fdt_file=imx7d-sdb.dtb\0" \
 106         "fdt_addr=0x83000000\0" \
 107         "boot_fdt=try\0" \
 108         "ip_dyn=yes\0" \
 109         "videomode=video=ctfb:x:480,y:272,depth:24,pclk:108695,le:8,ri:4,up:2,lo:4,hs:41,vs:10,sync:0,vmode:0\0" \
 110         "mmcdev="__stringify(CONFIG_SYS_MMC_ENV_DEV)"\0" \
 111         "mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \
 112         "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
 113         "mmcautodetect=yes\0" \
 114         "mmcargs=setenv bootargs console=${console},${baudrate} " \
 115                 "root=${mmcroot}\0" \
 116         "loadbootscript=" \
 117                 "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
 118         "bootscript=echo Running bootscript from mmc ...; " \
 119                 "source\0" \
 120         "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
 121         "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
 122         "mmcboot=echo Booting from mmc ...; " \
 123                 "run mmcargs; " \
 124                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 125                         "if run loadfdt; then " \
 126                                 "bootz ${loadaddr} - ${fdt_addr}; " \
 127                         "else " \
 128                                 "if test ${boot_fdt} = try; then " \
 129                                         "bootz; " \
 130                                 "else " \
 131                                         "echo WARN: Cannot load the DT; " \
 132                                 "fi; " \
 133                         "fi; " \
 134                 "else " \
 135                         "bootz; " \
 136                 "fi;\0" \
 137         "netargs=setenv bootargs console=${console},${baudrate} " \
 138                 "root=/dev/nfs " \
 139         "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
 140                 "netboot=echo Booting from net ...; " \
 141                 "run netargs; " \
 142                 "if test ${ip_dyn} = yes; then " \
 143                         "setenv get_cmd dhcp; " \
 144                 "else " \
 145                         "setenv get_cmd tftp; " \
 146                 "fi; " \
 147                 "${get_cmd} ${image}; " \
 148                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 149                         "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
 150                                 "bootz ${loadaddr} - ${fdt_addr}; " \
 151                         "else " \
 152                                 "if test ${boot_fdt} = try; then " \
 153                                         "bootz; " \
 154                                 "else " \
 155                                         "echo WARN: Cannot load the DT; " \
 156                                 "fi; " \
 157                         "fi; " \
 158                 "else " \
 159                         "bootz; " \
 160                 "fi;\0"
 161
 162 #define CONFIG_BOOTCOMMAND \
 163            "mmc dev ${mmcdev};" \
 164            "mmc dev ${mmcdev}; if mmc rescan; then " \
 165                    "if run loadbootscript; then " \
 166                            "run bootscript; " \
 167                    "else " \
 168                            "if run loadimage; then " \
 169                                    "run mmcboot; " \
 170                            "else run netboot; " \
 171                            "fi; " \
 172                    "fi; " \
 173            "else run netboot; fi"
 174
 175 #define CONFIG_SYS_MEMTEST_START        0x80000000
 176 #define CONFIG_SYS_MEMTEST_END          (CONFIG_SYS_MEMTEST_START + 0x20000000)
 177
 178 #define CONFIG_SYS_LOAD_ADDR            CONFIG_LOADADDR
 179 #define CONFIG_SYS_HZ                   1000
 180
 181 #define CONFIG_STACKSIZE                SZ_128K
 182
 183 /* Physical Memory Map */
 184 #define CONFIG_NR_DRAM_BANKS            1
 185 #define PHYS_SDRAM                      MMDC0_ARB_BASE_ADDR
 186
 187 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM
 188 #define CONFIG_SYS_INIT_RAM_ADDR        IRAM_BASE_ADDR
 189 #define CONFIG_SYS_INIT_RAM_SIZE        IRAM_SIZE
 190
 191 #define CONFIG_SYS_INIT_SP_OFFSET \
 192         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 193 #define CONFIG_SYS_INIT_SP_ADDR \
 194         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 195
 196 /* environment organization */
 197 #define CONFIG_ENV_SIZE                 SZ_8K
 198 #define CONFIG_ENV_IS_IN_MMC
 199
 200 /* MXC SPI driver support */
 201 #define CONFIG_MXC_SPI
 202
 203 /*
 204  * If want to use nand, define CONFIG_NAND_MXS and rework board
 205  * to support nand, since emmc has pin conflicts with nand
 206  */
 207 #ifdef CONFIG_NAND_MXS
 208 #define CONFIG_CMD_NAND
 209 #define CONFIG_CMD_NAND_TRIMFFS
 210
 211 /* NAND stuff */
 212 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 213 #define CONFIG_SYS_NAND_BASE            0x40000000
 214 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
 215 #define CONFIG_SYS_NAND_ONFI_DETECTION
 216
 217 /* DMA stuff, needed for GPMI/MXS NAND support */
 218 #define CONFIG_APBH_DMA
 219 #define CONFIG_APBH_DMA_BURST
 220 #define CONFIG_APBH_DMA_BURST8
 221 #endif
 222
 223 #define CONFIG_ENV_OFFSET               (8 * SZ_64K)
 224 #ifdef CONFIG_NAND_MXS
 225 #define CONFIG_SYS_FSL_USDHC_NUM        1
 226 #else
 227 #define CONFIG_SYS_FSL_USDHC_NUM        2
 228 #endif
 229
 230 #define CONFIG_SYS_MMC_ENV_DEV          0   /* USDHC1 */
 231 #define CONFIG_SYS_MMC_ENV_PART         0       /* user area */
 232 #define CONFIG_MMCROOT                  "/dev/mmcblk0p2"  /* USDHC1 */
 233
 234 /* USB Configs */
 235 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 236 #define CONFIG_USB_HOST_ETHER
 237 #define CONFIG_USB_ETHER_ASIX
 238 #define CONFIG_MXC_USB_PORTSC  (PORT_PTS_UTMI | PORT_PTS_PTW)
 239 #define CONFIG_MXC_USB_FLAGS   0
 240 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
 241
 242 #define CONFIG_IMX_THERMAL
 243
 244 #define CONFIG_USBD_HS
 245
 246 #define CONFIG_USB_FUNCTION_MASS_STORAGE
 247
 248 #ifdef CONFIG_VIDEO
 249 #define CONFIG_VIDEO_MXS
 250 #define CONFIG_VIDEO_LOGO
 251 #define CONFIG_SPLASH_SCREEN
 252 #define CONFIG_SPLASH_SCREEN_ALIGN
 253 #define CONFIG_CMD_BMP
 254 #define CONFIG_BMP_16BPP
 255 #define CONFIG_VIDEO_BMP_RLE8
 256 #define CONFIG_VIDEO_BMP_LOGO
 257 #endif
 258
 259 #ifdef CONFIG_FSL_QSPI
 260 #define CONFIG_SPI_FLASH
 261 #define CONFIG_SPI_FLASH_MACRONIX
 262 #define CONFIG_SPI_FLASH_BAR
 263 #define CONFIG_SF_DEFAULT_BUS           0
 264 #define CONFIG_SF_DEFAULT_CS            0
 265 #define CONFIG_SF_DEFAULT_SPEED         40000000
 266 #define CONFIG_SF_DEFAULT_MODE          SPI_MODE_0
 267 #define FSL_QSPI_FLASH_NUM              1
 268 #define FSL_QSPI_FLASH_SIZE             SZ_64M
 269 #define QSPI0_BASE_ADDR                 QSPI1_IPS_BASE_ADDR
 270 #define QSPI0_AMBA_BASE                 QSPI0_ARB_BASE_ADDR
 271 #endif
 272
 273 #endif  /* __CONFIG_H */