include/configs/mx51evk.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright (C) 2007, Guennadi Liakhovetski <lg@denx.de>
   4  *
   5  * (C) Copyright 2009 Freescale Semiconductor, Inc.
   6  *
   7  * Configuration settings for the MX51EVK Board
   8  */
   9
  10 #ifndef __CONFIG_H
  11 #define __CONFIG_H
  12
  13  /* High Level Configuration Options */
  14
  15 #define CONFIG_SYS_FSL_CLK
  16
  17 #include <asm/arch/imx-regs.h>
  18
  19 #define CONFIG_CMDLINE_TAG                      /* enable passing of ATAGs */
  20 #define CONFIG_SETUP_MEMORY_TAGS
  21 #define CONFIG_INITRD_TAG
  22 #define CONFIG_REVISION_TAG
  23
  24 #define CONFIG_MACH_TYPE        MACH_TYPE_MX51_BABBAGE
  25 /*
  26  * Size of malloc() pool
  27  */
  28 #define CONFIG_SYS_MALLOC_LEN           (10 * 1024 * 1024)
  29
  30 /*
  31  * Hardware drivers
  32  */
  33 #define CONFIG_FSL_IIM
  34
  35 #define CONFIG_MXC_UART_BASE    UART1_BASE
  36
  37 /* PMIC Controller */
  38 #define CONFIG_POWER
  39 #define CONFIG_POWER_SPI
  40 #define CONFIG_POWER_FSL
  41 #define CONFIG_FSL_PMIC_BUS     0
  42 #define CONFIG_FSL_PMIC_CS      0
  43 #define CONFIG_FSL_PMIC_CLK     2500000
  44 #define CONFIG_FSL_PMIC_MODE    (SPI_MODE_0 | SPI_CS_HIGH)
  45 #define CONFIG_FSL_PMIC_BITLEN  32
  46 #define CONFIG_RTC_MC13XXX
  47
  48 /*
  49  * MMC Configs
  50  * */
  51 #define CONFIG_SYS_FSL_ESDHC_ADDR       MMC_SDHC1_BASE_ADDR
  52 #define CONFIG_SYS_FSL_ESDHC_NUM        2
  53
  54 /*
  55  * Eth Configs
  56  */
  57
  58 #define CONFIG_FEC_MXC
  59 #define IMX_FEC_BASE    FEC_BASE_ADDR
  60 #define CONFIG_FEC_MXC_PHYADDR  0x1F
  61
  62 /* USB Configs */
  63 #define CONFIG_MXC_USB_PORT     1
  64 #define CONFIG_MXC_USB_PORTSC   PORT_PTS_ULPI
  65 #define CONFIG_MXC_USB_FLAGS    MXC_EHCI_POWER_PINS_ENABLED
  66
  67 /* Framebuffer and LCD */
  68 #define CONFIG_VIDEO_BMP_RLE8
  69 #define CONFIG_BMP_16BPP
  70 #define CONFIG_VIDEO_LOGO
  71
  72 #define CONFIG_ETHPRIME         "FEC0"
  73
  74 #define CONFIG_LOADADDR         0x92000000      /* loadaddr env var */
  75
  76 #define CONFIG_EXTRA_ENV_SETTINGS \
  77         "script=boot.scr\0" \
  78         "image=zImage\0" \
  79         "fdt_file=imx51-babbage.dtb\0" \
  80         "fdt_addr=0x91000000\0" \
  81         "boot_fdt=try\0" \
  82         "ip_dyn=yes\0" \
  83         "mmcdev=0\0" \
  84         "mmcpart=1\0" \
  85         "mmcroot=/dev/mmcblk0p2 rootwait rw\0" \
  86         "mmcargs=setenv bootargs console=ttymxc0,${baudrate} " \
  87                 "root=${mmcroot}\0" \
  88         "loadbootscript=" \
  89                 "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
  90         "bootscript=echo Running bootscript from mmc ...; " \
  91                 "source\0" \
  92         "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
  93         "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
  94         "mmcboot=echo Booting from mmc ...; " \
  95                 "run mmcargs; " \
  96                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
  97                         "if run loadfdt; then " \
  98                                 "bootz ${loadaddr} - ${fdt_addr}; " \
  99                         "else " \
 100                                 "if test ${boot_fdt} = try; then " \
 101                                         "bootz; " \
 102                                 "else " \
 103                                         "echo WARN: Cannot load the DT; " \
 104                                 "fi; " \
 105                         "fi; " \
 106                 "else " \
 107                         "bootz; " \
 108                 "fi;\0" \
 109         "netargs=setenv bootargs console=ttymxc0,${baudrate} " \
 110                 "root=/dev/nfs " \
 111                 "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
 112         "netboot=echo Booting from net ...; " \
 113                 "run netargs; " \
 114                 "if test ${ip_dyn} = yes; then " \
 115                         "setenv get_cmd dhcp; " \
 116                 "else " \
 117                         "setenv get_cmd tftp; " \
 118                 "fi; " \
 119                 "${get_cmd} ${image}; " \
 120                 "if test ${boot_fdt} = yes ||  test ${boot_fdt} = try; then " \
 121                         "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
 122                                 "bootz ${loadaddr} - ${fdt_addr}; " \
 123                         "else " \
 124                                 "if test ${boot_fdt} = try; then " \
 125                                         "bootz; " \
 126                                 "else " \
 127                                         "echo ERROR: Cannot load the DT; " \
 128                                         "exit; " \
 129                                 "fi; " \
 130                         "fi; " \
 131                 "else " \
 132                         "bootz; " \
 133                 "fi;\0"
 134
 135 #define CONFIG_BOOTCOMMAND \
 136         "mmc dev ${mmcdev}; if mmc rescan; then " \
 137                 "if run loadbootscript; then " \
 138                         "run bootscript; " \
 139                 "else " \
 140                         "if run loadimage; then " \
 141                                 "run mmcboot; " \
 142                         "else run netboot; " \
 143                         "fi; " \
 144                 "fi; " \
 145         "else run netboot; fi"
 146
 147 #define CONFIG_ARP_TIMEOUT      200UL
 148
 149 /*
 150  * Miscellaneous configurable options
 151  */
 152
 153 #define CONFIG_SYS_LOAD_ADDR            CONFIG_LOADADDR
 154
 155 /*-----------------------------------------------------------------------
 156  * Physical Memory Map
 157  */
 158 #define PHYS_SDRAM_1            CSD0_BASE_ADDR
 159 #define PHYS_SDRAM_1_SIZE       (512 * 1024 * 1024)
 160
 161 #define CONFIG_SYS_SDRAM_BASE           (PHYS_SDRAM_1)
 162 #define CONFIG_SYS_INIT_RAM_ADDR        (IRAM_BASE_ADDR)
 163 #define CONFIG_SYS_INIT_RAM_SIZE        (IRAM_SIZE)
 164
 165 #define CONFIG_SYS_INIT_SP_OFFSET \
 166         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 167 #define CONFIG_SYS_INIT_SP_ADDR \
 168         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 169
 170 #define CONFIG_SYS_DDR_CLKSEL   0
 171 #define CONFIG_SYS_CLKTL_CBCDR  0x59E35100
 172 #define CONFIG_SYS_MAIN_PWR_ON
 173
 174 /*-----------------------------------------------------------------------
 175  * environment organization
 176  */
 177
 178 /*
 179  * Environment starts at CONFIG_ENV_OFFSET=0xC0000 = 768k = 768 * 1024 = 786432
 180  *
 181  * Detect overlap between U-Boot image and environment area in build-time
 182  *
 183  * CONFIG_BOARD_SIZE_LIMIT = CONFIG_ENV_OFFSET - u-boot.imx offset
 184  * CONFIG_BOARD_SIZE_LIMIT = 768k - 1k = 767k = 785408
 185  *
 186  * Currently CONFIG_BOARD_SIZE_LIMIT does not handle expressions, so
 187  * write the direct value here
 188  */
 189 #define CONFIG_BOARD_SIZE_LIMIT         785408
 190
 191 #endif