include/configs/mx6sxsabresd.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright 2014 Freescale Semiconductor, Inc.
   4  *
   5  * Configuration settings for the Freescale i.MX6SX Sabresd board.
   6  */
   7
   8 #ifndef __CONFIG_H
   9 #define __CONFIG_H
  10
  11 #include <linux/stringify.h>
  12
  13 #include "mx6_common.h"
  14
  15 #ifdef CONFIG_SPL
  16 #include "imx6_spl.h"
  17 #endif
  18
  19 #define CONFIG_MXC_UART_BASE            UART1_BASE
  20
  21 #ifdef CONFIG_IMX_BOOTAUX
  22 /* Set to QSPI2 B flash at default */
  23 #define CONFIG_SYS_AUXCORE_BOOTDATA 0x78000000
  24
  25 #define UPDATE_M4_ENV \
  26         "m4image=m4_qspi.bin\0" \
  27         "loadm4image=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${m4image}\0" \
  28         "update_m4_from_sd=" \
  29                 "if sf probe 1:0; then " \
  30                         "if run loadm4image; then " \
  31                                 "setexpr fw_sz ${filesize} + 0xffff; " \
  32                                 "setexpr fw_sz ${fw_sz} / 0x10000; "    \
  33                                 "setexpr fw_sz ${fw_sz} * 0x10000; "    \
  34                                 "sf erase 0x0 ${fw_sz}; " \
  35                                 "sf write ${loadaddr} 0x0 ${filesize}; " \
  36                         "fi; " \
  37                 "fi\0" \
  38         "m4boot=sf probe 1:0; bootaux "__stringify(CONFIG_SYS_AUXCORE_BOOTDATA)"\0"
  39 #else
  40 #define UPDATE_M4_ENV ""
  41 #endif
  42
  43 #define CONFIG_EXTRA_ENV_SETTINGS \
  44         UPDATE_M4_ENV \
  45         "script=boot.scr\0" \
  46         "image=zImage\0" \
  47         "console=ttymxc0\0" \
  48         "fdt_high=0xffffffff\0" \
  49         "initrd_high=0xffffffff\0" \
  50         "fdt_file=imx6sx-sdb.dtb\0" \
  51         "fdt_addr=0x88000000\0" \
  52         "boot_fdt=try\0" \
  53         "ip_dyn=yes\0" \
  54         "videomode=video=ctfb:x:800,y:480,depth:24,pclk:29850,le:89,ri:164,up:23,lo:10,hs:10,vs:10,sync:0,vmode:0\0" \
  55         "mmcdev=3\0" \
  56         "mmcpart=1\0" \
  57         "finduuid=part uuid mmc ${mmcdev}:2 uuid\0" \
  58         "mmcargs=setenv bootargs console=${console},${baudrate} " \
  59                 "root=PARTUUID=${uuid} rootwait rw\0" \
  60         "loadbootscript=" \
  61                 "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
  62         "bootscript=echo Running bootscript from mmc ...; " \
  63                 "source\0" \
  64         "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
  65         "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
  66         "mmcboot=echo Booting from mmc ...; " \
  67                 "run finduuid; " \
  68                 "run mmcargs; " \
  69                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
  70                         "if run loadfdt; then " \
  71                                 "bootz ${loadaddr} - ${fdt_addr}; " \
  72                         "else " \
  73                                 "if test ${boot_fdt} = try; then " \
  74                                         "bootz; " \
  75                                 "else " \
  76                                         "echo WARN: Cannot load the DT; " \
  77                                 "fi; " \
  78                         "fi; " \
  79                 "else " \
  80                         "bootz; " \
  81                 "fi;\0" \
  82         "netargs=setenv bootargs console=${console},${baudrate} " \
  83                 "root=/dev/nfs " \
  84         "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
  85                 "netboot=echo Booting from net ...; " \
  86                 "run netargs; " \
  87                 "if test ${ip_dyn} = yes; then " \
  88                         "setenv get_cmd dhcp; " \
  89                 "else " \
  90                         "setenv get_cmd tftp; " \
  91                 "fi; " \
  92                 "${get_cmd} ${image}; " \
  93                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
  94                         "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
  95                                 "bootz ${loadaddr} - ${fdt_addr}; " \
  96                         "else " \
  97                                 "if test ${boot_fdt} = try; then " \
  98                                         "bootz; " \
  99                                 "else " \
 100                                         "echo WARN: Cannot load the DT; " \
 101                                 "fi; " \
 102                         "fi; " \
 103                 "else " \
 104                         "bootz; " \
 105                 "fi;\0" \
 106         "findfdt="\
 107                 "if test test $board_rev = REVA ; then " \
 108                         "setenv fdt_file imx6sx-sdb-reva.dtb; fi; " \
 109
 110 /* Miscellaneous configurable options */
 111
 112 /* Physical Memory Map */
 113 #define PHYS_SDRAM                      MMDC0_ARB_BASE_ADDR
 114
 115 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM
 116 #define CONFIG_SYS_INIT_RAM_ADDR        IRAM_BASE_ADDR
 117 #define CONFIG_SYS_INIT_RAM_SIZE        IRAM_SIZE
 118
 119 #define CONFIG_SYS_INIT_SP_OFFSET \
 120         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 121 #define CONFIG_SYS_INIT_SP_ADDR \
 122         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 123
 124 /* MMC Configuration */
 125 #define CONFIG_SYS_FSL_ESDHC_ADDR       USDHC4_BASE_ADDR
 126
 127 /* Network */
 128
 129 #define IMX_FEC_BASE                    ENET_BASE_ADDR
 130 #define CONFIG_FEC_MXC_PHYADDR          0x1
 131
 132 #define CONFIG_FEC_XCV_TYPE             RGMII
 133 #define CONFIG_ETHPRIME                 "FEC"
 134
 135 #ifdef CONFIG_CMD_USB
 136 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 137 #define CONFIG_MXC_USB_PORTSC  (PORT_PTS_UTMI | PORT_PTS_PTW)
 138 #define CONFIG_MXC_USB_FLAGS   0
 139 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
 140 #endif
 141
 142 #ifdef CONFIG_CMD_PCI
 143 #define CONFIG_PCI_SCAN_SHOW
 144 #define CONFIG_PCIE_IMX
 145 #define CONFIG_PCIE_IMX_PERST_GPIO      IMX_GPIO_NR(2, 0)
 146 #define CONFIG_PCIE_IMX_POWER_GPIO      IMX_GPIO_NR(2, 1)
 147 #endif
 148
 149 #ifndef CONFIG_SPL_BUILD
 150 #ifdef CONFIG_DM_VIDEO
 151 #define CONFIG_VIDEO_LOGO
 152 #define CONFIG_VIDEO_BMP_LOGO
 153 #define MXS_LCDIF_BASE MX6SX_LCDIF1_BASE_ADDR
 154 #endif
 155 #endif
 156
 157 #define CONFIG_SYS_FSL_USDHC_NUM        3
 158
 159 #endif                          /* __CONFIG_H */