include/configs/ma5d4evk.h

   1 /*
   2  * DENX MA5D4 configuration
   3  * Copyright (C) 2015 Marek Vasut <marex@denx.de>
   4  *
   5  * SPDX-License-Identifier:     GPL-2.0+
   6  */
   7
   8 #ifndef __MA5D4EVK_CONFIG_H__
   9 #define __MA5D4EVK_CONFIG_H__
  10
  11 #define CONFIG_SYS_NO_FLASH
  12
  13 #define CONFIG_TIMESTAMP                /* Print image info with timestamp */
  14
  15 #include "at91-sama5_common.h"
  16 #undef CONFIG_BOOTARGS
  17 #define CONFIG_SYS_USE_SERIALFLASH      1
  18
  19 /*
  20  * U-Boot Commands
  21  */
  22 #define CONFIG_DOS_PARTITION
  23 #define CONFIG_FAT_WRITE
  24 /*#define CONFIG_LCD*/
  25
  26 #define CONFIG_CMD_ASKENV
  27 #define CONFIG_CMD_CACHE
  28 #define CONFIG_CMD_DHCP
  29 #define CONFIG_CMD_EXT4
  30 #define CONFIG_CMD_EXT4_WRITE
  31 #define CONFIG_CMD_FAT
  32 #define CONFIG_CMD_FS_GENERIC
  33 #define CONFIG_CMD_GREPENV
  34 #define CONFIG_CMD_MII
  35 #define CONFIG_CMD_MMC
  36 #define CONFIG_CMD_PING
  37 #define CONFIG_CMD_SF
  38 #define CONFIG_CMD_USB
  39
  40 /*
  41  * Memory configurations
  42  */
  43 #define CONFIG_NR_DRAM_BANKS            1
  44 #define CONFIG_SYS_SDRAM_BASE           ATMEL_BASE_DDRCS
  45 #define CONFIG_SYS_SDRAM_SIZE           0x10000000
  46
  47 #ifdef CONFIG_SPL_BUILD
  48 #define CONFIG_SYS_INIT_SP_ADDR         0x210000
  49 #else
  50 #define CONFIG_SYS_INIT_SP_ADDR \
  51         (CONFIG_SYS_SDRAM_BASE + 4 * 1024 - GENERATED_GBL_DATA_SIZE)
  52 #endif
  53
  54 /*
  55  * Environment
  56  */
  57 #define CONFIG_ENV_IS_IN_SPI_FLASH
  58 #define CONFIG_SYS_REDUNDAND_ENVIRONMENT
  59 #define CONFIG_ENV_OFFSET               0x8000
  60 #define CONFIG_ENV_SIZE                 0x4000
  61 #define CONFIG_ENV_OFFSET_REDUND        (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)
  62 #define CONFIG_ENV_SIZE_REDUND          CONFIG_ENV_SIZE
  63 #define CONFIG_ENV_SECT_SIZE            0x1000
  64
  65 /*
  66  * U-Boot general configurations
  67  */
  68 #define CONFIG_VERSION_VARIABLE                 /* U-BOOT version */
  69
  70 /*
  71  * Serial Driver
  72  */
  73 #define CONFIG_ATMEL_USART
  74 #define CONFIG_USART_BASE               ATMEL_BASE_USART0
  75 #define CONFIG_USART_ID                 ATMEL_ID_USART0
  76
  77 /*
  78  * Ethernet
  79  */
  80 #ifdef CONFIG_CMD_NET
  81 #define CONFIG_MACB
  82 #define CONFIG_RMII
  83 #define CONFIG_NET_RETRY_COUNT          20
  84 #define CONFIG_MACB_SEARCH_PHY
  85 #define CONFIG_ARP_TIMEOUT              200UL
  86 #define CONFIG_IP_DEFRAG
  87 #endif
  88
  89 /*
  90  * LCD
  91  */
  92 #ifdef CONFIG_LCD
  93 #define CONFIG_CMD_BMP
  94 #define CONFIG_BMP_16BPP
  95 #define CONFIG_BMP_24BPP
  96 #define CONFIG_BMP_32BPP
  97 #define LCD_BPP                         LCD_COLOR16
  98 #define LCD_OUTPUT_BPP                  24
  99 #define CONFIG_ATMEL_HLCD
 100 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
 101 #endif
 102
 103 /*
 104  * SD/MMC
 105  */
 106 #ifdef CONFIG_CMD_MMC
 107 #define CONFIG_MMC
 108 #define CONFIG_GENERIC_MMC
 109 #define CONFIG_GENERIC_ATMEL_MCI
 110 #endif
 111
 112 /*
 113  * SPI NOR (boot memory)
 114  */
 115 #ifdef CONFIG_CMD_SF
 116 #define CONFIG_ATMEL_SPI
 117 #define CONFIG_ATMEL_SPI0
 118 #define CONFIG_SPI_FLASH_ATMEL
 119 #define CONFIG_SF_DEFAULT_BUS           0
 120 #define CONFIG_SF_DEFAULT_CS            0
 121 #define CONFIG_SF_DEFAULT_SPEED         30000000
 122 #endif
 123
 124 /*
 125  * USB
 126  */
 127 #ifdef CONFIG_CMD_USB
 128 #define CONFIG_USB_EHCI
 129 #define CONFIG_USB_EHCI_ATMEL
 130 #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS      3
 131 #define CONFIG_USB_STORAGE
 132
 133 /* USB device */
 134 #define CONFIG_USB_ETHER
 135 #define CONFIG_USB_ETH_RNDIS
 136 #define CONFIG_USBNET_MANUFACTURER      "DENX"
 137 #endif
 138
 139 /*
 140  * Boot Linux
 141  */
 142 #define CONFIG_CMDLINE_TAG
 143 #define CONFIG_INITRD_TAG
 144 #define CONFIG_SETUP_MEMORY_TAGS
 145 #define CONFIG_BOOTDELAY        3
 146 #define CONFIG_BOOTFILE         "fitImage"
 147 #define CONFIG_BOOTARGS         "console=ttyS3,115200"
 148 #define CONFIG_LOADADDR         0x20800000
 149 #define CONFIG_BOOTCOMMAND      "run mmc_mmc"
 150 #define CONFIG_SYS_LOAD_ADDR    CONFIG_LOADADDR
 151
 152 /*
 153  * Extra Environments
 154  */
 155 #define CONFIG_PREBOOT          "run try_bootscript"
 156 #define CONFIG_HOSTNAME         ma5d4evk
 157
 158 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
 159         "consdev=ttyS3\0"                                               \
 160         "baudrate=115200\0"                                             \
 161         "bootscript=boot.scr\0"                                         \
 162         "bootdev=/dev/mmcblk1p1\0"                                      \
 163         "bootpart=1:1\0"                                                \
 164         "rootdev=/dev/mmcblk1p2\0"                                      \
 165         "netdev=eth0\0"                                                 \
 166         "kernel_addr_r=0x22000000\0"                                    \
 167         "update_spi_firmware_spl_addr=0x21000000\0"                     \
 168         "update_spi_firmware_spl_filename=boot.bin\0"                   \
 169         "update_spi_firmware_addr=0x22000000\0"                         \
 170         "update_spi_firmware_filename=u-boot.img\0"                     \
 171         "update_spi_firmware="  /* Update the SPI flash firmware */     \
 172                 "if sf probe ; then "                                   \
 173                 "if tftp ${update_spi_firmware_spl_addr} "              \
 174                         "${update_spi_firmware_spl_filename} ; then "   \
 175                 "setenv update_spi_firmware_spl_filesize ${filesize} ; "\
 176                 "if tftp ${update_spi_firmware_addr} "                  \
 177                         "${update_spi_firmware_filename} ; then "       \
 178                 "setenv update_spi_firmware_filesize ${filesize} ; "    \
 179                 "sf update ${update_spi_firmware_spl_addr} 0x0 "        \
 180                         "${update_spi_firmware_spl_filesize} ; "        \
 181                 "sf update ${update_spi_firmware_addr} 0x10000 "        \
 182                         "${update_spi_firmware_filesize} ; "            \
 183                 "fi ; "                                                 \
 184                 "fi ; "                                                 \
 185                 "fi\0"                                                  \
 186         "addcons="                                                      \
 187                 "setenv bootargs ${bootargs} "                          \
 188                 "console=${consdev},${baudrate}\0"                      \
 189         "addip="                                                        \
 190                 "setenv bootargs ${bootargs} "                          \
 191                 "ip=${ipaddr}:${serverip}:${gatewayip}:"                \
 192                         "${netmask}:${hostname}:${netdev}:off\0"        \
 193         "addmisc="                                                      \
 194                 "setenv bootargs ${bootargs} ${miscargs}\0"             \
 195         "addargs=run addcons addmisc\0"                                 \
 196         "mmcload="                                                      \
 197                 "mmc rescan ; "                                         \
 198                 "load mmc ${bootpart} ${kernel_addr_r} ${bootfile}\0"   \
 199         "netload="                                                      \
 200                 "tftp ${kernel_addr_r} ${hostname}/${bootfile}\0"       \
 201         "miscargs=nohlt panic=1\0"                                      \
 202         "mmcargs=setenv bootargs root=${rootdev} rw rootwait\0"         \
 203         "nfsargs="                                                      \
 204                 "setenv bootargs root=/dev/nfs rw "                     \
 205                         "nfsroot=${serverip}:${rootpath},v3,tcp\0"      \
 206         "mmc_mmc="                                                      \
 207                 "run mmcload mmcargs addargs ; "                        \
 208                 "bootm ${kernel_addr_r}\0"                              \
 209         "mmc_nfs="                                                      \
 210                 "run mmcload nfsargs addip addargs ; "                  \
 211                 "bootm ${kernel_addr_r}\0"                              \
 212         "net_mmc="                                                      \
 213                 "run netload mmcargs addargs ; "                        \
 214                 "bootm ${kernel_addr_r}\0"                              \
 215         "net_nfs="                                                      \
 216                 "run netload nfsargs addip addargs ; "                  \
 217                 "bootm ${kernel_addr_r}\0"                              \
 218         "try_bootscript="                                               \
 219                 "mmc rescan;"                                           \
 220                 "if test -e mmc ${bootpart} ${bootscript} ; then "      \
 221                 "if load mmc ${bootpart} ${kernel_addr_r} ${bootscript};"\
 222                 "then ; "                                               \
 223                         "echo Running bootscript... ; "                 \
 224                         "source ${kernel_addr_r} ; "                    \
 225                 "fi ; "                                                 \
 226                 "fi\0"
 227 /* SPL */
 228 #define CONFIG_SPL_FRAMEWORK
 229 #define CONFIG_SPL_TEXT_BASE            0x200000
 230 #define CONFIG_SPL_MAX_SIZE             0x10000
 231 #define CONFIG_SPL_BSS_START_ADDR       0x20000000
 232 #define CONFIG_SPL_BSS_MAX_SIZE         0x80000
 233 #define CONFIG_SYS_SPL_MALLOC_START     0x20080000
 234 #define CONFIG_SYS_SPL_MALLOC_SIZE      0x80000
 235
 236 #define CONFIG_SPL_LIBCOMMON_SUPPORT
 237 #define CONFIG_SPL_LIBGENERIC_SUPPORT
 238 #define CONFIG_SPL_GPIO_SUPPORT
 239 #define CONFIG_SPL_SERIAL_SUPPORT
 240
 241 #define CONFIG_SPL_BOARD_INIT
 242 #define CONFIG_SYS_MONITOR_LEN          (512 << 10)
 243
 244 #define CONFIG_SPL_SPI_SUPPORT
 245 #define CONFIG_SPL_SPI_FLASH_SUPPORT
 246 #define CONFIG_SPL_SPI_LOAD
 247 #define CONFIG_SYS_SPI_U_BOOT_OFFS      0x10000
 248
 249 #endif  /* __MA5D4EVK_CONFIG_H__ */