include/configs/mx23_olinuxino.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright (C) 2013 Marek Vasut <marex@denx.de>
   4  */
   5 #ifndef __CONFIGS_MX23_OLINUXINO_H__
   6 #define __CONFIGS_MX23_OLINUXINO_H__
   7
   8 /* System configurations */
   9 #define CONFIG_MACH_TYPE        4105
  10
  11 /* U-Boot Commands */
  12
  13 /* Memory configuration */
  14 #define PHYS_SDRAM_1                    0x40000000      /* Base address */
  15 #define PHYS_SDRAM_1_SIZE               0x08000000      /* Max 128 MB RAM */
  16 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM_1
  17
  18 /* Environment */
  19
  20 /* Environment is in MMC */
  21 #if defined(CONFIG_CMD_MMC) && defined(CONFIG_ENV_IS_IN_MMC)
  22 #define CONFIG_SYS_MMC_ENV_DEV  0
  23 #endif
  24
  25 /* Status LED */
  26
  27 /* USB */
  28 #ifdef CONFIG_CMD_USB
  29 #define CONFIG_EHCI_MXS_PORT0
  30 #define CONFIG_USB_MAX_CONTROLLER_COUNT 1
  31 #endif
  32
  33 /* Ethernet */
  34
  35 /* Booting Linux */
  36 #define CONFIG_BOOTFILE         "uImage"
  37 #define CONFIG_LOADADDR         0x42000000
  38 #define CONFIG_SYS_LOAD_ADDR    CONFIG_LOADADDR
  39
  40 /* Extra Environment */
  41 #define CONFIG_EXTRA_ENV_SETTINGS \
  42         "update_sd_firmware_filename=u-boot.sd\0" \
  43         "update_sd_firmware="           /* Update the SD firmware partition */ \
  44                 "if mmc rescan ; then " \
  45                 "if tftp ${update_sd_firmware_filename} ; then " \
  46                 "setexpr fw_sz ${filesize} / 0x200 ; "  /* SD block size */ \
  47                 "setexpr fw_sz ${fw_sz} + 1 ; " \
  48                 "mmc write ${loadaddr} 0x800 ${fw_sz} ; " \
  49                 "fi ; " \
  50                 "fi\0" \
  51         "script=boot.scr\0"     \
  52         "uimage=uImage\0" \
  53         "console=ttyAMA0\0" \
  54         "fdt_file=imx23-olinuxino.dtb\0" \
  55         "fdt_addr=0x41000000\0" \
  56         "boot_fdt=try\0" \
  57         "ip_dyn=yes\0" \
  58         "mmcdev=0\0" \
  59         "mmcpart=2\0" \
  60         "mmcroot=/dev/mmcblk0p3 rw rootwait\0" \
  61         "mmcargs=setenv bootargs console=${console},${baudrate} " \
  62                 "root=${mmcroot}\0" \
  63         "loadbootscript="  \
  64                 "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
  65         "bootscript=echo Running bootscript from mmc ...; "     \
  66                 "source\0" \
  67         "loaduimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${uimage}\0" \
  68         "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
  69         "mmcboot=echo Booting from mmc ...; " \
  70                 "run mmcargs; " \
  71                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
  72                         "if run loadfdt; then " \
  73                                 "bootm ${loadaddr} - ${fdt_addr}; " \
  74                         "else " \
  75                                 "if test ${boot_fdt} = try; then " \
  76                                         "bootm; " \
  77                                 "else " \
  78                                         "echo WARN: Cannot load the DT; " \
  79                                 "fi; " \
  80                         "fi; " \
  81                 "else " \
  82                         "bootm; " \
  83                 "fi;\0" \
  84         "netargs=setenv bootargs console=${console},${baudrate} " \
  85                 "root=/dev/nfs " \
  86                 "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
  87         "netboot=echo Booting from net ...; " \
  88                 "usb start; " \
  89                 "run netargs; " \
  90                 "if test ${ip_dyn} = yes; then " \
  91                         "setenv get_cmd dhcp; " \
  92                 "else " \
  93                         "setenv get_cmd tftp; " \
  94                 "fi; " \
  95                 "${get_cmd} ${uimage}; " \
  96                 "if test ${boot_fdt} = yes; then " \
  97                         "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
  98                                 "bootm ${loadaddr} - ${fdt_addr}; " \
  99                         "else " \
 100                                 "if test ${boot_fdt} = try; then " \
 101                                         "bootm; " \
 102                                 "else " \
 103                                         "echo WARN: Cannot load the DT; " \
 104                                 "fi;" \
 105                         "fi; " \
 106                 "else " \
 107                         "bootm; " \
 108                 "fi;\0"
 109
 110 #define CONFIG_BOOTCOMMAND \
 111         "mmc dev ${mmcdev}; if mmc rescan; then " \
 112                 "if run loadbootscript; then " \
 113                         "run bootscript; " \
 114                 "else " \
 115                         "if run loaduimage; then " \
 116                                 "run mmcboot; " \
 117                         "else run netboot; " \
 118                         "fi; " \
 119                 "fi; " \
 120         "else run netboot; fi"
 121
 122 /* The rest of the configuration is shared */
 123 #include <configs/mxs.h>
 124
 125 #endif /* __CONFIGS_MX23_OLINUXINO_H__ */