include/configs/mx31pdk.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * (C) Copyright 2008 Magnus Lilja <lilja.magnus@gmail.com>
   4  *
   5  * (C) Copyright 2004
   6  * Texas Instruments.
   7  * Richard Woodruff <r-woodruff2@ti.com>
   8  * Kshitij Gupta <kshitij@ti.com>
   9  *
  10  * Configuration settings for the Freescale i.MX31 PDK board.
  11  */
  12
  13 #ifndef __CONFIG_H
  14 #define __CONFIG_H
  15
  16 #include <asm/arch/imx-regs.h>
  17
  18 /* High Level Configuration Options */
  19 #define CONFIG_CMDLINE_TAG                      /* enable passing of ATAGs */
  20 #define CONFIG_SETUP_MEMORY_TAGS
  21 #define CONFIG_INITRD_TAG
  22
  23 #define CONFIG_MACH_TYPE        MACH_TYPE_MX31_3DS
  24
  25 #define CONFIG_SPL_TARGET       "u-boot-with-spl.bin"
  26 #define CONFIG_SPL_MAX_SIZE     2048
  27
  28 #define CONFIG_SPL_TEXT_BASE    0x87dc0000
  29
  30 #ifndef CONFIG_SPL_BUILD
  31 #define CONFIG_SKIP_LOWLEVEL_INIT
  32 #endif
  33
  34 /*
  35  * Size of malloc() pool
  36  */
  37 #define CONFIG_SYS_MALLOC_LEN           (2*CONFIG_ENV_SIZE + 2 * 128 * 1024)
  38
  39 /*
  40  * Hardware drivers
  41  */
  42
  43 #define CONFIG_MXC_UART
  44 #define CONFIG_MXC_UART_BASE    UART1_BASE
  45
  46 /* PMIC Controller */
  47 #define CONFIG_POWER
  48 #define CONFIG_POWER_SPI
  49 #define CONFIG_POWER_FSL
  50 #define CONFIG_FSL_PMIC_BUS     1
  51 #define CONFIG_FSL_PMIC_CS      2
  52 #define CONFIG_FSL_PMIC_CLK     1000000
  53 #define CONFIG_FSL_PMIC_MODE    (SPI_MODE_0 | SPI_CS_HIGH)
  54 #define CONFIG_FSL_PMIC_BITLEN  32
  55 #define CONFIG_RTC_MC13XXX
  56
  57 /* allow to overwrite serial and ethaddr */
  58 #define CONFIG_ENV_OVERWRITE
  59
  60 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
  61         "bootargs_base=setenv bootargs console=ttymxc0,115200\0"        \
  62         "bootargs_nfs=setenv bootargs $(bootargs) root=/dev/nfs "       \
  63                 "ip=dhcp nfsroot=$(serverip):$(nfsrootfs),v3,tcp\0"     \
  64         "bootcmd=run bootcmd_net\0"                                     \
  65         "bootcmd_net=run bootargs_base bootargs_mtd bootargs_nfs; "     \
  66                 "tftpboot 0x81000000 uImage-mx31; bootm\0"              \
  67         "prg_uboot=tftpboot 0x81000000 u-boot-with-spl.bin; "           \
  68                 "nand erase 0x0 0x40000; "                              \
  69                 "nand write 0x81000000 0x0 0x40000\0"
  70
  71 /*
  72  * Miscellaneous configurable options
  73  */
  74
  75 /* memtest works on */
  76 #define CONFIG_SYS_MEMTEST_START        0x80000000
  77 #define CONFIG_SYS_MEMTEST_END          0x80010000
  78
  79 /* default load address */
  80 #define CONFIG_SYS_LOAD_ADDR            0x81000000
  81
  82 /*-----------------------------------------------------------------------
  83  * Physical Memory Map
  84  */
  85 #define PHYS_SDRAM_1            CSD0_BASE
  86 #define PHYS_SDRAM_1_SIZE       (128 * 1024 * 1024)
  87
  88 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM_1
  89 #define CONFIG_SYS_INIT_RAM_ADDR        IRAM_BASE_ADDR
  90 #define CONFIG_SYS_INIT_RAM_SIZE        IRAM_SIZE
  91 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - \
  92                                                 GENERATED_GBL_DATA_SIZE)
  93 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \
  94                                                 CONFIG_SYS_INIT_RAM_SIZE)
  95
  96 /*
  97  * environment organization
  98  */
  99 #define CONFIG_ENV_OFFSET               0x40000
 100 #define CONFIG_ENV_OFFSET_REDUND        0x60000
 101 #define CONFIG_ENV_SIZE                 (128 * 1024)
 102
 103 /*
 104  * NAND driver
 105  */
 106 #define CONFIG_MXC_NAND_REGS_BASE      NFC_BASE_ADDR
 107 #define CONFIG_SYS_MAX_NAND_DEVICE     1
 108 #define CONFIG_SYS_NAND_BASE           NFC_BASE_ADDR
 109 #define CONFIG_MXC_NAND_HWECC
 110 #define CONFIG_SYS_NAND_LARGEPAGE
 111
 112 /* NAND configuration for the NAND_SPL */
 113
 114 /* Start copying real U-Boot from the second page */
 115 #define CONFIG_SYS_NAND_U_BOOT_OFFS     CONFIG_SPL_PAD_TO
 116 #define CONFIG_SYS_NAND_U_BOOT_SIZE     0x3f800
 117 /* Load U-Boot to this address */
 118 #define CONFIG_SYS_NAND_U_BOOT_DST      CONFIG_SYS_TEXT_BASE
 119 #define CONFIG_SYS_NAND_U_BOOT_START    CONFIG_SYS_NAND_U_BOOT_DST
 120
 121 #define CONFIG_SYS_NAND_PAGE_SIZE       0x800
 122 #define CONFIG_SYS_NAND_BLOCK_SIZE      (128 * 1024)
 123 #define CONFIG_SYS_NAND_PAGE_COUNT      64
 124 #define CONFIG_SYS_NAND_SIZE            (256 * 1024 * 1024)
 125 #define CONFIG_SYS_NAND_BAD_BLOCK_POS   0
 126
 127 /* Configuration of lowlevel_init.S (clocks and SDRAM) */
 128 #define CCM_CCMR_SETUP          0x074B0BF5
 129 #define CCM_PDR0_SETUP_532MHZ   (PDR0_CSI_PODF(0x3f) | PDR0_CSI_PRDF(7) | \
 130                                  PDR0_PER_PODF(7) | PDR0_HSP_PODF(3) |    \
 131                                  PDR0_NFC_PODF(5) | PDR0_IPG_PODF(1) |    \
 132                                  PDR0_MAX_PODF(3) | PDR0_MCU_PODF(0))
 133 #define CCM_MPCTL_SETUP_532MHZ  (PLL_PD(0) | PLL_MFD(51) | PLL_MFI(10) |  \
 134                                  PLL_MFN(12))
 135
 136 #define ESDMISC_MDDR_SETUP      0x00000004
 137 #define ESDMISC_MDDR_RESET_DL   0x0000000c
 138 #define ESDCFG0_MDDR_SETUP      0x006ac73a
 139
 140 #define ESDCTL_ROW_COL          (ESDCTL_SDE | ESDCTL_ROW(2) | ESDCTL_COL(2))
 141 #define ESDCTL_SETTINGS         (ESDCTL_ROW_COL | ESDCTL_SREFR(3) | \
 142                                  ESDCTL_DSIZ(2) | ESDCTL_BL(1))
 143 #define ESDCTL_PRECHARGE        (ESDCTL_ROW_COL | ESDCTL_CMD_PRECHARGE)
 144 #define ESDCTL_AUTOREFRESH      (ESDCTL_ROW_COL | ESDCTL_CMD_AUTOREFRESH)
 145 #define ESDCTL_LOADMODEREG      (ESDCTL_ROW_COL | ESDCTL_CMD_LOADMODEREG)
 146 #define ESDCTL_RW               ESDCTL_SETTINGS
 147
 148 #endif /* __CONFIG_H */