include/configs/mx51evk.h

   1 /*
   2  * Copyright (C) 2007, Guennadi Liakhovetski <lg@denx.de>
   3  *
   4  * (C) Copyright 2009 Freescale Semiconductor, Inc.
   5  *
   6  * Configuration settings for the MX51EVK Board
   7  *
   8  * SPDX-License-Identifier:     GPL-2.0+
   9  */
  10
  11 #ifndef __CONFIG_H
  12 #define __CONFIG_H
  13
  14  /* High Level Configuration Options */
  15
  16 #define CONFIG_MX51     /* in a mx51 */
  17
  18 #define CONFIG_DISPLAY_CPUINFO
  19 #define CONFIG_DISPLAY_BOARDINFO
  20
  21 #define CONFIG_SYS_FSL_CLK
  22 #define CONFIG_SYS_TEXT_BASE    0x97800000
  23
  24 #include <asm/arch/imx-regs.h>
  25
  26 #define CONFIG_CMDLINE_TAG                      /* enable passing of ATAGs */
  27 #define CONFIG_SETUP_MEMORY_TAGS
  28 #define CONFIG_INITRD_TAG
  29 #define CONFIG_REVISION_TAG
  30
  31 #define CONFIG_MACH_TYPE        MACH_TYPE_MX51_BABBAGE
  32 /*
  33  * Size of malloc() pool
  34  */
  35 #define CONFIG_SYS_MALLOC_LEN           (10 * 1024 * 1024)
  36
  37 #define CONFIG_BOARD_LATE_INIT
  38
  39 /*
  40  * Hardware drivers
  41  */
  42 #define CONFIG_FSL_IIM
  43 #define CONFIG_CMD_FUSE
  44
  45 #define CONFIG_MXC_UART
  46 #define CONFIG_MXC_UART_BASE    UART1_BASE
  47 #define CONFIG_MXC_GPIO
  48
  49 /*
  50  * SPI Configs
  51  * */
  52 #define CONFIG_CMD_SPI
  53
  54 #define CONFIG_MXC_SPI
  55
  56 /* PMIC Controller */
  57 #define CONFIG_POWER
  58 #define CONFIG_POWER_SPI
  59 #define CONFIG_POWER_FSL
  60 #define CONFIG_FSL_PMIC_BUS     0
  61 #define CONFIG_FSL_PMIC_CS      0
  62 #define CONFIG_FSL_PMIC_CLK     2500000
  63 #define CONFIG_FSL_PMIC_MODE    (SPI_MODE_0 | SPI_CS_HIGH)
  64 #define CONFIG_FSL_PMIC_BITLEN  32
  65 #define CONFIG_RTC_MC13XXX
  66
  67 /*
  68  * MMC Configs
  69  * */
  70 #define CONFIG_FSL_ESDHC
  71 #define CONFIG_SYS_FSL_ESDHC_ADDR       MMC_SDHC1_BASE_ADDR
  72 #define CONFIG_SYS_FSL_ESDHC_NUM        2
  73
  74 #define CONFIG_MMC
  75
  76 #define CONFIG_CMD_MMC
  77 #define CONFIG_GENERIC_MMC
  78 #define CONFIG_CMD_FAT
  79 #define CONFIG_DOS_PARTITION
  80
  81 /*
  82  * Eth Configs
  83  */
  84 #define CONFIG_MII
  85
  86 #define CONFIG_FEC_MXC
  87 #define IMX_FEC_BASE    FEC_BASE_ADDR
  88 #define CONFIG_FEC_MXC_PHYADDR  0x1F
  89
  90 #define CONFIG_CMD_PING
  91 #define CONFIG_CMD_DHCP
  92 #define CONFIG_CMD_MII
  93
  94 /* USB Configs */
  95 #define CONFIG_CMD_USB
  96 #define CONFIG_CMD_FAT
  97 #define CONFIG_USB_EHCI
  98 #define CONFIG_USB_EHCI_MX5
  99 #define CONFIG_USB_STORAGE
 100 #define CONFIG_USB_HOST_ETHER
 101 #define CONFIG_USB_ETHER_ASIX
 102 #define CONFIG_USB_ETHER_SMSC95XX
 103 #define CONFIG_MXC_USB_PORT     1
 104 #define CONFIG_MXC_USB_PORTSC   PORT_PTS_ULPI
 105 #define CONFIG_MXC_USB_FLAGS    MXC_EHCI_POWER_PINS_ENABLED
 106
 107 /* Framebuffer and LCD */
 108 #define CONFIG_PREBOOT
 109 #define CONFIG_VIDEO
 110 #define CONFIG_VIDEO_IPUV3
 111 #define CONFIG_CFB_CONSOLE
 112 #define CONFIG_VGA_AS_SINGLE_DEVICE
 113 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
 114 #define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
 115 #define CONFIG_VIDEO_BMP_RLE8
 116 #define CONFIG_SPLASH_SCREEN
 117 #define CONFIG_BMP_16BPP
 118 #define CONFIG_VIDEO_LOGO
 119 #define CONFIG_IPUV3_CLK        133000000
 120
 121 /* allow to overwrite serial and ethaddr */
 122 #define CONFIG_ENV_OVERWRITE
 123 #define CONFIG_CONS_INDEX               1
 124 #define CONFIG_BAUDRATE                 115200
 125
 126 /***********************************************************
 127  * Command definition
 128  ***********************************************************/
 129 #define CONFIG_CMD_BOOTZ
 130
 131 #define CONFIG_CMD_DATE
 132
 133 #define CONFIG_BOOTDELAY        1
 134
 135 #define CONFIG_ETHPRIME         "FEC0"
 136
 137 #define CONFIG_LOADADDR         0x92000000      /* loadaddr env var */
 138
 139 #define CONFIG_EXTRA_ENV_SETTINGS \
 140         "script=boot.scr\0" \
 141         "image=zImage\0" \
 142         "fdt_file=imx51-babbage.dtb\0" \
 143         "fdt_addr=0x91000000\0" \
 144         "boot_fdt=try\0" \
 145         "ip_dyn=yes\0" \
 146         "mmcdev=0\0" \
 147         "mmcpart=1\0" \
 148         "mmcroot=/dev/mmcblk0p2 rootwait rw\0" \
 149         "mmcargs=setenv bootargs console=ttymxc0,${baudrate} " \
 150                 "root=${mmcroot}\0" \
 151         "loadbootscript=" \
 152                 "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
 153         "bootscript=echo Running bootscript from mmc ...; " \
 154                 "source\0" \
 155         "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
 156         "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
 157         "mmcboot=echo Booting from mmc ...; " \
 158                 "run mmcargs; " \
 159                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 160                         "if run loadfdt; then " \
 161                                 "bootz ${loadaddr} - ${fdt_addr}; " \
 162                         "else " \
 163                                 "if test ${boot_fdt} = try; then " \
 164                                         "bootz; " \
 165                                 "else " \
 166                                         "echo WARN: Cannot load the DT; " \
 167                                 "fi; " \
 168                         "fi; " \
 169                 "else " \
 170                         "bootz; " \
 171                 "fi;\0" \
 172         "netargs=setenv bootargs console=ttymxc0,${baudrate} " \
 173                 "root=/dev/nfs " \
 174                 "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
 175         "netboot=echo Booting from net ...; " \
 176                 "run netargs; " \
 177                 "if test ${ip_dyn} = yes; then " \
 178                         "setenv get_cmd dhcp; " \
 179                 "else " \
 180                         "setenv get_cmd tftp; " \
 181                 "fi; " \
 182                 "${get_cmd} ${image}; " \
 183                 "if test ${boot_fdt} = yes ||  test ${boot_fdt} = try; then " \
 184                         "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
 185                                 "bootz ${loadaddr} - ${fdt_addr}; " \
 186                         "else " \
 187                                 "if test ${boot_fdt} = try; then " \
 188                                         "bootz; " \
 189                                 "else " \
 190                                         "echo ERROR: Cannot load the DT; " \
 191                                         "exit; " \
 192                                 "fi; " \
 193                         "fi; " \
 194                 "else " \
 195                         "bootz; " \
 196                 "fi;\0"
 197
 198 #define CONFIG_BOOTCOMMAND \
 199         "mmc dev ${mmcdev}; if mmc rescan; then " \
 200                 "if run loadbootscript; then " \
 201                         "run bootscript; " \
 202                 "else " \
 203                         "if run loadimage; then " \
 204                                 "run mmcboot; " \
 205                         "else run netboot; " \
 206                         "fi; " \
 207                 "fi; " \
 208         "else run netboot; fi"
 209
 210 #define CONFIG_ARP_TIMEOUT      200UL
 211
 212 /*
 213  * Miscellaneous configurable options
 214  */
 215 #define CONFIG_SYS_LONGHELP             /* undef to save memory */
 216 #define CONFIG_AUTO_COMPLETE
 217 #define CONFIG_SYS_CBSIZE               256     /* Console I/O Buffer Size */
 218 #define CONFIG_SYS_MAXARGS      16      /* max number of command args */
 219 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
 220
 221 #define CONFIG_SYS_MEMTEST_START       0x90000000
 222 #define CONFIG_SYS_MEMTEST_END         0x90010000
 223
 224 #define CONFIG_SYS_LOAD_ADDR            CONFIG_LOADADDR
 225
 226 #define CONFIG_CMDLINE_EDITING
 227
 228 /*-----------------------------------------------------------------------
 229  * Physical Memory Map
 230  */
 231 #define CONFIG_NR_DRAM_BANKS    1
 232 #define PHYS_SDRAM_1            CSD0_BASE_ADDR
 233 #define PHYS_SDRAM_1_SIZE       (512 * 1024 * 1024)
 234
 235 #define CONFIG_SYS_SDRAM_BASE           (PHYS_SDRAM_1)
 236 #define CONFIG_SYS_INIT_RAM_ADDR        (IRAM_BASE_ADDR)
 237 #define CONFIG_SYS_INIT_RAM_SIZE        (IRAM_SIZE)
 238
 239 #define CONFIG_BOARD_EARLY_INIT_F
 240
 241 #define CONFIG_SYS_INIT_SP_OFFSET \
 242         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 243 #define CONFIG_SYS_INIT_SP_ADDR \
 244         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 245
 246 #define CONFIG_SYS_DDR_CLKSEL   0
 247 #define CONFIG_SYS_CLKTL_CBCDR  0x59E35100
 248 #define CONFIG_SYS_MAIN_PWR_ON
 249
 250 /*-----------------------------------------------------------------------
 251  * FLASH and environment organization
 252  */
 253 #define CONFIG_SYS_NO_FLASH
 254
 255 #define CONFIG_ENV_OFFSET      (6 * 64 * 1024)
 256 #define CONFIG_ENV_SIZE        (8 * 1024)
 257 #define CONFIG_ENV_IS_IN_MMC
 258 #define CONFIG_SYS_MMC_ENV_DEV 0
 259
 260 #endif