include/configs/mx51evk.h

   1 /*
   2  * Copyright (C) 2007, Guennadi Liakhovetski <lg@denx.de>
   3  *
   4  * (C) Copyright 2009 Freescale Semiconductor, Inc.
   5  *
   6  * Configuration settings for the MX51EVK Board
   7  *
   8  * SPDX-License-Identifier:     GPL-2.0+
   9  */
  10
  11 #ifndef __CONFIG_H
  12 #define __CONFIG_H
  13
  14  /* High Level Configuration Options */
  15
  16 #define CONFIG_SYS_FSL_CLK
  17 #define CONFIG_SYS_TEXT_BASE    0x97800000
  18
  19 #include <asm/arch/imx-regs.h>
  20
  21 #define CONFIG_CMDLINE_TAG                      /* enable passing of ATAGs */
  22 #define CONFIG_SETUP_MEMORY_TAGS
  23 #define CONFIG_INITRD_TAG
  24 #define CONFIG_REVISION_TAG
  25
  26 #define CONFIG_MACH_TYPE        MACH_TYPE_MX51_BABBAGE
  27 /*
  28  * Size of malloc() pool
  29  */
  30 #define CONFIG_SYS_MALLOC_LEN           (10 * 1024 * 1024)
  31
  32 /*
  33  * Hardware drivers
  34  */
  35 #define CONFIG_FSL_IIM
  36
  37 #define CONFIG_MXC_UART
  38 #define CONFIG_MXC_UART_BASE    UART1_BASE
  39 #define CONFIG_MXC_GPIO
  40
  41 /*
  42  * SPI Configs
  43  * */
  44
  45 #define CONFIG_MXC_SPI
  46
  47 /* PMIC Controller */
  48 #define CONFIG_POWER
  49 #define CONFIG_POWER_SPI
  50 #define CONFIG_POWER_FSL
  51 #define CONFIG_FSL_PMIC_BUS     0
  52 #define CONFIG_FSL_PMIC_CS      0
  53 #define CONFIG_FSL_PMIC_CLK     2500000
  54 #define CONFIG_FSL_PMIC_MODE    (SPI_MODE_0 | SPI_CS_HIGH)
  55 #define CONFIG_FSL_PMIC_BITLEN  32
  56 #define CONFIG_RTC_MC13XXX
  57
  58 /*
  59  * MMC Configs
  60  * */
  61 #define CONFIG_FSL_ESDHC
  62 #define CONFIG_SYS_FSL_ESDHC_ADDR       MMC_SDHC1_BASE_ADDR
  63 #define CONFIG_SYS_FSL_ESDHC_NUM        2
  64
  65 /*
  66  * Eth Configs
  67  */
  68 #define CONFIG_MII
  69
  70 #define CONFIG_FEC_MXC
  71 #define IMX_FEC_BASE    FEC_BASE_ADDR
  72 #define CONFIG_FEC_MXC_PHYADDR  0x1F
  73
  74 /* USB Configs */
  75 #define CONFIG_USB_EHCI_MX5
  76 #define CONFIG_USB_ETHER_ASIX
  77 #define CONFIG_USB_ETHER_SMSC95XX
  78 #define CONFIG_MXC_USB_PORT     1
  79 #define CONFIG_MXC_USB_PORTSC   PORT_PTS_ULPI
  80 #define CONFIG_MXC_USB_FLAGS    MXC_EHCI_POWER_PINS_ENABLED
  81
  82 /* Framebuffer and LCD */
  83 #define CONFIG_PREBOOT
  84 #define CONFIG_VIDEO_IPUV3
  85 #define CONFIG_VIDEO_BMP_RLE8
  86 #define CONFIG_SPLASH_SCREEN
  87 #define CONFIG_BMP_16BPP
  88 #define CONFIG_VIDEO_LOGO
  89 #define CONFIG_IPUV3_CLK        133000000
  90
  91 /* allow to overwrite serial and ethaddr */
  92 #define CONFIG_ENV_OVERWRITE
  93 #define CONFIG_CONS_INDEX               1
  94
  95 #define CONFIG_ETHPRIME         "FEC0"
  96
  97 #define CONFIG_LOADADDR         0x92000000      /* loadaddr env var */
  98
  99 #define CONFIG_EXTRA_ENV_SETTINGS \
 100         "script=boot.scr\0" \
 101         "image=zImage\0" \
 102         "fdt_file=imx51-babbage.dtb\0" \
 103         "fdt_addr=0x91000000\0" \
 104         "boot_fdt=try\0" \
 105         "ip_dyn=yes\0" \
 106         "mmcdev=0\0" \
 107         "mmcpart=1\0" \
 108         "mmcroot=/dev/mmcblk0p2 rootwait rw\0" \
 109         "mmcargs=setenv bootargs console=ttymxc0,${baudrate} " \
 110                 "root=${mmcroot}\0" \
 111         "loadbootscript=" \
 112                 "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
 113         "bootscript=echo Running bootscript from mmc ...; " \
 114                 "source\0" \
 115         "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
 116         "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
 117         "mmcboot=echo Booting from mmc ...; " \
 118                 "run mmcargs; " \
 119                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 120                         "if run loadfdt; then " \
 121                                 "bootz ${loadaddr} - ${fdt_addr}; " \
 122                         "else " \
 123                                 "if test ${boot_fdt} = try; then " \
 124                                         "bootz; " \
 125                                 "else " \
 126                                         "echo WARN: Cannot load the DT; " \
 127                                 "fi; " \
 128                         "fi; " \
 129                 "else " \
 130                         "bootz; " \
 131                 "fi;\0" \
 132         "netargs=setenv bootargs console=ttymxc0,${baudrate} " \
 133                 "root=/dev/nfs " \
 134                 "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
 135         "netboot=echo Booting from net ...; " \
 136                 "run netargs; " \
 137                 "if test ${ip_dyn} = yes; then " \
 138                         "setenv get_cmd dhcp; " \
 139                 "else " \
 140                         "setenv get_cmd tftp; " \
 141                 "fi; " \
 142                 "${get_cmd} ${image}; " \
 143                 "if test ${boot_fdt} = yes ||  test ${boot_fdt} = try; then " \
 144                         "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
 145                                 "bootz ${loadaddr} - ${fdt_addr}; " \
 146                         "else " \
 147                                 "if test ${boot_fdt} = try; then " \
 148                                         "bootz; " \
 149                                 "else " \
 150                                         "echo ERROR: Cannot load the DT; " \
 151                                         "exit; " \
 152                                 "fi; " \
 153                         "fi; " \
 154                 "else " \
 155                         "bootz; " \
 156                 "fi;\0"
 157
 158 #define CONFIG_BOOTCOMMAND \
 159         "mmc dev ${mmcdev}; if mmc rescan; then " \
 160                 "if run loadbootscript; then " \
 161                         "run bootscript; " \
 162                 "else " \
 163                         "if run loadimage; then " \
 164                                 "run mmcboot; " \
 165                         "else run netboot; " \
 166                         "fi; " \
 167                 "fi; " \
 168         "else run netboot; fi"
 169
 170 #define CONFIG_ARP_TIMEOUT      200UL
 171
 172 /*
 173  * Miscellaneous configurable options
 174  */
 175 #define CONFIG_SYS_LONGHELP             /* undef to save memory */
 176 #define CONFIG_AUTO_COMPLETE
 177
 178 #define CONFIG_SYS_MEMTEST_START       0x90000000
 179 #define CONFIG_SYS_MEMTEST_END         0x90010000
 180
 181 #define CONFIG_SYS_LOAD_ADDR            CONFIG_LOADADDR
 182
 183 #define CONFIG_CMDLINE_EDITING
 184
 185 /*-----------------------------------------------------------------------
 186  * Physical Memory Map
 187  */
 188 #define CONFIG_NR_DRAM_BANKS    1
 189 #define PHYS_SDRAM_1            CSD0_BASE_ADDR
 190 #define PHYS_SDRAM_1_SIZE       (512 * 1024 * 1024)
 191
 192 #define CONFIG_SYS_SDRAM_BASE           (PHYS_SDRAM_1)
 193 #define CONFIG_SYS_INIT_RAM_ADDR        (IRAM_BASE_ADDR)
 194 #define CONFIG_SYS_INIT_RAM_SIZE        (IRAM_SIZE)
 195
 196 #define CONFIG_SYS_INIT_SP_OFFSET \
 197         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 198 #define CONFIG_SYS_INIT_SP_ADDR \
 199         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 200
 201 #define CONFIG_SYS_DDR_CLKSEL   0
 202 #define CONFIG_SYS_CLKTL_CBCDR  0x59E35100
 203 #define CONFIG_SYS_MAIN_PWR_ON
 204
 205 /*-----------------------------------------------------------------------
 206  * environment organization
 207  */
 208 #define CONFIG_ENV_OFFSET      (6 * 64 * 1024)
 209 #define CONFIG_ENV_SIZE        (8 * 1024)
 210 #define CONFIG_SYS_MMC_ENV_DEV 0
 211
 212 #endif