Merge branch '2021-08-31-kconfig-migrations-part2' into next
[platform/kernel/u-boot.git] / include / configs / mx23_olinuxino.h
1 /* SPDX-License-Identifier: GPL-2.0+ */
2 /*
3  * Copyright (C) 2013 Marek Vasut <marex@denx.de>
4  */
5 #ifndef __CONFIGS_MX23_OLINUXINO_H__
6 #define __CONFIGS_MX23_OLINUXINO_H__
7
8 /* System configurations */
9 #define CONFIG_MACH_TYPE        4105
10
11 /* U-Boot Commands */
12
13 /* Memory configuration */
14 #define PHYS_SDRAM_1                    0x40000000      /* Base address */
15 #define PHYS_SDRAM_1_SIZE               0x08000000      /* Max 128 MB RAM */
16 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM_1
17
18 /* Status LED */
19
20 /* USB */
21 #ifdef CONFIG_CMD_USB
22 #define CONFIG_EHCI_MXS_PORT0
23 #define CONFIG_USB_MAX_CONTROLLER_COUNT 1
24 #endif
25
26 /* Ethernet */
27
28 /* Booting Linux */
29 #define CONFIG_BOOTFILE         "uImage"
30
31 /* Extra Environment */
32 #define CONFIG_EXTRA_ENV_SETTINGS \
33         "update_sd_firmware_filename=u-boot.sd\0" \
34         "update_sd_firmware="           /* Update the SD firmware partition */ \
35                 "if mmc rescan ; then " \
36                 "if tftp ${update_sd_firmware_filename} ; then " \
37                 "setexpr fw_sz ${filesize} / 0x200 ; "  /* SD block size */ \
38                 "setexpr fw_sz ${fw_sz} + 1 ; " \
39                 "mmc write ${loadaddr} 0x800 ${fw_sz} ; " \
40                 "fi ; " \
41                 "fi\0" \
42         "script=boot.scr\0"     \
43         "uimage=uImage\0" \
44         "console=ttyAMA0\0" \
45         "fdt_file=imx23-olinuxino.dtb\0" \
46         "fdt_addr=0x41000000\0" \
47         "boot_fdt=try\0" \
48         "ip_dyn=yes\0" \
49         "mmcdev=0\0" \
50         "mmcpart=2\0" \
51         "mmcroot=/dev/mmcblk0p3 rw rootwait\0" \
52         "mmcargs=setenv bootargs console=${console},${baudrate} " \
53                 "root=${mmcroot}\0" \
54         "loadbootscript="  \
55                 "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
56         "bootscript=echo Running bootscript from mmc ...; "     \
57                 "source\0" \
58         "loaduimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${uimage}\0" \
59         "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
60         "mmcboot=echo Booting from mmc ...; " \
61                 "run mmcargs; " \
62                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
63                         "if run loadfdt; then " \
64                                 "bootm ${loadaddr} - ${fdt_addr}; " \
65                         "else " \
66                                 "if test ${boot_fdt} = try; then " \
67                                         "bootm; " \
68                                 "else " \
69                                         "echo WARN: Cannot load the DT; " \
70                                 "fi; " \
71                         "fi; " \
72                 "else " \
73                         "bootm; " \
74                 "fi;\0" \
75         "netargs=setenv bootargs console=${console},${baudrate} " \
76                 "root=/dev/nfs " \
77                 "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
78         "netboot=echo Booting from net ...; " \
79                 "usb start; " \
80                 "run netargs; " \
81                 "if test ${ip_dyn} = yes; then " \
82                         "setenv get_cmd dhcp; " \
83                 "else " \
84                         "setenv get_cmd tftp; " \
85                 "fi; " \
86                 "${get_cmd} ${uimage}; " \
87                 "if test ${boot_fdt} = yes; then " \
88                         "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
89                                 "bootm ${loadaddr} - ${fdt_addr}; " \
90                         "else " \
91                                 "if test ${boot_fdt} = try; then " \
92                                         "bootm; " \
93                                 "else " \
94                                         "echo WARN: Cannot load the DT; " \
95                                 "fi;" \
96                         "fi; " \
97                 "else " \
98                         "bootm; " \
99                 "fi;\0"
100
101 #define CONFIG_BOOTCOMMAND \
102         "mmc dev ${mmcdev}; if mmc rescan; then " \
103                 "if run loadbootscript; then " \
104                         "run bootscript; " \
105                 "else " \
106                         "if run loaduimage; then " \
107                                 "run mmcboot; " \
108                         "else run netboot; " \
109                         "fi; " \
110                 "fi; " \
111         "else run netboot; fi"
112
113 /* The rest of the configuration is shared */
114 #include <configs/mxs.h>
115
116 #endif /* __CONFIGS_MX23_OLINUXINO_H__ */