include/configs/mx51evk.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright (C) 2007, Guennadi Liakhovetski <lg@denx.de>
   4  *
   5  * (C) Copyright 2009 Freescale Semiconductor, Inc.
   6  *
   7  * Configuration settings for the MX51EVK Board
   8  */
   9
  10 #ifndef __CONFIG_H
  11 #define __CONFIG_H
  12
  13  /* High Level Configuration Options */
  14
  15 #include <asm/arch/imx-regs.h>
  16
  17 /*
  18  * Hardware drivers
  19  */
  20 #define CONFIG_FSL_IIM
  21
  22 #define CONFIG_MXC_UART_BASE    UART1_BASE
  23
  24 /* PMIC Controller */
  25 #define CONFIG_POWER_SPI
  26 #define CONFIG_POWER_FSL
  27 #define CONFIG_FSL_PMIC_BUS     0
  28 #define CONFIG_FSL_PMIC_CS      0
  29 #define CONFIG_FSL_PMIC_CLK     2500000
  30 #define CONFIG_FSL_PMIC_MODE    (SPI_MODE_0 | SPI_CS_HIGH)
  31 #define CONFIG_FSL_PMIC_BITLEN  32
  32 #define CONFIG_RTC_MC13XXX
  33
  34 /*
  35  * MMC Configs
  36  * */
  37 #define CONFIG_SYS_FSL_ESDHC_ADDR       MMC_SDHC1_BASE_ADDR
  38 #define CONFIG_SYS_FSL_ESDHC_NUM        2
  39
  40 /* USB Configs */
  41 #define CONFIG_MXC_USB_PORT     1
  42 #define CONFIG_MXC_USB_PORTSC   PORT_PTS_ULPI
  43 #define CONFIG_MXC_USB_FLAGS    MXC_EHCI_POWER_PINS_ENABLED
  44
  45 /* Framebuffer and LCD */
  46
  47 #define CONFIG_EXTRA_ENV_SETTINGS \
  48         "script=boot.scr\0" \
  49         "image=zImage\0" \
  50         "fdt_file=imx51-babbage.dtb\0" \
  51         "fdt_addr=0x91000000\0" \
  52         "boot_fdt=try\0" \
  53         "ip_dyn=yes\0" \
  54         "mmcdev=0\0" \
  55         "mmcpart=1\0" \
  56         "mmcroot=/dev/mmcblk0p2 rootwait rw\0" \
  57         "mmcargs=setenv bootargs console=ttymxc0,${baudrate} " \
  58                 "root=${mmcroot}\0" \
  59         "loadbootscript=" \
  60                 "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
  61         "bootscript=echo Running bootscript from mmc ...; " \
  62                 "source\0" \
  63         "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
  64         "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
  65         "mmcboot=echo Booting from mmc ...; " \
  66                 "run mmcargs; " \
  67                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
  68                         "if run loadfdt; then " \
  69                                 "bootz ${loadaddr} - ${fdt_addr}; " \
  70                         "else " \
  71                                 "if test ${boot_fdt} = try; then " \
  72                                         "bootz; " \
  73                                 "else " \
  74                                         "echo WARN: Cannot load the DT; " \
  75                                 "fi; " \
  76                         "fi; " \
  77                 "else " \
  78                         "bootz; " \
  79                 "fi;\0" \
  80         "netargs=setenv bootargs console=ttymxc0,${baudrate} " \
  81                 "root=/dev/nfs " \
  82                 "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
  83         "netboot=echo Booting from net ...; " \
  84                 "run netargs; " \
  85                 "if test ${ip_dyn} = yes; then " \
  86                         "setenv get_cmd dhcp; " \
  87                 "else " \
  88                         "setenv get_cmd tftp; " \
  89                 "fi; " \
  90                 "${get_cmd} ${image}; " \
  91                 "if test ${boot_fdt} = yes ||  test ${boot_fdt} = try; then " \
  92                         "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
  93                                 "bootz ${loadaddr} - ${fdt_addr}; " \
  94                         "else " \
  95                                 "if test ${boot_fdt} = try; then " \
  96                                         "bootz; " \
  97                                 "else " \
  98                                         "echo ERROR: Cannot load the DT; " \
  99                                         "exit; " \
 100                                 "fi; " \
 101                         "fi; " \
 102                 "else " \
 103                         "bootz; " \
 104                 "fi;\0"
 105
 106 /*
 107  * Miscellaneous configurable options
 108  */
 109
 110 /*-----------------------------------------------------------------------
 111  * Physical Memory Map
 112  */
 113 #define PHYS_SDRAM_1            CSD0_BASE_ADDR
 114 #define PHYS_SDRAM_1_SIZE       (512 * 1024 * 1024)
 115
 116 #define CONFIG_SYS_SDRAM_BASE           (PHYS_SDRAM_1)
 117 #define CONFIG_SYS_INIT_RAM_ADDR        (IRAM_BASE_ADDR)
 118 #define CONFIG_SYS_INIT_RAM_SIZE        (IRAM_SIZE)
 119
 120 #define CONFIG_SYS_INIT_SP_OFFSET \
 121         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 122 #define CONFIG_SYS_INIT_SP_ADDR \
 123         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 124
 125 #define CONFIG_SYS_DDR_CLKSEL   0
 126 #define CONFIG_SYS_CLKTL_CBCDR  0x59E35100
 127 #define CONFIG_SYS_MAIN_PWR_ON
 128
 129 /*-----------------------------------------------------------------------
 130  * environment organization
 131  */
 132
 133 #endif