include/configs/mx53loco.h

   1 /*
   2  * Copyright (C) 2011 Freescale Semiconductor, Inc.
   3  * Jason Liu <r64343@freescale.com>
   4  *
   5  * Configuration settings for Freescale MX53 low cost board.
   6  *
   7  * SPDX-License-Identifier:     GPL-2.0+
   8  */
   9
  10 #ifndef __CONFIG_H
  11 #define __CONFIG_H
  12
  13 #define CONFIG_MACH_TYPE        MACH_TYPE_MX53_LOCO
  14
  15 #include <asm/arch/imx-regs.h>
  16
  17 #define CONFIG_CMDLINE_TAG
  18 #define CONFIG_SETUP_MEMORY_TAGS
  19 #define CONFIG_INITRD_TAG
  20
  21 #define CONFIG_SYS_FSL_CLK
  22
  23 /* Size of malloc() pool */
  24 #define CONFIG_SYS_MALLOC_LEN           (10 * 1024 * 1024)
  25
  26 #define CONFIG_MXC_GPIO
  27 #define CONFIG_REVISION_TAG
  28
  29 #define CONFIG_MXC_UART
  30 #define CONFIG_MXC_UART_BASE    UART1_BASE
  31
  32 /* MMC Configs */
  33 #define CONFIG_FSL_ESDHC
  34 #define CONFIG_SYS_FSL_ESDHC_ADDR       0
  35 #define CONFIG_SYS_FSL_ESDHC_NUM        2
  36
  37 /* Eth Configs */
  38 #define CONFIG_MII
  39
  40 #define CONFIG_FEC_MXC
  41 #define IMX_FEC_BASE    FEC_BASE_ADDR
  42 #define CONFIG_FEC_MXC_PHYADDR  0x1F
  43
  44 /* USB Configs */
  45 #define CONFIG_USB_EHCI_MX5
  46 #define CONFIG_USB_ETHER_ASIX
  47 #define CONFIG_USB_ETHER_MCS7830
  48 #define CONFIG_USB_ETHER_SMSC95XX
  49 #define CONFIG_MXC_USB_PORT     1
  50 #define CONFIG_MXC_USB_PORTSC   (PORT_PTS_UTMI | PORT_PTS_PTW)
  51 #define CONFIG_MXC_USB_FLAGS    0
  52
  53 /* I2C Configs */
  54 #define CONFIG_SYS_I2C
  55 #define CONFIG_SYS_I2C_MXC
  56 #define CONFIG_SYS_I2C_MXC_I2C1         /* enable I2C bus 1 */
  57 #define CONFIG_SYS_I2C_MXC_I2C2         /* enable I2C bus 2 */
  58 #define CONFIG_SYS_I2C_MXC_I2C3         /* enable I2C bus 3 */
  59
  60 /* PMIC Controller */
  61 #define CONFIG_POWER
  62 #define CONFIG_POWER_I2C
  63 #define CONFIG_DIALOG_POWER
  64 #define CONFIG_POWER_FSL
  65 #define CONFIG_POWER_FSL_MC13892
  66 #define CONFIG_SYS_DIALOG_PMIC_I2C_ADDR 0x48
  67 #define CONFIG_SYS_FSL_PMIC_I2C_ADDR    0x8
  68
  69 /* allow to overwrite serial and ethaddr */
  70 #define CONFIG_ENV_OVERWRITE
  71 #define CONFIG_CONS_INDEX               1
  72
  73 /* Command definition */
  74 #define CONFIG_SUPPORT_RAW_INITRD
  75
  76
  77 #define CONFIG_ETHPRIME         "FEC0"
  78
  79 #define CONFIG_LOADADDR         0x72000000      /* loadaddr env var */
  80 #define CONFIG_SYS_TEXT_BASE    0x77800000
  81
  82 #define CONFIG_EXTRA_ENV_SETTINGS \
  83         "script=boot.scr\0" \
  84         "image=zImage\0" \
  85         "fdt_addr=0x71000000\0" \
  86         "boot_fdt=try\0" \
  87         "ip_dyn=yes\0" \
  88         "mmcdev=0\0" \
  89         "mmcpart=1\0" \
  90         "mmcroot=/dev/mmcblk0p2 rw rootwait\0" \
  91         "mmcargs=setenv bootargs console=ttymxc0,${baudrate} root=${mmcroot}\0" \
  92         "loadbootscript=" \
  93                 "load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
  94         "bootscript=echo Running bootscript from mmc ...; " \
  95                 "source\0" \
  96         "loadimage=load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
  97         "loadfdt=load mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
  98         "mmcboot=echo Booting from mmc ...; " \
  99                 "run mmcargs; " \
 100                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 101                         "if run loadfdt; then " \
 102                                 "bootz ${loadaddr} - ${fdt_addr}; " \
 103                         "else " \
 104                                 "if test ${boot_fdt} = try; then " \
 105                                         "bootz; " \
 106                                 "else " \
 107                                         "echo WARN: Cannot load the DT; " \
 108                                 "fi; " \
 109                         "fi; " \
 110                 "else " \
 111                         "bootz; " \
 112                 "fi;\0" \
 113         "netargs=setenv bootargs console=ttymxc0,${baudrate} " \
 114                 "root=/dev/nfs " \
 115                 "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
 116         "netboot=echo Booting from net ...; " \
 117                 "run netargs; " \
 118                 "if test ${ip_dyn} = yes; then " \
 119                         "setenv get_cmd dhcp; " \
 120                 "else " \
 121                         "setenv get_cmd tftp; " \
 122                 "fi; " \
 123                 "${get_cmd} ${image}; " \
 124                 "if test ${boot_fdt} = yes ||  test ${boot_fdt} = try; then " \
 125                         "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
 126                                 "bootz ${loadaddr} - ${fdt_addr}; " \
 127                         "else " \
 128                                 "if test ${boot_fdt} = try; then " \
 129                                         "bootz; " \
 130                                 "else " \
 131                                         "echo ERROR: Cannot load the DT; " \
 132                                         "exit; " \
 133                                 "fi; " \
 134                         "fi; " \
 135                 "else " \
 136                         "bootz; " \
 137                 "fi;\0"
 138
 139 #define CONFIG_BOOTCOMMAND \
 140         "mmc dev ${mmcdev}; if mmc rescan; then " \
 141                 "if run loadbootscript; then " \
 142                         "run bootscript; " \
 143                 "else " \
 144                         "if run loadimage; then " \
 145                                 "run mmcboot; " \
 146                         "else run netboot; " \
 147                         "fi; " \
 148                 "fi; " \
 149         "else run netboot; fi"
 150
 151 #define CONFIG_ARP_TIMEOUT      200UL
 152
 153 /* Miscellaneous configurable options */
 154 #define CONFIG_SYS_LONGHELP             /* undef to save memory */
 155 #define CONFIG_AUTO_COMPLETE
 156 #define CONFIG_SYS_CBSIZE               512     /* Console I/O Buffer Size */
 157
 158 #define CONFIG_SYS_MEMTEST_START       0x70000000
 159 #define CONFIG_SYS_MEMTEST_END         0x70010000
 160
 161 #define CONFIG_SYS_LOAD_ADDR            CONFIG_LOADADDR
 162
 163 #define CONFIG_CMDLINE_EDITING
 164
 165 /* Physical Memory Map */
 166 #define CONFIG_NR_DRAM_BANKS    2
 167 #define PHYS_SDRAM_1                    CSD0_BASE_ADDR
 168 #define PHYS_SDRAM_1_SIZE               (gd->bd->bi_dram[0].size)
 169 #define PHYS_SDRAM_2                    CSD1_BASE_ADDR
 170 #define PHYS_SDRAM_2_SIZE               (gd->bd->bi_dram[1].size)
 171 #define PHYS_SDRAM_SIZE                 (gd->ram_size)
 172
 173 #define CONFIG_SYS_SDRAM_BASE           (PHYS_SDRAM_1)
 174 #define CONFIG_SYS_INIT_RAM_ADDR        (IRAM_BASE_ADDR)
 175 #define CONFIG_SYS_INIT_RAM_SIZE        (IRAM_SIZE)
 176
 177 #define CONFIG_SYS_INIT_SP_OFFSET \
 178         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 179 #define CONFIG_SYS_INIT_SP_ADDR \
 180         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 181
 182 /* environment organization */
 183 #define CONFIG_ENV_OFFSET      (6 * 64 * 1024)
 184 #define CONFIG_ENV_SIZE        (8 * 1024)
 185 #define CONFIG_SYS_MMC_ENV_DEV 0
 186
 187 #ifdef CONFIG_CMD_SATA
 188         #define CONFIG_DWC_AHSATA
 189         #define CONFIG_SYS_SATA_MAX_DEVICE      1
 190         #define CONFIG_DWC_AHSATA_PORT_ID       0
 191         #define CONFIG_DWC_AHSATA_BASE_ADDR     SATA_BASE_ADDR
 192         #define CONFIG_LBA48
 193         #define CONFIG_LIBATA
 194 #endif
 195
 196 /* Framebuffer and LCD */
 197 #define CONFIG_PREBOOT
 198 #define CONFIG_VIDEO_IPUV3
 199 #define CONFIG_VIDEO_BMP_RLE8
 200 #define CONFIG_SPLASH_SCREEN
 201 #define CONFIG_BMP_16BPP
 202 #define CONFIG_VIDEO_LOGO
 203 #define CONFIG_IPUV3_CLK        200000000
 204
 205 #endif                          /* __CONFIG_H */