include/configs/mccmon6.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright (C) 2016-2017
   4  * Lukasz Majewski, DENX Software Engineering, lukma@denx.de
   5  */
   6
   7 #ifndef __CONFIG_H
   8 #define __CONFIG_H
   9
  10 #include "mx6_common.h"
  11
  12 #include "imx6_spl.h"
  13
  14 #define CONFIG_SYS_UBOOT_BASE (CONFIG_SYS_FLASH_BASE + 0x80000)
  15 #define CONFIG_SYS_SPL_ARGS_ADDR        0x18000000
  16
  17 /*
  18  * Below defines are set but NOT really used since we by
  19  * design force U-Boot run when we boot in development
  20  * mode from SD card (SD2)
  21  */
  22 #define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR (0x800)
  23 #define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS (0x80)
  24 #define CONFIG_SPL_FS_LOAD_KERNEL_NAME "fitImage"
  25
  26 #define CONFIG_MXC_UART_BASE            UART1_BASE
  27
  28 /* MMC Configuration */
  29 #define CONFIG_SYS_FSL_USDHC_NUM        2
  30 #define CONFIG_SYS_FSL_ESDHC_ADDR       0
  31
  32 /* NOR 16-bit mode */
  33 #define CONFIG_SYS_FLASH_BASE           WEIM_ARB_BASE_ADDR
  34 #define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT
  35 #define CONFIG_SYS_FLASH_EMPTY_INFO
  36 #define CONFIG_FLASH_VERIFY
  37
  38 /* NOR Flash MTD */
  39 #define CONFIG_SYS_MAX_FLASH_BANKS_DETECT 1
  40 #define CONFIG_SYS_FLASH_BANKS_LIST     { (CONFIG_SYS_FLASH_BASE) }
  41 #define CONFIG_SYS_FLASH_BANKS_SIZES    { (32 * SZ_1M) }
  42
  43 /* Ethernet Configuration */
  44 #define IMX_FEC_BASE                    ENET_BASE_ADDR
  45 #define CONFIG_FEC_MXC_PHYADDR          1
  46
  47 #define CONFIG_EXTRA_ENV_SETTINGS \
  48         "console=ttymxc0,115200 quiet\0" \
  49         "fdt_high=0xffffffff\0" \
  50         "initrd_high=0xffffffff\0" \
  51         "boot_os=yes\0" \
  52         "kernelsize=0x300000\0" \
  53         "disable_giga=yes\0" \
  54         "download_kernel=" \
  55                 "tftpboot ${loadaddr} ${kernel_file};\0" \
  56         "get_boot_medium=" \
  57                 "setenv boot_medium nor;" \
  58                 "setexpr.l _src_sbmr1 *0x020d8004;" \
  59                 "setexpr _b_medium ${_src_sbmr1} '&' 0x00000040;" \
  60                 "if test ${_b_medium} = 40; then " \
  61                         "setenv boot_medium sdcard;" \
  62                 "fi\0" \
  63         "kernel_file=fitImage\0" \
  64         "boot_sd=" \
  65                 "echo '#######################';" \
  66                 "echo '# Factory SDcard Boot #';" \
  67                 "echo '#######################';" \
  68                 "setenv mmcdev 1;" \
  69                 "setenv mmcfactorydev 0;" \
  70                 "setenv mmcfactorypart 1;" \
  71                 "run factory_flash_img;\0" \
  72         "boot_nor=" \
  73                 "setenv kernelnor 0x08180000;" \
  74                 "setenv bootargs console=${console} " \
  75                 CONFIG_MTDPARTS_DEFAULT " " \
  76                 "root=/dev/mmcblk1 rootfstype=ext4 rw rootwait noinitrd;" \
  77                 "cp.l ${kernelnor} ${loadaddr} ${kernelsize};" \
  78                 "bootm ${loadaddr};reset;\0" \
  79         "boot_recovery=" \
  80                 "echo '#######################';" \
  81                 "echo '# RECOVERY SWU Boot   #';" \
  82                 "echo '#######################';" \
  83                 "setenv rootfsloadaddr 0x13000000;" \
  84                 "setenv swukernelnor 0x08980000;" \
  85                 "setenv swurootfsnor 0x09180000;" \
  86                 "setenv bootargs console=${console} " \
  87                 CONFIG_MTDPARTS_DEFAULT " " \
  88                 "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
  89                     ":${hostname}::off root=/dev/ram rw;" \
  90                 "cp.l ${swurootfsnor} ${rootfsloadaddr} 0x200000;" \
  91                 "cp.l ${swukernelnor} ${loadaddr} ${kernelsize};" \
  92                 "bootm ${loadaddr} ${rootfsloadaddr};reset;\0" \
  93         "boot_tftp=" \
  94                 "echo '#######################';" \
  95                 "echo '# TFTP Boot           #';" \
  96                 "echo '#######################';" \
  97                 "if run download_kernel; then " \
  98                      "setenv bootargs console=${console} " \
  99                      "root=/dev/mmcblk0p2 rootwait;" \
 100                      "bootm $loadaddr};reset;" \
 101                 "fi\0" \
 102         "bootcmd=" \
 103                 "if test -n ${recovery_status}; then " \
 104                      "run boot_recovery;" \
 105                 "else " \
 106                      "if test ! -n ${boot_medium}; then " \
 107                           "run get_boot_medium;" \
 108                           "if test ${boot_medium} = sdcard; then " \
 109                               "run boot_sd;" \
 110                           "else " \
 111                               "run boot_nor;" \
 112                           "fi;" \
 113                      "else " \
 114                           "if test ${boot_medium} = tftp; then " \
 115                               "run boot_tftp;" \
 116                           "fi;" \
 117                      "fi;" \
 118                 "fi\0" \
 119         "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
 120         "bootdev=1\0" \
 121         "bootpart=1\0" \
 122         "netdev=eth0\0" \
 123         "load_addr=0x11000000\0" \
 124         "uboot_file=u-boot.img\0" \
 125         "SPL_file=SPL\0" \
 126         "load_uboot=tftp ${load_addr} ${uboot_file}\0" \
 127         "nor_img_addr=0x11000000\0" \
 128         "nor_img_file=core-image-lwn-mccmon6.nor\0" \
 129         "emmc_img_file=core-image-lwn-mccmon6.ext4\0" \
 130         "nor_bank_start=" __stringify(CONFIG_SYS_FLASH_BASE) "\0" \
 131         "nor_img_size=0x02000000\0" \
 132         "factory_script_file=factory.scr\0" \
 133         "factory_load_script=" \
 134                 "if test -e mmc ${mmcdev}:${mmcfactorypart} " \
 135                     "${factory_script_file}; then " \
 136                     "load mmc ${mmcdev}:${mmcfactorypart} " \
 137                      "${loadaddr} ${factory_script_file};" \
 138                 "fi\0" \
 139         "factory_script=echo Running factory script from mmc${mmcdev} ...; " \
 140                 "source ${loadaddr}\0" \
 141         "factory_flash_img="\
 142                 "echo 'Flash mccmon6 with factory images'; " \
 143                 "if run factory_load_script; then " \
 144                         "run factory_script;" \
 145                 "else " \
 146                     "echo No factory script: ${factory_script_file} found on " \
 147                     "device ${mmcdev};" \
 148                     "run factory_nor_img;" \
 149                     "run factory_eMMC_img;" \
 150                     "run factory_SPL_falcon_setup;" \
 151                 "fi\0" \
 152         "factory_eMMC_img="\
 153                 "echo 'Update mccmon6 eMMC image'; " \
 154                 "if load mmc ${mmcdev}:${mmcfactorypart} " \
 155                     "${loadaddr} ${emmc_img_file}; then " \
 156                     "setexpr fw_sz ${filesize} / 0x200;" \
 157                     "setexpr fw_sz ${fw_sz} + 1;" \
 158                     "mmc dev ${mmcfactorydev};" \
 159                     "mmc write ${loadaddr} 0x0 ${fw_sz};" \
 160                 "fi\0" \
 161         "factory_nor_img="\
 162                 "echo 'Update mccmon6 NOR image'; " \
 163                 "if load mmc ${mmcdev}:${mmcfactorypart} " \
 164                     "${nor_img_addr} ${nor_img_file}; then " \
 165                         "run nor_update;" \
 166                 "fi\0" \
 167         "nor_update=" \
 168                     "protect off ${nor_bank_start} +${nor_img_size};" \
 169                     "erase ${nor_bank_start} +${nor_img_size};" \
 170                     "setexpr nor_img_size ${nor_img_size} / 4; " \
 171                     "cp.l ${nor_img_addr} ${nor_bank_start} ${nor_img_size}\0" \
 172         "factory_SPL_falcon_setup="\
 173                 "echo 'Write Falcon boot data'; " \
 174                 "setenv kernelnor 0x08180000;" \
 175                 "cp.l ${kernelnor} ${loadaddr} ${kernelsize};" \
 176                 "spl export fdt ${loadaddr};" \
 177                 "setenv nor_img_addr ${fdtargsaddr};" \
 178                 "setenv nor_img_size 0x20000;" \
 179                 "setenv nor_bank_start " \
 180                                 __stringify(CONFIG_CMD_SPL_NOR_OFS)";" \
 181                 "run nor_update\0" \
 182         "tftp_nor_uboot="\
 183                 "echo 'Update mccmon6 NOR U-BOOT via TFTP'; " \
 184                 "setenv nor_img_file u-boot.img; " \
 185                 "setenv nor_img_size 0x80000; " \
 186                 "setenv nor_bank_start 0x08080000; " \
 187                 "if tftpboot ${nor_img_addr} ${nor_img_file}; then " \
 188                     "run nor_update;" \
 189                 "fi\0" \
 190         "tftp_nor_fitImg="\
 191                 "echo 'Update mccmon6 NOR fitImage via TFTP'; " \
 192                 "setenv nor_img_file fitImage; " \
 193                 "setenv nor_img_size 0x500000; " \
 194                 "setenv nor_bank_start 0x08180000; " \
 195                 "if tftpboot ${nor_img_addr} ${nor_img_file}; then " \
 196                     "run nor_update;" \
 197                 "fi\0" \
 198         "tftp_nor_img="\
 199                 "echo 'Update mccmon6 NOR image via TFTP'; " \
 200                 "if tftpboot ${nor_img_addr} ${nor_img_file}; then " \
 201                     "run nor_update;" \
 202                 "fi\0" \
 203         "tftp_nor_SPL="\
 204                 "if tftp ${load_addr} SPL_padded; then " \
 205                     "erase 0x08000000 +0x20000;" \
 206                     "cp.b ${load_addr} 0x08000000 0x20000;" \
 207                 "fi;\0" \
 208         "tftp_sd_SPL="\
 209             "if mmc dev 1; then "      \
 210                 "if tftp ${load_addr} ${SPL_file}; then " \
 211                     "setexpr fw_sz ${filesize} / 0x200; " \
 212                     "setexpr fw_sz ${fw_sz} + 1; " \
 213                     "mmc write ${load_addr} 0x2 ${fw_sz};" \
 214                 "fi;" \
 215             "fi;\0" \
 216         "tftp_sd_uboot="\
 217             "if mmc dev 1; then "      \
 218                 "if run load_uboot; then " \
 219                     "setexpr fw_sz ${filesize} / 0x200; " \
 220                     "setexpr fw_sz ${fw_sz} + 1; " \
 221                     "mmc write ${load_addr} 0x8A ${fw_sz};" \
 222                 "fi;" \
 223             "fi;\0"
 224
 225 /* Physical Memory Map */
 226 #define PHYS_SDRAM                      MMDC0_ARB_BASE_ADDR
 227
 228 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM
 229 #define CONFIG_SYS_INIT_RAM_ADDR        IRAM_BASE_ADDR
 230 #define CONFIG_SYS_INIT_RAM_SIZE        IRAM_SIZE
 231
 232 #define CONFIG_SYS_INIT_SP_OFFSET \
 233         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 234 #define CONFIG_SYS_INIT_SP_ADDR \
 235         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 236
 237 /* Environment organization */
 238
 239 /* Envs are stored in NOR flash */
 240
 241 #endif                         /* __CONFIG_H * */