include/configs/mx6sxsabreauto.h

   1 /*
   2  * Copyright 2014 Freescale Semiconductor, Inc.
   3  *
   4  * Configuration settings for the Freescale i.MX6SX Sabreauto board.
   5  *
   6  * SPDX-License-Identifier:     GPL-2.0+
   7  */
   8
   9 #ifndef __CONFIG_H
  10 #define __CONFIG_H
  11
  12 #include "mx6_common.h"
  13
  14 /* Size of malloc() pool */
  15 #define CONFIG_SYS_MALLOC_LEN           (3 * SZ_1M)
  16
  17 #define CONFIG_BOARD_EARLY_INIT_F
  18 #define CONFIG_BOARD_LATE_INIT
  19
  20 #define CONFIG_MXC_UART
  21 #define CONFIG_MXC_UART_BASE            UART1_BASE
  22
  23 #define CONFIG_EXTRA_ENV_SETTINGS \
  24         "script=boot.scr\0" \
  25         "image=zImage\0" \
  26         "console=ttymxc0\0" \
  27         "fdt_high=0xffffffff\0" \
  28         "initrd_high=0xffffffff\0" \
  29         "fdt_file=imx6sx-sabreauto.dtb\0" \
  30         "fdt_addr=0x88000000\0" \
  31         "boot_fdt=try\0" \
  32         "ip_dyn=yes\0" \
  33         "mmcdev=0\0" \
  34         "mmcpart=1\0" \
  35         "mmcroot=/dev/mmcblk0p2 rootwait rw\0" \
  36         "mmcargs=setenv bootargs console=${console},${baudrate} " \
  37                 "root=${mmcroot}\0" \
  38         "loadbootscript=" \
  39                 "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
  40         "bootscript=echo Running bootscript from mmc ...; " \
  41                 "source\0" \
  42         "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
  43         "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
  44         "mmcboot=echo Booting from mmc ...; " \
  45                 "run mmcargs; " \
  46                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
  47                         "if run loadfdt; then " \
  48                                 "bootz ${loadaddr} - ${fdt_addr}; " \
  49                         "else " \
  50                                 "if test ${boot_fdt} = try; then " \
  51                                         "bootz; " \
  52                                 "else " \
  53                                         "echo WARN: Cannot load the DT; " \
  54                                 "fi; " \
  55                         "fi; " \
  56                 "else " \
  57                         "bootz; " \
  58                 "fi;\0" \
  59         "netargs=setenv bootargs console=${console},${baudrate} " \
  60                 "root=/dev/nfs " \
  61         "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
  62                 "netboot=echo Booting from net ...; " \
  63                 "run netargs; " \
  64                 "if test ${ip_dyn} = yes; then " \
  65                         "setenv get_cmd dhcp; " \
  66                 "else " \
  67                         "setenv get_cmd tftp; " \
  68                 "fi; " \
  69                 "${get_cmd} ${image}; " \
  70                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
  71                         "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
  72                                 "bootz ${loadaddr} - ${fdt_addr}; " \
  73                         "else " \
  74                                 "if test ${boot_fdt} = try; then " \
  75                                         "bootz; " \
  76                                 "else " \
  77                                         "echo WARN: Cannot load the DT; " \
  78                                 "fi; " \
  79                         "fi; " \
  80                 "else " \
  81                         "bootz; " \
  82                 "fi;\0"
  83
  84 #define CONFIG_BOOTCOMMAND \
  85            "mmc dev ${mmcdev};" \
  86            "mmc dev ${mmcdev}; if mmc rescan; then " \
  87                    "if run loadbootscript; then " \
  88                            "run bootscript; " \
  89                    "else " \
  90                            "if run loadimage; then " \
  91                                    "run mmcboot; " \
  92                            "else run netboot; " \
  93                            "fi; " \
  94                    "fi; " \
  95            "else run netboot; fi"
  96
  97 /* Miscellaneous configurable options */
  98 #define CONFIG_SYS_MEMTEST_START        0x80000000
  99 #define CONFIG_SYS_MEMTEST_END          (CONFIG_SYS_MEMTEST_START + 0x10000)
 100
 101 #define CONFIG_STACKSIZE                SZ_128K
 102
 103 /* Physical Memory Map */
 104 #define CONFIG_NR_DRAM_BANKS            1
 105 #define PHYS_SDRAM                      MMDC0_ARB_BASE_ADDR
 106
 107 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM
 108 #define CONFIG_SYS_INIT_RAM_ADDR        IRAM_BASE_ADDR
 109 #define CONFIG_SYS_INIT_RAM_SIZE        IRAM_SIZE
 110
 111 #define CONFIG_SYS_INIT_SP_OFFSET \
 112         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 113 #define CONFIG_SYS_INIT_SP_ADDR \
 114         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 115
 116 /* MMC Configuration */
 117 #define CONFIG_SYS_FSL_ESDHC_ADDR       USDHC3_BASE_ADDR
 118
 119 /* I2C Configs */
 120 #define CONFIG_SYS_I2C
 121 #define CONFIG_SYS_I2C_MXC
 122 #define CONFIG_SYS_I2C_MXC_I2C1         /* enable I2C bus 1 */
 123 #define CONFIG_SYS_I2C_MXC_I2C2         /* enable I2C bus 2 */
 124 #define CONFIG_SYS_I2C_MXC_I2C3         /* enable I2C bus 3 */
 125 #define CONFIG_SYS_I2C_SPEED              100000
 126
 127 /* PMIC */
 128 #define CONFIG_POWER
 129 #define CONFIG_POWER_I2C
 130 #define CONFIG_POWER_PFUZE100
 131 #define CONFIG_POWER_PFUZE100_I2C_ADDR  0x08
 132
 133 /* NAND flash command */
 134 #define CONFIG_CMD_NAND
 135 #define CONFIG_CMD_NAND_TRIMFFS
 136
 137 /* NAND stuff */
 138 #define CONFIG_NAND_MXS
 139 #define CONFIG_SYS_MAX_NAND_DEVICE     1
 140 #define CONFIG_SYS_NAND_BASE           0x40000000
 141 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
 142 #define CONFIG_SYS_NAND_ONFI_DETECTION
 143
 144 /* DMA stuff, needed for GPMI/MXS NAND support */
 145 #define CONFIG_APBH_DMA
 146 #define CONFIG_APBH_DMA_BURST
 147 #define CONFIG_APBH_DMA_BURST8
 148
 149 /* Network */
 150
 151 #define CONFIG_FEC_MXC
 152 #define CONFIG_MII
 153
 154 #define IMX_FEC_BASE                    ENET2_BASE_ADDR
 155 #define CONFIG_FEC_MXC_PHYADDR          0x0
 156
 157 #define CONFIG_FEC_XCV_TYPE             RGMII
 158 #define CONFIG_ETHPRIME                 "FEC"
 159
 160 #define CONFIG_PHYLIB
 161 #define CONFIG_PHY_ATHEROS
 162
 163 #ifdef CONFIG_CMD_USB
 164 #define CONFIG_USB_EHCI
 165 #define CONFIG_USB_EHCI_MX6
 166 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 167 #define CONFIG_USB_HOST_ETHER
 168 #define CONFIG_USB_ETHER_ASIX
 169 #define CONFIG_MXC_USB_PORTSC  (PORT_PTS_UTMI | PORT_PTS_PTW)
 170 #define CONFIG_MXC_USB_FLAGS   0
 171 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
 172 #endif
 173
 174 #define CONFIG_IMX_THERMAL
 175
 176 #define CONFIG_FSL_QSPI
 177 #ifdef CONFIG_FSL_QSPI
 178 #define CONFIG_SYS_FSL_QSPI_AHB
 179 #define CONFIG_SF_DEFAULT_BUS           0
 180 #define CONFIG_SF_DEFAULT_CS            0
 181 #define CONFIG_SF_DEFAULT_SPEED 40000000
 182 #define CONFIG_SF_DEFAULT_MODE          SPI_MODE_0
 183 #define FSL_QSPI_FLASH_SIZE             SZ_32M
 184 #define FSL_QSPI_FLASH_NUM              2
 185 #endif
 186
 187 #define CONFIG_ENV_OFFSET               (8 * SZ_64K)
 188 #define CONFIG_ENV_SIZE                 SZ_8K
 189 #define CONFIG_ENV_IS_IN_MMC
 190
 191 #define CONFIG_SYS_FSL_USDHC_NUM        2
 192 #if defined(CONFIG_ENV_IS_IN_MMC)
 193 #define CONFIG_SYS_MMC_ENV_DEV          0  /*USDHC3*/
 194 #endif
 195
 196 #define CONFIG_PCA953X
 197 #define CONFIG_SYS_I2C_PCA953X_WIDTH    { {0x30, 8}, {0x32, 8}, {0x34, 8} }
 198
 199 #endif                          /* __CONFIG_H */