include/configs/mx6sxsabresd.h

   1 /*
   2  * Copyright 2014 Freescale Semiconductor, Inc.
   3  *
   4  * Configuration settings for the Freescale i.MX6SX Sabresd board.
   5  *
   6  * SPDX-License-Identifier:     GPL-2.0+
   7  */
   8
   9
  10 #ifndef __CONFIG_H
  11 #define __CONFIG_H
  12
  13 #include "mx6_common.h"
  14
  15 #ifdef CONFIG_SPL
  16 #define CONFIG_SPL_LIBCOMMON_SUPPORT
  17 #define CONFIG_SPL_MMC_SUPPORT
  18 #include "imx6_spl.h"
  19 #endif
  20
  21 /* Size of malloc() pool */
  22 #define CONFIG_SYS_MALLOC_LEN           (3 * SZ_1M)
  23
  24 #define CONFIG_BOARD_EARLY_INIT_F
  25
  26 #define CONFIG_MXC_UART
  27 #define CONFIG_MXC_UART_BASE            UART1_BASE
  28
  29 #ifdef CONFIG_IMX_BOOTAUX
  30 /* Set to QSPI2 B flash at default */
  31 #define CONFIG_SYS_AUXCORE_BOOTDATA 0x78000000
  32
  33 #define UPDATE_M4_ENV \
  34         "m4image=m4_qspi.bin\0" \
  35         "loadm4image=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${m4image}\0" \
  36         "update_m4_from_sd=" \
  37                 "if sf probe 1:0; then " \
  38                         "if run loadm4image; then " \
  39                                 "setexpr fw_sz ${filesize} + 0xffff; " \
  40                                 "setexpr fw_sz ${fw_sz} / 0x10000; "    \
  41                                 "setexpr fw_sz ${fw_sz} * 0x10000; "    \
  42                                 "sf erase 0x0 ${fw_sz}; " \
  43                                 "sf write ${loadaddr} 0x0 ${filesize}; " \
  44                         "fi; " \
  45                 "fi\0" \
  46         "m4boot=sf probe 1:0; bootaux "__stringify(CONFIG_SYS_AUXCORE_BOOTDATA)"\0"
  47 #else
  48 #define UPDATE_M4_ENV ""
  49 #endif
  50
  51 #define CONFIG_EXTRA_ENV_SETTINGS \
  52         UPDATE_M4_ENV \
  53         "script=boot.scr\0" \
  54         "image=zImage\0" \
  55         "console=ttymxc0\0" \
  56         "fdt_high=0xffffffff\0" \
  57         "initrd_high=0xffffffff\0" \
  58         "fdt_file=imx6sx-sdb.dtb\0" \
  59         "fdt_addr=0x88000000\0" \
  60         "boot_fdt=try\0" \
  61         "ip_dyn=yes\0" \
  62         "videomode=video=ctfb:x:800,y:480,depth:24,pclk:29850,le:89,ri:164,up:23,lo:10,hs:10,vs:10,sync:0,vmode:0\0" \
  63         "mmcdev=2\0" \
  64         "mmcpart=1\0" \
  65         "mmcroot=/dev/mmcblk0p2 rootwait rw\0" \
  66         "mmcargs=setenv bootargs console=${console},${baudrate} " \
  67                 "root=${mmcroot}\0" \
  68         "loadbootscript=" \
  69                 "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
  70         "bootscript=echo Running bootscript from mmc ...; " \
  71                 "source\0" \
  72         "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
  73         "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
  74         "mmcboot=echo Booting from mmc ...; " \
  75                 "run mmcargs; " \
  76                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
  77                         "if run loadfdt; then " \
  78                                 "bootz ${loadaddr} - ${fdt_addr}; " \
  79                         "else " \
  80                                 "if test ${boot_fdt} = try; then " \
  81                                         "bootz; " \
  82                                 "else " \
  83                                         "echo WARN: Cannot load the DT; " \
  84                                 "fi; " \
  85                         "fi; " \
  86                 "else " \
  87                         "bootz; " \
  88                 "fi;\0" \
  89         "netargs=setenv bootargs console=${console},${baudrate} " \
  90                 "root=/dev/nfs " \
  91         "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
  92                 "netboot=echo Booting from net ...; " \
  93                 "run netargs; " \
  94                 "if test ${ip_dyn} = yes; then " \
  95                         "setenv get_cmd dhcp; " \
  96                 "else " \
  97                         "setenv get_cmd tftp; " \
  98                 "fi; " \
  99                 "${get_cmd} ${image}; " \
 100                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 101                         "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
 102                                 "bootz ${loadaddr} - ${fdt_addr}; " \
 103                         "else " \
 104                                 "if test ${boot_fdt} = try; then " \
 105                                         "bootz; " \
 106                                 "else " \
 107                                         "echo WARN: Cannot load the DT; " \
 108                                 "fi; " \
 109                         "fi; " \
 110                 "else " \
 111                         "bootz; " \
 112                 "fi;\0"
 113
 114 #define CONFIG_BOOTCOMMAND \
 115            "mmc dev ${mmcdev};" \
 116            "mmc dev ${mmcdev}; if mmc rescan; then " \
 117                    "if run loadbootscript; then " \
 118                            "run bootscript; " \
 119                    "else " \
 120                            "if run loadimage; then " \
 121                                    "run mmcboot; " \
 122                            "else run netboot; " \
 123                            "fi; " \
 124                    "fi; " \
 125            "else run netboot; fi"
 126
 127 /* Miscellaneous configurable options */
 128 #define CONFIG_SYS_MEMTEST_START        0x80000000
 129 #define CONFIG_SYS_MEMTEST_END          (CONFIG_SYS_MEMTEST_START + 0x10000)
 130
 131 #define CONFIG_STACKSIZE                SZ_128K
 132
 133 /* Physical Memory Map */
 134 #define CONFIG_NR_DRAM_BANKS            1
 135 #define PHYS_SDRAM                      MMDC0_ARB_BASE_ADDR
 136 #define PHYS_SDRAM_SIZE                 SZ_1G
 137
 138 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM
 139 #define CONFIG_SYS_INIT_RAM_ADDR        IRAM_BASE_ADDR
 140 #define CONFIG_SYS_INIT_RAM_SIZE        IRAM_SIZE
 141
 142 #define CONFIG_SYS_INIT_SP_OFFSET \
 143         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 144 #define CONFIG_SYS_INIT_SP_ADDR \
 145         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 146
 147 /* MMC Configuration */
 148 #define CONFIG_SYS_FSL_ESDHC_ADDR       USDHC4_BASE_ADDR
 149
 150 /* I2C Configs */
 151 #define CONFIG_SYS_I2C
 152 #define CONFIG_SYS_I2C_MXC
 153 #define CONFIG_SYS_I2C_MXC_I2C1         /* enable I2C bus 1 */
 154 #define CONFIG_SYS_I2C_MXC_I2C2         /* enable I2C bus 2 */
 155 #define CONFIG_SYS_I2C_MXC_I2C3         /* enable I2C bus 3 */
 156 #define CONFIG_SYS_I2C_SPEED              100000
 157
 158 /* PMIC */
 159 #define CONFIG_POWER
 160 #define CONFIG_POWER_I2C
 161 #define CONFIG_POWER_PFUZE100
 162 #define CONFIG_POWER_PFUZE100_I2C_ADDR  0x08
 163
 164 /* Network */
 165 #define CONFIG_CMD_MII
 166 #define CONFIG_FEC_MXC
 167 #define CONFIG_MII
 168
 169 #define IMX_FEC_BASE                    ENET_BASE_ADDR
 170 #define CONFIG_FEC_MXC_PHYADDR          0x1
 171
 172 #define CONFIG_FEC_XCV_TYPE             RGMII
 173 #define CONFIG_ETHPRIME                 "FEC"
 174
 175 #define CONFIG_PHYLIB
 176 #define CONFIG_PHY_ATHEROS
 177
 178
 179 #ifdef CONFIG_CMD_USB
 180 #define CONFIG_USB_EHCI
 181 #define CONFIG_USB_EHCI_MX6
 182 #define CONFIG_USB_STORAGE
 183 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 184 #define CONFIG_USB_HOST_ETHER
 185 #define CONFIG_USB_ETHER_ASIX
 186 #define CONFIG_MXC_USB_PORTSC  (PORT_PTS_UTMI | PORT_PTS_PTW)
 187 #define CONFIG_MXC_USB_FLAGS   0
 188 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
 189 #endif
 190
 191 #define CONFIG_CMD_PCI
 192 #ifdef CONFIG_CMD_PCI
 193 #define CONFIG_PCI
 194 #define CONFIG_PCI_PNP
 195 #define CONFIG_PCI_SCAN_SHOW
 196 #define CONFIG_PCIE_IMX
 197 #define CONFIG_PCIE_IMX_PERST_GPIO      IMX_GPIO_NR(2, 0)
 198 #define CONFIG_PCIE_IMX_POWER_GPIO      IMX_GPIO_NR(2, 1)
 199 #endif
 200
 201 #define CONFIG_IMX_THERMAL
 202
 203
 204
 205 #ifdef CONFIG_FSL_QSPI
 206 #define CONFIG_SYS_FSL_QSPI_LE
 207 #define CONFIG_SYS_FSL_QSPI_AHB
 208 #ifdef CONFIG_MX6SX_SABRESD_REVA
 209 #define FSL_QSPI_FLASH_SIZE             SZ_16M
 210 #else
 211 #define FSL_QSPI_FLASH_SIZE             SZ_32M
 212 #endif
 213 #define FSL_QSPI_FLASH_NUM              2
 214 #endif
 215
 216 #ifndef CONFIG_SPL_BUILD
 217 #define CONFIG_VIDEO
 218 #ifdef CONFIG_VIDEO
 219 #define CONFIG_CFB_CONSOLE
 220 #define CONFIG_VIDEO_MXS
 221 #define CONFIG_VIDEO_LOGO
 222 #define CONFIG_VIDEO_SW_CURSOR
 223 #define CONFIG_VGA_AS_SINGLE_DEVICE
 224 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
 225 #define CONFIG_SPLASH_SCREEN
 226 #define CONFIG_SPLASH_SCREEN_ALIGN
 227 #define CONFIG_CMD_BMP
 228 #define CONFIG_BMP_16BPP
 229 #define CONFIG_VIDEO_BMP_RLE8
 230 #define CONFIG_VIDEO_BMP_LOGO
 231 #define MXS_LCDIF_BASE MX6SX_LCDIF1_BASE_ADDR
 232 #endif
 233 #endif
 234
 235 #define CONFIG_ENV_OFFSET               (8 * SZ_64K)
 236 #define CONFIG_ENV_SIZE                 SZ_8K
 237 #define CONFIG_ENV_IS_IN_MMC
 238
 239 #define CONFIG_SYS_FSL_USDHC_NUM        3
 240 #if defined(CONFIG_ENV_IS_IN_MMC)
 241 #define CONFIG_SYS_MMC_ENV_DEV          2  /*USDHC4*/
 242 #endif
 243
 244 #endif                          /* __CONFIG_H */