include/configs/mx6sabre_common.h

   1 /*
   2  * Copyright (C) 2012 Freescale Semiconductor, Inc.
   3  *
   4  * Configuration settings for the Freescale i.MX6Q SabreSD board.
   5  *
   6  * SPDX-License-Identifier:     GPL-2.0+
   7  */
   8
   9 #ifndef __MX6QSABRE_COMMON_CONFIG_H
  10 #define __MX6QSABRE_COMMON_CONFIG_H
  11
  12 #include "mx6_common.h"
  13
  14 #define CONFIG_IMX_THERMAL
  15
  16 /* Size of malloc() pool */
  17 #define CONFIG_SYS_MALLOC_LEN           (10 * SZ_1M)
  18
  19 #define CONFIG_BOARD_EARLY_INIT_F
  20 #define CONFIG_BOARD_LATE_INIT
  21
  22 #define CONFIG_MXC_UART
  23
  24 /* MMC Configs */
  25 #define CONFIG_SYS_FSL_ESDHC_ADDR      0
  26
  27 #define CONFIG_CMD_PING
  28 #define CONFIG_CMD_DHCP
  29 #define CONFIG_CMD_MII
  30 #define CONFIG_FEC_MXC
  31 #define CONFIG_MII
  32 #define IMX_FEC_BASE                    ENET_BASE_ADDR
  33 #define CONFIG_FEC_XCV_TYPE             RGMII
  34 #define CONFIG_ETHPRIME                 "FEC"
  35 #define CONFIG_FEC_MXC_PHYADDR          1
  36
  37 #define CONFIG_PHYLIB
  38 #define CONFIG_PHY_ATHEROS
  39
  40 #define CONFIG_CMD_SF
  41 #ifdef CONFIG_CMD_SF
  42 #define CONFIG_MXC_SPI
  43 #define CONFIG_SF_DEFAULT_BUS           0
  44 #define CONFIG_SF_DEFAULT_CS            0
  45 #define CONFIG_SF_DEFAULT_SPEED         20000000
  46 #define CONFIG_SF_DEFAULT_MODE          SPI_MODE_0
  47 #endif
  48
  49 /* Command definition */
  50 #define CONFIG_CMD_BMODE
  51
  52 #ifdef CONFIG_SUPPORT_EMMC_BOOT
  53 #define EMMC_ENV \
  54         "emmcdev=2\0" \
  55         "update_emmc_firmware=" \
  56                 "if test ${ip_dyn} = yes; then " \
  57                         "setenv get_cmd dhcp; " \
  58                 "else " \
  59                         "setenv get_cmd tftp; " \
  60                 "fi; " \
  61                 "if ${get_cmd} ${update_sd_firmware_filename}; then " \
  62                         "if mmc dev ${emmcdev} 1; then "        \
  63                                 "setexpr fw_sz ${filesize} / 0x200; " \
  64                                 "setexpr fw_sz ${fw_sz} + 1; "  \
  65                                 "mmc write ${loadaddr} 0x2 ${fw_sz}; " \
  66                         "fi; "  \
  67                 "fi\0"
  68 #else
  69 #define EMMC_ENV ""
  70 #endif
  71
  72 #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
  73
  74 #define CONFIG_EXTRA_ENV_SETTINGS \
  75         "script=boot.scr\0" \
  76         "image=zImage\0" \
  77         "fdt_file=undefined\0" \
  78         "fdt_addr=0x18000000\0" \
  79         "boot_fdt=try\0" \
  80         "ip_dyn=yes\0" \
  81         "console=" CONFIG_CONSOLE_DEV "\0" \
  82         "dfuspi=dfu 0 sf 0:0:10000000:0\0" \
  83         "dfu_alt_info_spl=spl raw 0x400\0" \
  84         "dfu_alt_info_img=u-boot raw 0x10000\0" \
  85         "dfu_alt_info=spl raw 0x400\0" \
  86         "fdt_high=0xffffffff\0"   \
  87         "initrd_high=0xffffffff\0" \
  88         "mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \
  89         "mmcpart=1\0" \
  90         "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
  91         "update_sd_firmware=" \
  92                 "if test ${ip_dyn} = yes; then " \
  93                         "setenv get_cmd dhcp; " \
  94                 "else " \
  95                         "setenv get_cmd tftp; " \
  96                 "fi; " \
  97                 "if mmc dev ${mmcdev}; then "   \
  98                         "if ${get_cmd} ${update_sd_firmware_filename}; then " \
  99                                 "setexpr fw_sz ${filesize} / 0x200; " \
 100                                 "setexpr fw_sz ${fw_sz} + 1; "  \
 101                                 "mmc write ${loadaddr} 0x2 ${fw_sz}; " \
 102                         "fi; "  \
 103                 "fi\0" \
 104         EMMC_ENV          \
 105         "mmcargs=setenv bootargs console=${console},${baudrate} " \
 106                 "root=${mmcroot}\0" \
 107         "loadbootscript=" \
 108                 "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
 109         "bootscript=echo Running bootscript from mmc ...; " \
 110                 "source\0" \
 111         "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
 112         "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
 113         "mmcboot=echo Booting from mmc ...; " \
 114                 "run mmcargs; " \
 115                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 116                         "if run loadfdt; then " \
 117                                 "bootz ${loadaddr} - ${fdt_addr}; " \
 118                         "else " \
 119                                 "if test ${boot_fdt} = try; then " \
 120                                         "bootz; " \
 121                                 "else " \
 122                                         "echo WARN: Cannot load the DT; " \
 123                                 "fi; " \
 124                         "fi; " \
 125                 "else " \
 126                         "bootz; " \
 127                 "fi;\0" \
 128         "netargs=setenv bootargs console=${console},${baudrate} " \
 129                 "root=/dev/nfs " \
 130                 "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
 131         "netboot=echo Booting from net ...; " \
 132                 "run netargs; " \
 133                 "if test ${ip_dyn} = yes; then " \
 134                         "setenv get_cmd dhcp; " \
 135                 "else " \
 136                         "setenv get_cmd tftp; " \
 137                 "fi; " \
 138                 "${get_cmd} ${image}; " \
 139                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 140                         "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
 141                                 "bootz ${loadaddr} - ${fdt_addr}; " \
 142                         "else " \
 143                                 "if test ${boot_fdt} = try; then " \
 144                                         "bootz; " \
 145                                 "else " \
 146                                         "echo WARN: Cannot load the DT; " \
 147                                 "fi; " \
 148                         "fi; " \
 149                 "else " \
 150                         "bootz; " \
 151                 "fi;\0" \
 152                 "findfdt="\
 153                         "if test $fdt_file = undefined; then " \
 154                                 "if test $board_name = SABREAUTO && test $board_rev = MX6QP; then " \
 155                                         "setenv fdt_file imx6qp-sabreauto.dtb; fi; " \
 156                                 "if test $board_name = SABREAUTO && test $board_rev = MX6Q; then " \
 157                                         "setenv fdt_file imx6q-sabreauto.dtb; fi; " \
 158                                 "if test $board_name = SABREAUTO && test $board_rev = MX6DL; then " \
 159                                         "setenv fdt_file imx6dl-sabreauto.dtb; fi; " \
 160                                 "if test $board_name = SABRESD && test $board_rev = MX6QP; then " \
 161                                         "setenv fdt_file imx6qp-sabresd.dtb; fi; " \
 162                                 "if test $board_name = SABRESD && test $board_rev = MX6Q; then " \
 163                                         "setenv fdt_file imx6q-sabresd.dtb; fi; " \
 164                                 "if test $board_name = SABRESD && test $board_rev = MX6DL; then " \
 165                                         "setenv fdt_file imx6dl-sabresd.dtb; fi; " \
 166                                 "if test $fdt_file = undefined; then " \
 167                                         "echo WARNING: Could not determine dtb to use; fi; " \
 168                         "fi;\0" \
 169
 170
 171 #define CONFIG_BOOTCOMMAND \
 172         "run findfdt;" \
 173         "mmc dev ${mmcdev};" \
 174         "if mmc rescan; then " \
 175                 "if run loadbootscript; then " \
 176                 "run bootscript; " \
 177                 "else " \
 178                         "if run loadimage; then " \
 179                                 "run mmcboot; " \
 180                         "else run netboot; " \
 181                         "fi; " \
 182                 "fi; " \
 183         "else run netboot; fi"
 184
 185 #define CONFIG_ARP_TIMEOUT     200UL
 186
 187 #define CONFIG_SYS_MEMTEST_START       0x10000000
 188 #define CONFIG_SYS_MEMTEST_END         0x10010000
 189 #define CONFIG_SYS_MEMTEST_SCRATCH     0x10800000
 190
 191 #define CONFIG_STACKSIZE               (128 * 1024)
 192
 193 /* Physical Memory Map */
 194 #define CONFIG_NR_DRAM_BANKS           1
 195 #define PHYS_SDRAM                     MMDC0_ARB_BASE_ADDR
 196
 197 #define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM
 198 #define CONFIG_SYS_INIT_RAM_ADDR       IRAM_BASE_ADDR
 199 #define CONFIG_SYS_INIT_RAM_SIZE       IRAM_SIZE
 200
 201 #define CONFIG_SYS_INIT_SP_OFFSET \
 202         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 203 #define CONFIG_SYS_INIT_SP_ADDR \
 204         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 205
 206 /* Environment organization */
 207 #define CONFIG_ENV_SIZE                 (8 * 1024)
 208
 209 #define CONFIG_ENV_IS_IN_MMC
 210
 211 #if defined(CONFIG_ENV_IS_IN_MMC)
 212 #define CONFIG_ENV_OFFSET               (8 * 64 * 1024)
 213 #endif
 214
 215 /* Framebuffer */
 216 #define CONFIG_VIDEO
 217 #define CONFIG_VIDEO_IPUV3
 218 #define CONFIG_CFB_CONSOLE
 219 #define CONFIG_VGA_AS_SINGLE_DEVICE
 220 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
 221 #define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
 222 #define CONFIG_VIDEO_BMP_RLE8
 223 #define CONFIG_SPLASH_SCREEN
 224 #define CONFIG_SPLASH_SCREEN_ALIGN
 225 #define CONFIG_BMP_16BPP
 226 #define CONFIG_VIDEO_LOGO
 227 #define CONFIG_VIDEO_BMP_LOGO
 228 #define CONFIG_IPUV3_CLK 260000000
 229 #define CONFIG_IMX_HDMI
 230 #define CONFIG_IMX_VIDEO_SKIP
 231
 232 #ifndef CONFIG_SPL
 233 #define CONFIG_CI_UDC
 234 #define CONFIG_USBD_HS
 235 #define CONFIG_USB_GADGET_DUALSPEED
 236
 237 #define CONFIG_USB_GADGET
 238 #define CONFIG_CMD_USB_MASS_STORAGE
 239 #define CONFIG_USB_FUNCTION_MASS_STORAGE
 240 #define CONFIG_USB_GADGET_DOWNLOAD
 241 #define CONFIG_USB_GADGET_VBUS_DRAW     2
 242
 243 #define CONFIG_G_DNL_VENDOR_NUM         0x0525
 244 #define CONFIG_G_DNL_PRODUCT_NUM        0xa4a5
 245 #define CONFIG_G_DNL_MANUFACTURER       "FSL"
 246
 247 #define CONFIG_USB_FUNCTION_FASTBOOT
 248 #define CONFIG_CMD_FASTBOOT
 249 #define CONFIG_ANDROID_BOOT_IMAGE
 250 #define CONFIG_FASTBOOT_BUF_ADDR   CONFIG_SYS_LOAD_ADDR
 251 #define CONFIG_FASTBOOT_BUF_SIZE   0x07000000
 252
 253 /* USB Device Firmware Update support */
 254 #define CONFIG_CMD_DFU
 255 #define CONFIG_USB_FUNCTION_DFU
 256 #define CONFIG_DFU_MMC
 257 #define CONFIG_DFU_SF
 258 #endif
 259
 260 #endif                         /* __MX6QSABRE_COMMON_CONFIG_H */