include/configs/mx6ullevk.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright (C) 2016 Freescale Semiconductor, Inc.
   4  *
   5  * Configuration settings for the Freescale i.MX6UL 14x14 EVK board.
   6  */
   7 #ifndef __MX6ULLEVK_CONFIG_H
   8 #define __MX6ULLEVK_CONFIG_H
   9
  10
  11 #include <asm/arch/imx-regs.h>
  12 #include <linux/sizes.h>
  13 #include <linux/stringify.h>
  14 #include "mx6_common.h"
  15 #include <asm/mach-imx/gpio.h>
  16
  17 #define PHYS_SDRAM_SIZE SZ_512M
  18
  19 /* Size of malloc() pool */
  20 #define CONFIG_SYS_MALLOC_LEN           (16 * SZ_1M)
  21
  22 #define CONFIG_MXC_UART
  23 #define CONFIG_MXC_UART_BASE            UART1_BASE
  24
  25 /* MMC Configs */
  26 #ifdef CONFIG_FSL_USDHC
  27 #define CONFIG_SYS_FSL_ESDHC_ADDR       USDHC2_BASE_ADDR
  28
  29 /* NAND pin conflicts with usdhc2 */
  30 #ifdef CONFIG_SYS_USE_NAND
  31 #define CONFIG_SYS_FSL_USDHC_NUM        1
  32 #else
  33 #define CONFIG_SYS_FSL_USDHC_NUM        2
  34 #endif
  35 #endif
  36
  37 /* I2C configs */
  38 #ifdef CONFIG_CMD_I2C
  39 #define CONFIG_SYS_I2C_MXC
  40 #define CONFIG_SYS_I2C_MXC_I2C1         /* enable I2C bus 1 */
  41 #define CONFIG_SYS_I2C_MXC_I2C2         /* enable I2C bus 2 */
  42 #define CONFIG_SYS_I2C_SPEED            100000
  43 #endif
  44
  45 #define CONFIG_SYS_MMC_IMG_LOAD_PART    1
  46
  47 #define CONFIG_EXTRA_ENV_SETTINGS \
  48         "script=boot.scr\0" \
  49         "image=zImage\0" \
  50         "console=ttymxc0\0" \
  51         "fdt_high=0xffffffff\0" \
  52         "initrd_high=0xffffffff\0" \
  53         "fdt_file=undefined\0" \
  54         "fdt_addr=0x83000000\0" \
  55         "boot_fdt=try\0" \
  56         "ip_dyn=yes\0" \
  57         "videomode=video=ctfb:x:480,y:272,depth:24,pclk:108695,le:8,ri:4,up:2,lo:4,hs:41,vs:10,sync:0,vmode:0\0" \
  58         "mmcdev="__stringify(CONFIG_SYS_MMC_ENV_DEV)"\0" \
  59         "mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \
  60         "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
  61         "mmcautodetect=yes\0" \
  62         "mmcargs=setenv bootargs console=${console},${baudrate} " \
  63                 "root=${mmcroot}\0" \
  64         "loadbootscript=" \
  65                 "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
  66         "bootscript=echo Running bootscript from mmc ...; " \
  67                 "source\0" \
  68         "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
  69         "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
  70         "mmcboot=echo Booting from mmc ...; " \
  71                 "run mmcargs; " \
  72                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
  73                         "if run loadfdt; then " \
  74                                 "bootz ${loadaddr} - ${fdt_addr}; " \
  75                         "else " \
  76                                 "if test ${boot_fdt} = try; then " \
  77                                         "bootz; " \
  78                                 "else " \
  79                                         "echo WARN: Cannot load the DT; " \
  80                                 "fi; " \
  81                         "fi; " \
  82                 "else " \
  83                         "bootz; " \
  84                 "fi;\0" \
  85                 "findfdt="\
  86                         "if test $fdt_file = undefined; then " \
  87                                 "if test $board_name = ULZ-EVK && test $board_rev = 14X14; then " \
  88                                         "setenv fdt_file imx6ulz-14x14-evk.dtb; fi; " \
  89                                 "if test $board_name = EVK && test $board_rev = 14X14; then " \
  90                                         "setenv fdt_file imx6ull-14x14-evk.dtb; fi; " \
  91                                 "if test $fdt_file = undefined; then " \
  92                                         "echo WARNING: Could not determine dtb to use; " \
  93                                 "fi; " \
  94                         "fi;\0" \
  95         "netargs=setenv bootargs console=${console},${baudrate} " \
  96                 "root=/dev/nfs " \
  97         "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
  98                 "netboot=echo Booting from net ...; " \
  99                 "run netargs; " \
 100                 "if test ${ip_dyn} = yes; then " \
 101                         "setenv get_cmd dhcp; " \
 102                 "else " \
 103                         "setenv get_cmd tftp; " \
 104                 "fi; " \
 105                 "${get_cmd} ${image}; " \
 106                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 107                         "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
 108                                 "bootz ${loadaddr} - ${fdt_addr}; " \
 109                         "else " \
 110                                 "if test ${boot_fdt} = try; then " \
 111                                         "bootz; " \
 112                                 "else " \
 113                                         "echo WARN: Cannot load the DT; " \
 114                                 "fi; " \
 115                         "fi; " \
 116                 "else " \
 117                         "bootz; " \
 118                 "fi;\0" \
 119
 120 #define CONFIG_BOOTCOMMAND \
 121            "run findfdt;" \
 122            "mmc dev ${mmcdev};" \
 123            "mmc dev ${mmcdev}; if mmc rescan; then " \
 124                    "if run loadbootscript; then " \
 125                            "run bootscript; " \
 126                    "else " \
 127                            "if run loadimage; then " \
 128                                    "run mmcboot; " \
 129                            "else run netboot; " \
 130                            "fi; " \
 131                    "fi; " \
 132            "else run netboot; fi"
 133
 134 /* Miscellaneous configurable options */
 135
 136 #define CONFIG_SYS_LOAD_ADDR            CONFIG_LOADADDR
 137 #define CONFIG_SYS_HZ                   1000
 138
 139 /* Physical Memory Map */
 140 #define PHYS_SDRAM                      MMDC0_ARB_BASE_ADDR
 141
 142 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM
 143 #define CONFIG_SYS_INIT_RAM_ADDR        IRAM_BASE_ADDR
 144 #define CONFIG_SYS_INIT_RAM_SIZE        IRAM_SIZE
 145
 146 #define CONFIG_SYS_INIT_SP_OFFSET \
 147         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 148 #define CONFIG_SYS_INIT_SP_ADDR \
 149         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 150
 151 /* environment organization */
 152 #define CONFIG_SYS_MMC_ENV_DEV          1       /* USDHC2 */
 153 #define CONFIG_SYS_MMC_ENV_PART         0       /* user area */
 154 #define CONFIG_MMCROOT                  "/dev/mmcblk1p2"  /* USDHC2 */
 155
 156 #define CONFIG_IMX_THERMAL
 157
 158 #define CONFIG_IOMUX_LPSR
 159
 160 #define CONFIG_SOFT_SPI
 161
 162 #ifdef CONFIG_CMD_NET
 163 #define CONFIG_FEC_ENET_DEV             1
 164 #if (CONFIG_FEC_ENET_DEV == 0)
 165 #define CONFIG_ETHPRIME                 "eth0"
 166 #elif (CONFIG_FEC_ENET_DEV == 1)
 167 #define CONFIG_ETHPRIME                 "eth1"
 168 #endif
 169 #endif
 170
 171 #endif