include/configs/mccmon6.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright (C) 2016-2017
   4  * Lukasz Majewski, DENX Software Engineering, lukma@denx.de
   5  */
   6
   7 #ifndef __CONFIG_H
   8 #define __CONFIG_H
   9
  10 #include "mx6_common.h"
  11
  12 #include "imx6_spl.h"
  13
  14 #define CONFIG_SYS_UBOOT_BASE (CONFIG_SYS_FLASH_BASE + 0x80000)
  15
  16 /*
  17  * Below defines are set but NOT really used since we by
  18  * design force U-Boot run when we boot in development
  19  * mode from SD card (SD2)
  20  */
  21
  22 #define CONFIG_MXC_UART_BASE            UART1_BASE
  23
  24 /* MMC Configuration */
  25 #define CONFIG_SYS_FSL_USDHC_NUM        2
  26 #define CONFIG_SYS_FSL_ESDHC_ADDR       0
  27
  28 /* NOR 16-bit mode */
  29 #define CONFIG_SYS_FLASH_BASE           WEIM_ARB_BASE_ADDR
  30 #define CONFIG_FLASH_VERIFY
  31
  32 /* NOR Flash MTD */
  33 #define CONFIG_SYS_FLASH_BANKS_LIST     { (CONFIG_SYS_FLASH_BASE) }
  34 #define CONFIG_SYS_FLASH_BANKS_SIZES    { (32 * SZ_1M) }
  35
  36 /* Ethernet Configuration */
  37 #define CONFIG_FEC_MXC_PHYADDR          1
  38
  39 #define CONFIG_EXTRA_ENV_SETTINGS \
  40         "console=ttymxc0,115200 quiet\0" \
  41         "fdt_high=0xffffffff\0" \
  42         "initrd_high=0xffffffff\0" \
  43         "boot_os=yes\0" \
  44         "kernelsize=0x300000\0" \
  45         "disable_giga=yes\0" \
  46         "download_kernel=" \
  47                 "tftpboot ${loadaddr} ${kernel_file};\0" \
  48         "get_boot_medium=" \
  49                 "setenv boot_medium nor;" \
  50                 "setexpr.l _src_sbmr1 *0x020d8004;" \
  51                 "setexpr _b_medium ${_src_sbmr1} '&' 0x00000040;" \
  52                 "if test ${_b_medium} = 40; then " \
  53                         "setenv boot_medium sdcard;" \
  54                 "fi\0" \
  55         "kernel_file=fitImage\0" \
  56         "boot_sd=" \
  57                 "echo '#######################';" \
  58                 "echo '# Factory SDcard Boot #';" \
  59                 "echo '#######################';" \
  60                 "setenv mmcdev 1;" \
  61                 "setenv mmcfactorydev 0;" \
  62                 "setenv mmcfactorypart 1;" \
  63                 "run factory_flash_img;\0" \
  64         "boot_nor=" \
  65                 "setenv kernelnor 0x08180000;" \
  66                 "setenv bootargs console=${console} " \
  67                 CONFIG_MTDPARTS_DEFAULT " " \
  68                 "root=/dev/mmcblk1 rootfstype=ext4 rw rootwait noinitrd;" \
  69                 "cp.l ${kernelnor} ${loadaddr} ${kernelsize};" \
  70                 "bootm ${loadaddr};reset;\0" \
  71         "boot_recovery=" \
  72                 "echo '#######################';" \
  73                 "echo '# RECOVERY SWU Boot   #';" \
  74                 "echo '#######################';" \
  75                 "setenv rootfsloadaddr 0x13000000;" \
  76                 "setenv swukernelnor 0x08980000;" \
  77                 "setenv swurootfsnor 0x09180000;" \
  78                 "setenv bootargs console=${console} " \
  79                 CONFIG_MTDPARTS_DEFAULT " " \
  80                 "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
  81                     ":${hostname}::off root=/dev/ram rw;" \
  82                 "cp.l ${swurootfsnor} ${rootfsloadaddr} 0x200000;" \
  83                 "cp.l ${swukernelnor} ${loadaddr} ${kernelsize};" \
  84                 "bootm ${loadaddr} ${rootfsloadaddr};reset;\0" \
  85         "boot_tftp=" \
  86                 "echo '#######################';" \
  87                 "echo '# TFTP Boot           #';" \
  88                 "echo '#######################';" \
  89                 "if run download_kernel; then " \
  90                      "setenv bootargs console=${console} " \
  91                      "root=/dev/mmcblk0p2 rootwait;" \
  92                      "bootm $loadaddr};reset;" \
  93                 "fi\0" \
  94         "bootcmd=" \
  95                 "if test -n ${recovery_status}; then " \
  96                      "run boot_recovery;" \
  97                 "else " \
  98                      "if test ! -n ${boot_medium}; then " \
  99                           "run get_boot_medium;" \
 100                           "if test ${boot_medium} = sdcard; then " \
 101                               "run boot_sd;" \
 102                           "else " \
 103                               "run boot_nor;" \
 104                           "fi;" \
 105                      "else " \
 106                           "if test ${boot_medium} = tftp; then " \
 107                               "run boot_tftp;" \
 108                           "fi;" \
 109                      "fi;" \
 110                 "fi\0" \
 111         "bootdev=1\0" \
 112         "bootpart=1\0" \
 113         "netdev=eth0\0" \
 114         "load_addr=0x11000000\0" \
 115         "uboot_file=u-boot.img\0" \
 116         "SPL_file=SPL\0" \
 117         "load_uboot=tftp ${load_addr} ${uboot_file}\0" \
 118         "nor_img_addr=0x11000000\0" \
 119         "nor_img_file=core-image-lwn-mccmon6.nor\0" \
 120         "emmc_img_file=core-image-lwn-mccmon6.ext4\0" \
 121         "nor_bank_start=" __stringify(CONFIG_SYS_FLASH_BASE) "\0" \
 122         "nor_img_size=0x02000000\0" \
 123         "factory_script_file=factory.scr\0" \
 124         "factory_load_script=" \
 125                 "if test -e mmc ${mmcdev}:${mmcfactorypart} " \
 126                     "${factory_script_file}; then " \
 127                     "load mmc ${mmcdev}:${mmcfactorypart} " \
 128                      "${loadaddr} ${factory_script_file};" \
 129                 "fi\0" \
 130         "factory_script=echo Running factory script from mmc${mmcdev} ...; " \
 131                 "source ${loadaddr}\0" \
 132         "factory_flash_img="\
 133                 "echo 'Flash mccmon6 with factory images'; " \
 134                 "if run factory_load_script; then " \
 135                         "run factory_script;" \
 136                 "else " \
 137                     "echo No factory script: ${factory_script_file} found on " \
 138                     "device ${mmcdev};" \
 139                     "run factory_nor_img;" \
 140                     "run factory_eMMC_img;" \
 141                     "run factory_SPL_falcon_setup;" \
 142                 "fi\0" \
 143         "factory_eMMC_img="\
 144                 "echo 'Update mccmon6 eMMC image'; " \
 145                 "if load mmc ${mmcdev}:${mmcfactorypart} " \
 146                     "${loadaddr} ${emmc_img_file}; then " \
 147                     "setexpr fw_sz ${filesize} / 0x200;" \
 148                     "setexpr fw_sz ${fw_sz} + 1;" \
 149                     "mmc dev ${mmcfactorydev};" \
 150                     "mmc write ${loadaddr} 0x0 ${fw_sz};" \
 151                 "fi\0" \
 152         "factory_nor_img="\
 153                 "echo 'Update mccmon6 NOR image'; " \
 154                 "if load mmc ${mmcdev}:${mmcfactorypart} " \
 155                     "${nor_img_addr} ${nor_img_file}; then " \
 156                         "run nor_update;" \
 157                 "fi\0" \
 158         "nor_update=" \
 159                     "protect off ${nor_bank_start} +${nor_img_size};" \
 160                     "erase ${nor_bank_start} +${nor_img_size};" \
 161                     "setexpr nor_img_size ${nor_img_size} / 4; " \
 162                     "cp.l ${nor_img_addr} ${nor_bank_start} ${nor_img_size}\0" \
 163         "factory_SPL_falcon_setup="\
 164                 "echo 'Write Falcon boot data'; " \
 165                 "setenv kernelnor 0x08180000;" \
 166                 "cp.l ${kernelnor} ${loadaddr} ${kernelsize};" \
 167                 "spl export fdt ${loadaddr};" \
 168                 "setenv nor_img_addr ${fdtargsaddr};" \
 169                 "setenv nor_img_size 0x20000;" \
 170                 "setenv nor_bank_start " \
 171                                 __stringify(CONFIG_CMD_SPL_NOR_OFS)";" \
 172                 "run nor_update\0" \
 173         "tftp_nor_uboot="\
 174                 "echo 'Update mccmon6 NOR U-BOOT via TFTP'; " \
 175                 "setenv nor_img_file u-boot.img; " \
 176                 "setenv nor_img_size 0x80000; " \
 177                 "setenv nor_bank_start 0x08080000; " \
 178                 "if tftpboot ${nor_img_addr} ${nor_img_file}; then " \
 179                     "run nor_update;" \
 180                 "fi\0" \
 181         "tftp_nor_fitImg="\
 182                 "echo 'Update mccmon6 NOR fitImage via TFTP'; " \
 183                 "setenv nor_img_file fitImage; " \
 184                 "setenv nor_img_size 0x500000; " \
 185                 "setenv nor_bank_start 0x08180000; " \
 186                 "if tftpboot ${nor_img_addr} ${nor_img_file}; then " \
 187                     "run nor_update;" \
 188                 "fi\0" \
 189         "tftp_nor_img="\
 190                 "echo 'Update mccmon6 NOR image via TFTP'; " \
 191                 "if tftpboot ${nor_img_addr} ${nor_img_file}; then " \
 192                     "run nor_update;" \
 193                 "fi\0" \
 194         "tftp_nor_SPL="\
 195                 "if tftp ${load_addr} SPL_padded; then " \
 196                     "erase 0x08000000 +0x20000;" \
 197                     "cp.b ${load_addr} 0x08000000 0x20000;" \
 198                 "fi;\0" \
 199         "tftp_sd_SPL="\
 200             "if mmc dev 1; then "      \
 201                 "if tftp ${load_addr} ${SPL_file}; then " \
 202                     "setexpr fw_sz ${filesize} / 0x200; " \
 203                     "setexpr fw_sz ${fw_sz} + 1; " \
 204                     "mmc write ${load_addr} 0x2 ${fw_sz};" \
 205                 "fi;" \
 206             "fi;\0" \
 207         "tftp_sd_uboot="\
 208             "if mmc dev 1; then "      \
 209                 "if run load_uboot; then " \
 210                     "setexpr fw_sz ${filesize} / 0x200; " \
 211                     "setexpr fw_sz ${fw_sz} + 1; " \
 212                     "mmc write ${load_addr} 0x8A ${fw_sz};" \
 213                 "fi;" \
 214             "fi;\0"
 215
 216 /* Physical Memory Map */
 217 #define PHYS_SDRAM                      MMDC0_ARB_BASE_ADDR
 218
 219 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM
 220 #define CONFIG_SYS_INIT_RAM_ADDR        IRAM_BASE_ADDR
 221 #define CONFIG_SYS_INIT_RAM_SIZE        IRAM_SIZE
 222
 223 /* Environment organization */
 224
 225 /* Envs are stored in NOR flash */
 226
 227 #endif                         /* __CONFIG_H * */