include/configs/mx7dsabresd.h

   1 /*
   2  * Copyright (C) 2015 Freescale Semiconductor, Inc.
   3  *
   4  * Configuration settings for the Freescale i.MX7D SABRESD board.
   5  *
   6  * SPDX-License-Identifier:     GPL-2.0+
   7  */
   8
   9 #ifndef __MX7D_SABRESD_CONFIG_H
  10 #define __MX7D_SABRESD_CONFIG_H
  11
  12 #include "mx7_common.h"
  13
  14 #define CONFIG_DBG_MONITOR
  15 #define PHYS_SDRAM_SIZE                 SZ_1G
  16
  17 #define CONFIG_MXC_UART_BASE            UART1_IPS_BASE_ADDR
  18
  19 /* Size of malloc() pool */
  20 #define CONFIG_SYS_MALLOC_LEN           (32 * SZ_1M)
  21
  22 /* Network */
  23 #define CONFIG_FEC_MXC
  24 #define CONFIG_MII
  25 #define CONFIG_FEC_XCV_TYPE             RGMII
  26 #define CONFIG_ETHPRIME                 "FEC"
  27 #define CONFIG_FEC_MXC_PHYADDR          0
  28
  29 #define CONFIG_PHY_BROADCOM
  30 /* ENET1 */
  31 #define IMX_FEC_BASE                    ENET_IPS_BASE_ADDR
  32
  33 /* MMC Config*/
  34 #define CONFIG_SYS_FSL_ESDHC_ADDR       0
  35
  36 #undef CONFIG_BOOTM_NETBSD
  37 #undef CONFIG_BOOTM_PLAN9
  38 #undef CONFIG_BOOTM_RTEMS
  39
  40 /* I2C configs */
  41 #define CONFIG_SYS_I2C_MXC
  42 #define CONFIG_SYS_I2C_SPEED            100000
  43
  44 #define CONFIG_SUPPORT_EMMC_BOOT        /* eMMC specific */
  45 #define CONFIG_SYS_MMC_IMG_LOAD_PART    1
  46
  47 #ifdef CONFIG_IMX_BOOTAUX
  48 /* Set to QSPI1 A flash at default */
  49 #define CONFIG_SYS_AUXCORE_BOOTDATA 0x60000000
  50
  51 #define UPDATE_M4_ENV \
  52         "m4image=m4_qspi.bin\0" \
  53         "loadm4image=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${m4image}\0" \
  54         "update_m4_from_sd=" \
  55                 "if sf probe 0:0; then " \
  56                         "if run loadm4image; then " \
  57                                 "setexpr fw_sz ${filesize} + 0xffff; " \
  58                                 "setexpr fw_sz ${fw_sz} / 0x10000; "    \
  59                                 "setexpr fw_sz ${fw_sz} * 0x10000; "    \
  60                                 "sf erase 0x0 ${fw_sz}; " \
  61                                 "sf write ${loadaddr} 0x0 ${filesize}; " \
  62                         "fi; " \
  63                 "fi\0" \
  64         "m4boot=sf probe 0:0; bootaux "__stringify(CONFIG_SYS_AUXCORE_BOOTDATA)"\0"
  65 #else
  66 #define UPDATE_M4_ENV ""
  67 #endif
  68
  69 #define CONFIG_MFG_ENV_SETTINGS \
  70         "mfgtool_args=setenv bootargs console=${console},${baudrate} " \
  71                 "rdinit=/linuxrc " \
  72                 "g_mass_storage.stall=0 g_mass_storage.removable=1 " \
  73                 "g_mass_storage.idVendor=0x066F g_mass_storage.idProduct=0x37FF "\
  74                 "g_mass_storage.iSerialNumber=\"\" "\
  75                 "clk_ignore_unused "\
  76                 "\0" \
  77         "initrd_addr=0x83800000\0" \
  78         "initrd_high=0xffffffff\0" \
  79         "bootcmd_mfg=run mfgtool_args;bootz ${loadaddr} ${initrd_addr} ${fdt_addr};\0" \
  80
  81 #define CONFIG_DFU_ENV_SETTINGS \
  82         "dfu_alt_info=image raw 0 0x800000;"\
  83                 "u-boot raw 0 0x4000;"\
  84                 "bootimg part 0 1;"\
  85                 "rootfs part 0 2\0" \
  86
  87 #define CONFIG_EXTRA_ENV_SETTINGS \
  88         UPDATE_M4_ENV \
  89         CONFIG_MFG_ENV_SETTINGS \
  90         CONFIG_DFU_ENV_SETTINGS \
  91         "script=boot.scr\0" \
  92         "image=zImage\0" \
  93         "console=ttymxc0\0" \
  94         "fdt_high=0xffffffff\0" \
  95         "initrd_high=0xffffffff\0" \
  96         "fdt_file=imx7d-sdb.dtb\0" \
  97         "fdt_addr=0x83000000\0" \
  98         "boot_fdt=try\0" \
  99         "ip_dyn=yes\0" \
 100         "videomode=video=ctfb:x:480,y:272,depth:24,pclk:108695,le:8,ri:4,up:2,lo:4,hs:41,vs:10,sync:0,vmode:0\0" \
 101         "mmcdev="__stringify(CONFIG_SYS_MMC_ENV_DEV)"\0" \
 102         "mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \
 103         "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
 104         "mmcautodetect=yes\0" \
 105         "mmcargs=setenv bootargs console=${console},${baudrate} " \
 106                 "root=${mmcroot}\0" \
 107         "loadbootscript=" \
 108                 "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
 109         "bootscript=echo Running bootscript from mmc ...; " \
 110                 "source\0" \
 111         "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
 112         "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
 113         "mmcboot=echo Booting from mmc ...; " \
 114                 "run mmcargs; " \
 115                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 116                         "if run loadfdt; then " \
 117                                 "bootz ${loadaddr} - ${fdt_addr}; " \
 118                         "else " \
 119                                 "if test ${boot_fdt} = try; then " \
 120                                         "bootz; " \
 121                                 "else " \
 122                                         "echo WARN: Cannot load the DT; " \
 123                                 "fi; " \
 124                         "fi; " \
 125                 "else " \
 126                         "bootz; " \
 127                 "fi;\0" \
 128         "netargs=setenv bootargs console=${console},${baudrate} " \
 129                 "root=/dev/nfs " \
 130         "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
 131                 "netboot=echo Booting from net ...; " \
 132                 "run netargs; " \
 133                 "if test ${ip_dyn} = yes; then " \
 134                         "setenv get_cmd dhcp; " \
 135                 "else " \
 136                         "setenv get_cmd tftp; " \
 137                 "fi; " \
 138                 "${get_cmd} ${image}; " \
 139                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 140                         "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
 141                                 "bootz ${loadaddr} - ${fdt_addr}; " \
 142                         "else " \
 143                                 "if test ${boot_fdt} = try; then " \
 144                                         "bootz; " \
 145                                 "else " \
 146                                         "echo WARN: Cannot load the DT; " \
 147                                 "fi; " \
 148                         "fi; " \
 149                 "else " \
 150                         "bootz; " \
 151                 "fi;\0"
 152
 153 #define CONFIG_BOOTCOMMAND \
 154            "mmc dev ${mmcdev};" \
 155            "mmc dev ${mmcdev}; if mmc rescan; then " \
 156                    "if run loadbootscript; then " \
 157                            "run bootscript; " \
 158                    "else " \
 159                            "if run loadimage; then " \
 160                                    "run mmcboot; " \
 161                            "else run netboot; " \
 162                            "fi; " \
 163                    "fi; " \
 164            "else run netboot; fi"
 165
 166 #define CONFIG_SYS_MEMTEST_START        0x80000000
 167 #define CONFIG_SYS_MEMTEST_END          (CONFIG_SYS_MEMTEST_START + 0x20000000)
 168
 169 #define CONFIG_SYS_LOAD_ADDR            CONFIG_LOADADDR
 170 #define CONFIG_SYS_HZ                   1000
 171
 172 /* Physical Memory Map */
 173 #define CONFIG_NR_DRAM_BANKS            1
 174 #define PHYS_SDRAM                      MMDC0_ARB_BASE_ADDR
 175
 176 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM
 177 #define CONFIG_SYS_INIT_RAM_ADDR        IRAM_BASE_ADDR
 178 #define CONFIG_SYS_INIT_RAM_SIZE        IRAM_SIZE
 179
 180 #define CONFIG_SYS_INIT_SP_OFFSET \
 181         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 182 #define CONFIG_SYS_INIT_SP_ADDR \
 183         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 184
 185 /* environment organization */
 186 #define CONFIG_ENV_SIZE                 SZ_8K
 187
 188 /*
 189  * If want to use nand, define CONFIG_NAND_MXS and rework board
 190  * to support nand, since emmc has pin conflicts with nand
 191  */
 192 #ifdef CONFIG_NAND_MXS
 193 /* NAND stuff */
 194 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 195 #define CONFIG_SYS_NAND_BASE            0x40000000
 196 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
 197 #define CONFIG_SYS_NAND_ONFI_DETECTION
 198
 199 /* DMA stuff, needed for GPMI/MXS NAND support */
 200 #define CONFIG_APBH_DMA
 201 #define CONFIG_APBH_DMA_BURST
 202 #define CONFIG_APBH_DMA_BURST8
 203 #endif
 204
 205 #define CONFIG_ENV_OFFSET               (12 * SZ_64K)
 206 #ifdef CONFIG_NAND_MXS
 207 #define CONFIG_SYS_FSL_USDHC_NUM        1
 208 #else
 209 #define CONFIG_SYS_FSL_USDHC_NUM        2
 210 #endif
 211
 212 #define CONFIG_SYS_MMC_ENV_DEV          0   /* USDHC1 */
 213 #define CONFIG_SYS_MMC_ENV_PART         0       /* user area */
 214 #define CONFIG_MMCROOT                  "/dev/mmcblk0p2"  /* USDHC1 */
 215
 216 /* USB Configs */
 217 #define CONFIG_MXC_USB_PORTSC  (PORT_PTS_UTMI | PORT_PTS_PTW)
 218
 219 #define CONFIG_IMX_THERMAL
 220
 221 #define CONFIG_USBD_HS
 222
 223 #define CONFIG_USB_FUNCTION_MASS_STORAGE
 224
 225 #ifdef CONFIG_VIDEO
 226 #define CONFIG_VIDEO_MXS
 227 #define CONFIG_VIDEO_LOGO
 228 #define CONFIG_SPLASH_SCREEN
 229 #define CONFIG_SPLASH_SCREEN_ALIGN
 230 #define CONFIG_BMP_16BPP
 231 #define CONFIG_VIDEO_BMP_RLE8
 232 #define CONFIG_VIDEO_BMP_LOGO
 233 #endif
 234
 235 #ifdef CONFIG_FSL_QSPI
 236 #define CONFIG_SPI_FLASH
 237 #define CONFIG_SPI_FLASH_MACRONIX
 238 #define CONFIG_SPI_FLASH_BAR
 239 #define CONFIG_SF_DEFAULT_BUS           0
 240 #define CONFIG_SF_DEFAULT_CS            0
 241 #define CONFIG_SF_DEFAULT_SPEED         40000000
 242 #define CONFIG_SF_DEFAULT_MODE          SPI_MODE_0
 243 #define FSL_QSPI_FLASH_NUM              1
 244 #define FSL_QSPI_FLASH_SIZE             SZ_64M
 245 #define QSPI0_BASE_ADDR                 QSPI1_IPS_BASE_ADDR
 246 #define QSPI0_AMBA_BASE                 QSPI0_ARB_BASE_ADDR
 247 #endif
 248
 249 #endif  /* __CONFIG_H */