include/configs/mx6ul_14x14_evk.h

   1 /*
   2  * Copyright (C) 2015 Freescale Semiconductor, Inc.
   3  *
   4  * Configuration settings for the Freescale i.MX6UL 14x14 EVK board.
   5  *
   6  * SPDX-License-Identifier:     GPL-2.0+
   7  */
   8 #ifndef __MX6UL_14X14_EVK_CONFIG_H
   9 #define __MX6UL_14X14_EVK_CONFIG_H
  10
  11 #include <asm/arch/imx-regs.h>
  12 #include <linux/sizes.h>
  13 #include "mx6_common.h"
  14 #include <asm/imx-common/gpio.h>
  15
  16 #define is_mx6ul_9x9_evk()      CONFIG_IS_ENABLED(TARGET_MX6UL_9X9_EVK)
  17
  18 /* SPL options */
  19 #define CONFIG_SPL_MMC_SUPPORT
  20 #include "imx6_spl.h"
  21
  22 #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
  23
  24 #define CONFIG_DISPLAY_CPUINFO
  25 #define CONFIG_DISPLAY_BOARDINFO
  26
  27 /* Size of malloc() pool */
  28 #define CONFIG_SYS_MALLOC_LEN           (16 * SZ_1M)
  29
  30 #define CONFIG_BOARD_EARLY_INIT_F
  31 #define CONFIG_BOARD_LATE_INIT
  32
  33 #define CONFIG_MXC_UART
  34 #define CONFIG_MXC_UART_BASE            UART1_BASE
  35
  36 /* MMC Configs */
  37 #ifdef CONFIG_FSL_USDHC
  38 #define CONFIG_SYS_FSL_ESDHC_ADDR       USDHC2_BASE_ADDR
  39
  40 /* NAND pin conflicts with usdhc2 */
  41 #ifdef CONFIG_NAND_MXS
  42 #define CONFIG_SYS_FSL_USDHC_NUM        1
  43 #else
  44 #define CONFIG_SYS_FSL_USDHC_NUM        2
  45 #endif
  46
  47 #endif
  48
  49 /* I2C configs */
  50 #ifdef CONFIG_CMD_I2C
  51 #define CONFIG_SYS_I2C
  52 #define CONFIG_SYS_I2C_MXC
  53 #define CONFIG_SYS_I2C_MXC_I2C1         /* enable I2C bus 1 */
  54 #define CONFIG_SYS_I2C_MXC_I2C2         /* enable I2C bus 2 */
  55 #define CONFIG_SYS_I2C_SPEED            100000
  56
  57 /* PMIC only for 9X9 EVK */
  58 #define CONFIG_POWER
  59 #define CONFIG_POWER_I2C
  60 #define CONFIG_POWER_PFUZE3000
  61 #define CONFIG_POWER_PFUZE3000_I2C_ADDR  0x08
  62 #endif
  63
  64 #define CONFIG_SYS_MMC_IMG_LOAD_PART    1
  65
  66 #define CONFIG_EXTRA_ENV_SETTINGS \
  67         "script=boot.scr\0" \
  68         "image=zImage\0" \
  69         "console=ttymxc0\0" \
  70         "fdt_high=0xffffffff\0" \
  71         "initrd_high=0xffffffff\0" \
  72         "fdt_file=undefined\0" \
  73         "fdt_addr=0x83000000\0" \
  74         "boot_fdt=try\0" \
  75         "ip_dyn=yes\0" \
  76         "videomode=video=ctfb:x:480,y:272,depth:24,pclk:108695,le:8,ri:4,up:2,lo:4,hs:41,vs:10,sync:0,vmode:0\0" \
  77         "mmcdev="__stringify(CONFIG_SYS_MMC_ENV_DEV)"\0" \
  78         "mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \
  79         "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
  80         "mmcautodetect=yes\0" \
  81         "mmcargs=setenv bootargs console=${console},${baudrate} " \
  82                 "root=${mmcroot}\0" \
  83         "loadbootscript=" \
  84                 "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
  85         "bootscript=echo Running bootscript from mmc ...; " \
  86                 "source\0" \
  87         "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
  88         "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
  89         "mmcboot=echo Booting from mmc ...; " \
  90                 "run mmcargs; " \
  91                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
  92                         "if run loadfdt; then " \
  93                                 "bootz ${loadaddr} - ${fdt_addr}; " \
  94                         "else " \
  95                                 "if test ${boot_fdt} = try; then " \
  96                                         "bootz; " \
  97                                 "else " \
  98                                         "echo WARN: Cannot load the DT; " \
  99                                 "fi; " \
 100                         "fi; " \
 101                 "else " \
 102                         "bootz; " \
 103                 "fi;\0" \
 104         "netargs=setenv bootargs console=${console},${baudrate} " \
 105                 "root=/dev/nfs " \
 106         "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
 107                 "netboot=echo Booting from net ...; " \
 108                 "run netargs; " \
 109                 "if test ${ip_dyn} = yes; then " \
 110                         "setenv get_cmd dhcp; " \
 111                 "else " \
 112                         "setenv get_cmd tftp; " \
 113                 "fi; " \
 114                 "${get_cmd} ${image}; " \
 115                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 116                         "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
 117                                 "bootz ${loadaddr} - ${fdt_addr}; " \
 118                         "else " \
 119                                 "if test ${boot_fdt} = try; then " \
 120                                         "bootz; " \
 121                                 "else " \
 122                                         "echo WARN: Cannot load the DT; " \
 123                                 "fi; " \
 124                         "fi; " \
 125                 "else " \
 126                         "bootz; " \
 127                 "fi;\0" \
 128                 "findfdt="\
 129                         "if test $fdt_file = undefined; then " \
 130                                 "if test $board_name = EVK && test $board_rev = 9X9; then " \
 131                                         "setenv fdt_file imx6ul-9x9-evk.dtb; fi; " \
 132                                 "if test $board_name = EVK && test $board_rev = 14X14; then " \
 133                                         "setenv fdt_file imx6ul-14x14-evk.dtb; fi; " \
 134                                 "if test $fdt_file = undefined; then " \
 135                                         "echo WARNING: Could not determine dtb to use; fi; " \
 136                         "fi;\0" \
 137
 138 #define CONFIG_BOOTCOMMAND \
 139            "run findfdt;" \
 140            "mmc dev ${mmcdev};" \
 141            "mmc dev ${mmcdev}; if mmc rescan; then " \
 142                    "if run loadbootscript; then " \
 143                            "run bootscript; " \
 144                    "else " \
 145                            "if run loadimage; then " \
 146                                    "run mmcboot; " \
 147                            "else run netboot; " \
 148                            "fi; " \
 149                    "fi; " \
 150            "else run netboot; fi"
 151
 152 /* Miscellaneous configurable options */
 153 #define CONFIG_SYS_MEMTEST_START        0x80000000
 154 #define CONFIG_SYS_MEMTEST_END          (CONFIG_SYS_MEMTEST_START + 0x8000000)
 155
 156 #define CONFIG_SYS_LOAD_ADDR            CONFIG_LOADADDR
 157 #define CONFIG_SYS_HZ                   1000
 158
 159 #define CONFIG_CMDLINE_EDITING
 160 #define CONFIG_STACKSIZE                SZ_128K
 161
 162 /* Physical Memory Map */
 163 #define CONFIG_NR_DRAM_BANKS            1
 164 #define PHYS_SDRAM                      MMDC0_ARB_BASE_ADDR
 165
 166 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM
 167 #define CONFIG_SYS_INIT_RAM_ADDR        IRAM_BASE_ADDR
 168 #define CONFIG_SYS_INIT_RAM_SIZE        IRAM_SIZE
 169
 170 #define CONFIG_SYS_INIT_SP_OFFSET \
 171         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 172 #define CONFIG_SYS_INIT_SP_ADDR \
 173         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 174
 175 /* FLASH and environment organization */
 176 #define CONFIG_SYS_NO_FLASH
 177
 178 #define CONFIG_ENV_SIZE                 SZ_8K
 179 #define CONFIG_ENV_IS_IN_MMC
 180 #define CONFIG_ENV_OFFSET               (8 * SZ_64K)
 181 #define CONFIG_SYS_MMC_ENV_DEV          1   /* USDHC2 */
 182 #define CONFIG_SYS_MMC_ENV_PART         0       /* user area */
 183 #define CONFIG_MMCROOT                  "/dev/mmcblk1p2"  /* USDHC2 */
 184
 185 #define CONFIG_CMD_BMODE
 186
 187 #ifndef CONFIG_SYS_DCACHE_OFF
 188 #endif
 189
 190 #define CONFIG_FSL_QSPI
 191 #ifdef CONFIG_FSL_QSPI
 192 #define CONFIG_SPI_FLASH
 193 #define CONFIG_SPI_FLASH_BAR
 194 #define CONFIG_SF_DEFAULT_BUS           0
 195 #define CONFIG_SF_DEFAULT_CS            0
 196 #define CONFIG_SF_DEFAULT_SPEED 40000000
 197 #define CONFIG_SF_DEFAULT_MODE          SPI_MODE_0
 198 #define CONFIG_SPI_FLASH_STMICRO
 199 #define FSL_QSPI_FLASH_NUM              1
 200 #define FSL_QSPI_FLASH_SIZE             SZ_32M
 201 #endif
 202
 203 /* USB Configs */
 204 #ifdef CONFIG_CMD_USB
 205 #define CONFIG_USB_EHCI
 206 #define CONFIG_USB_EHCI_MX6
 207 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 208 #define CONFIG_MXC_USB_PORTSC  (PORT_PTS_UTMI | PORT_PTS_PTW)
 209 #define CONFIG_MXC_USB_FLAGS   0
 210 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
 211 #endif
 212
 213 #ifdef CONFIG_CMD_NET
 214 #define CONFIG_FEC_MXC
 215 #define CONFIG_MII
 216 #define CONFIG_FEC_ENET_DEV             1
 217
 218 #if (CONFIG_FEC_ENET_DEV == 0)
 219 #define IMX_FEC_BASE                    ENET_BASE_ADDR
 220 #define CONFIG_FEC_MXC_PHYADDR          0x2
 221 #define CONFIG_FEC_XCV_TYPE             RMII
 222 #elif (CONFIG_FEC_ENET_DEV == 1)
 223 #define IMX_FEC_BASE                    ENET2_BASE_ADDR
 224 #define CONFIG_FEC_MXC_PHYADDR          0x1
 225 #define CONFIG_FEC_XCV_TYPE             RMII
 226 #endif
 227 #define CONFIG_ETHPRIME                 "FEC"
 228
 229 #define CONFIG_PHYLIB
 230 #define CONFIG_PHY_MICREL
 231 #endif
 232
 233 #define CONFIG_IMX_THERMAL
 234
 235 #ifndef CONFIG_SPL_BUILD
 236 #define CONFIG_VIDEO
 237 #ifdef CONFIG_VIDEO
 238 #define CONFIG_CFB_CONSOLE
 239 #define CONFIG_VIDEO_MXS
 240 #define CONFIG_VIDEO_LOGO
 241 #define CONFIG_VIDEO_SW_CURSOR
 242 #define CONFIG_VGA_AS_SINGLE_DEVICE
 243 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
 244 #define CONFIG_SPLASH_SCREEN
 245 #define CONFIG_SPLASH_SCREEN_ALIGN
 246 #define CONFIG_CMD_BMP
 247 #define CONFIG_BMP_16BPP
 248 #define CONFIG_VIDEO_BMP_RLE8
 249 #define CONFIG_VIDEO_BMP_LOGO
 250 #define MXS_LCDIF_BASE MX6UL_LCDIF1_BASE_ADDR
 251 #endif
 252 #endif
 253
 254 #endif