include/configs/mx23_olinuxino.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright (C) 2013 Marek Vasut <marex@denx.de>
   4  */
   5 #ifndef __CONFIGS_MX23_OLINUXINO_H__
   6 #define __CONFIGS_MX23_OLINUXINO_H__
   7
   8 /* System configurations */
   9 #define CONFIG_MACH_TYPE        4105
  10
  11 /* U-Boot Commands */
  12
  13 /* Memory configuration */
  14 #define CONFIG_NR_DRAM_BANKS            1               /* 1 bank of DRAM */
  15 #define PHYS_SDRAM_1                    0x40000000      /* Base address */
  16 #define PHYS_SDRAM_1_SIZE               0x08000000      /* Max 128 MB RAM */
  17 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM_1
  18
  19 /* Environment */
  20 #define CONFIG_ENV_OVERWRITE
  21
  22 /* Environment is in MMC */
  23 #if defined(CONFIG_CMD_MMC) && defined(CONFIG_ENV_IS_IN_MMC)
  24 #define CONFIG_ENV_OFFSET       (256 * 1024)
  25 #define CONFIG_ENV_SIZE         (16 * 1024)
  26 #define CONFIG_SYS_MMC_ENV_DEV  0
  27 #endif
  28
  29 /* Status LED */
  30
  31 /* USB */
  32 #ifdef CONFIG_CMD_USB
  33 #define CONFIG_EHCI_MXS_PORT0
  34 #define CONFIG_USB_MAX_CONTROLLER_COUNT 1
  35 #endif
  36
  37 /* Ethernet */
  38
  39 /* Booting Linux */
  40 #define CONFIG_BOOTFILE         "uImage"
  41 #define CONFIG_LOADADDR         0x42000000
  42 #define CONFIG_SYS_LOAD_ADDR    CONFIG_LOADADDR
  43
  44 /* Extra Environment */
  45 #define CONFIG_EXTRA_ENV_SETTINGS \
  46         "update_sd_firmware_filename=u-boot.sd\0" \
  47         "update_sd_firmware="           /* Update the SD firmware partition */ \
  48                 "if mmc rescan ; then " \
  49                 "if tftp ${update_sd_firmware_filename} ; then " \
  50                 "setexpr fw_sz ${filesize} / 0x200 ; "  /* SD block size */ \
  51                 "setexpr fw_sz ${fw_sz} + 1 ; " \
  52                 "mmc write ${loadaddr} 0x800 ${fw_sz} ; " \
  53                 "fi ; " \
  54                 "fi\0" \
  55         "script=boot.scr\0"     \
  56         "uimage=uImage\0" \
  57         "console=ttyAMA0\0" \
  58         "fdt_file=imx23-olinuxino.dtb\0" \
  59         "fdt_addr=0x41000000\0" \
  60         "boot_fdt=try\0" \
  61         "ip_dyn=yes\0" \
  62         "mmcdev=0\0" \
  63         "mmcpart=2\0" \
  64         "mmcroot=/dev/mmcblk0p3 rw rootwait\0" \
  65         "mmcargs=setenv bootargs console=${console},${baudrate} " \
  66                 "root=${mmcroot}\0" \
  67         "loadbootscript="  \
  68                 "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
  69         "bootscript=echo Running bootscript from mmc ...; "     \
  70                 "source\0" \
  71         "loaduimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${uimage}\0" \
  72         "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
  73         "mmcboot=echo Booting from mmc ...; " \
  74                 "run mmcargs; " \
  75                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
  76                         "if run loadfdt; then " \
  77                                 "bootm ${loadaddr} - ${fdt_addr}; " \
  78                         "else " \
  79                                 "if test ${boot_fdt} = try; then " \
  80                                         "bootm; " \
  81                                 "else " \
  82                                         "echo WARN: Cannot load the DT; " \
  83                                 "fi; " \
  84                         "fi; " \
  85                 "else " \
  86                         "bootm; " \
  87                 "fi;\0" \
  88         "netargs=setenv bootargs console=${console},${baudrate} " \
  89                 "root=/dev/nfs " \
  90                 "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
  91         "netboot=echo Booting from net ...; " \
  92                 "usb start; " \
  93                 "run netargs; " \
  94                 "if test ${ip_dyn} = yes; then " \
  95                         "setenv get_cmd dhcp; " \
  96                 "else " \
  97                         "setenv get_cmd tftp; " \
  98                 "fi; " \
  99                 "${get_cmd} ${uimage}; " \
 100                 "if test ${boot_fdt} = yes; then " \
 101                         "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
 102                                 "bootm ${loadaddr} - ${fdt_addr}; " \
 103                         "else " \
 104                                 "if test ${boot_fdt} = try; then " \
 105                                         "bootm; " \
 106                                 "else " \
 107                                         "echo WARN: Cannot load the DT; " \
 108                                 "fi;" \
 109                         "fi; " \
 110                 "else " \
 111                         "bootm; " \
 112                 "fi;\0"
 113
 114 #define CONFIG_BOOTCOMMAND \
 115         "mmc dev ${mmcdev}; if mmc rescan; then " \
 116                 "if run loadbootscript; then " \
 117                         "run bootscript; " \
 118                 "else " \
 119                         "if run loaduimage; then " \
 120                                 "run mmcboot; " \
 121                         "else run netboot; " \
 122                         "fi; " \
 123                 "fi; " \
 124         "else run netboot; fi"
 125
 126 /* The rest of the configuration is shared */
 127 #include <configs/mxs.h>
 128
 129 #endif /* __CONFIGS_MX23_OLINUXINO_H__ */