include/configs/mx6cuboxi.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright (C) 2015 Freescale Semiconductor, Inc.
   4  *
   5  * Configuration settings for the SolidRun mx6 based boards
   6  */
   7 #ifndef __MX6CUBOXI_CONFIG_H
   8 #define __MX6CUBOXI_CONFIG_H
   9
  10 #include "mx6_common.h"
  11
  12 #include "imx6_spl.h"
  13
  14 #define CONFIG_IMX_THERMAL
  15
  16 #define CONFIG_SYS_MALLOC_LEN           (10 * SZ_1M)
  17 #define CONFIG_MXC_UART
  18
  19 /* MMC Configs */
  20 #define CONFIG_SYS_FSL_ESDHC_ADDR       USDHC2_BASE_ADDR
  21
  22 /* SATA Configuration */
  23 #ifdef CONFIG_CMD_SATA
  24 #define CONFIG_SYS_SATA_MAX_DEVICE      1
  25 #define CONFIG_DWC_AHSATA_PORT_ID       0
  26 #define CONFIG_DWC_AHSATA_BASE_ADDR     SATA_ARB_BASE_ADDR
  27 #define CONFIG_LBA48
  28 #endif
  29
  30 /* Ethernet Configuration */
  31 #define CONFIG_FEC_MXC
  32 #define IMX_FEC_BASE                    ENET_BASE_ADDR
  33 #define CONFIG_FEC_XCV_TYPE             RGMII
  34 #define CONFIG_FEC_MXC_PHYADDR          0
  35 #define CONFIG_PHY_ATHEROS
  36
  37 /* Framebuffer */
  38 #define CONFIG_VIDEO_BMP_RLE8
  39 #define CONFIG_SPLASH_SCREEN
  40 #define CONFIG_SPLASH_SCREEN_ALIGN
  41 #define CONFIG_BMP_16BPP
  42 #define CONFIG_VIDEO_LOGO
  43 #define CONFIG_VIDEO_BMP_LOGO
  44 #define CONFIG_IMX_HDMI
  45 #define CONFIG_IMX_VIDEO_SKIP
  46
  47 /* USB */
  48 #define CONFIG_MXC_USB_PORTSC           (PORT_PTS_UTMI | PORT_PTS_PTW)
  49
  50 /* Command definition */
  51
  52 #define CONFIG_MXC_UART_BASE    UART1_BASE
  53 #define CONSOLE_DEV     "ttymxc0"
  54 #define CONFIG_SYS_MMC_ENV_DEV          0       /* SDHC2 */
  55
  56 #ifndef CONFIG_SPL_BUILD
  57 #define CONFIG_EXTRA_ENV_SETTINGS \
  58         "som_rev=undefined\0" \
  59         "has_emmc=undefined\0" \
  60         "fdtfile=undefined\0" \
  61         "fdt_addr_r=0x18000000\0" \
  62         "fdt_addr=0x18000000\0" \
  63         "kernel_addr_r=" __stringify(CONFIG_LOADADDR) "\0"  \
  64         "pxefile_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \
  65         "scriptaddr=" __stringify(CONFIG_LOADADDR) "\0" \
  66         "ramdisk_addr_r=0x13000000\0" \
  67         "ramdiskaddr=0x13000000\0" \
  68         "initrd_high=0xffffffff\0" \
  69         "ip_dyn=yes\0" \
  70         "console=" CONSOLE_DEV ",115200\0" \
  71         "bootm_size=0x10000000\0" \
  72         "mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \
  73         "finduuid=part uuid mmc 0:1 uuid\0" \
  74         "update_sd_firmware=" \
  75                 "if test ${ip_dyn} = yes; then " \
  76                         "setenv get_cmd dhcp; " \
  77                 "else " \
  78                         "setenv get_cmd tftp; " \
  79                 "fi; " \
  80                 "if mmc dev ${mmcdev}; then "   \
  81                         "if ${get_cmd} ${update_sd_firmware_filename}; then " \
  82                                 "setexpr fw_sz ${filesize} / 0x200; " \
  83                                 "setexpr fw_sz ${fw_sz} + 1; "  \
  84                                 "mmc write ${loadaddr} 0x2 ${fw_sz}; " \
  85                         "fi; "  \
  86                 "fi\0" \
  87         "findfdt="\
  88                 "if test ${board_rev} = MX6Q; then " \
  89                         "setenv fdtprefix imx6q; fi; " \
  90                 "if test ${board_rev} = MX6DL; then " \
  91                         "setenv fdtprefix imx6dl; fi; " \
  92                 "if test ${som_rev} = V15; then " \
  93                         "setenv fdtsuffix -som-v15; fi; " \
  94                 "if test ${has_emmc} = yes; then " \
  95                         "setenv emmcsuffix -emmc; fi; " \
  96                 "if test ${board_name} = HUMMINGBOARD2 ; then " \
  97                         "setenv fdtfile ${fdtprefix}-hummingboard2${emmcsuffix}${fdtsuffix}.dtb; fi; " \
  98                 "if test ${board_name} = HUMMINGBOARD ; then " \
  99                         "setenv fdtfile ${fdtprefix}-hummingboard${emmcsuffix}${fdtsuffix}.dtb; fi; " \
 100                 "if test ${board_name} = CUBOXI ; then " \
 101                         "setenv fdtfile ${fdtprefix}-cubox-i${emmcsuffix}${fdtsuffix}.dtb; fi; " \
 102                 "if test ${fdtfile} = undefined; then " \
 103                         "echo WARNING: Could not determine dtb to use; fi; \0" \
 104         BOOTENV
 105
 106 #define BOOT_TARGET_DEVICES(func) \
 107         func(MMC, mmc, 1) \
 108         func(MMC, mmc, 2) \
 109         func(SATA, sata, 0) \
 110         func(USB, usb, 0) \
 111         func(PXE, pxe, na) \
 112         func(DHCP, dhcp, na)
 113
 114 #include <config_distro_bootcmd.h>
 115
 116 #else
 117 #define CONFIG_EXTRA_ENV_SETTINGS
 118 #endif /* CONFIG_SPL_BUILD */
 119
 120 /* Physical Memory Map */
 121 #define CONFIG_SYS_SDRAM_BASE          MMDC0_ARB_BASE_ADDR
 122 #define CONFIG_SYS_INIT_RAM_ADDR       IRAM_BASE_ADDR
 123 #define CONFIG_SYS_INIT_RAM_SIZE       IRAM_SIZE
 124
 125 #define CONFIG_SYS_INIT_SP_OFFSET \
 126         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 127 #define CONFIG_SYS_INIT_SP_ADDR \
 128         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 129
 130 /* Environment organization */
 131
 132 #endif                         /* __MX6CUBOXI_CONFIG_H */