include/configs/ma5d4evk.h

   1 /*
   2  * DENX MA5D4 configuration
   3  * Copyright (C) 2015 Marek Vasut <marex@denx.de>
   4  *
   5  * SPDX-License-Identifier:     GPL-2.0+
   6  */
   7
   8 #ifndef __MA5D4EVK_CONFIG_H__
   9 #define __MA5D4EVK_CONFIG_H__
  10
  11 #define CONFIG_TIMESTAMP                /* Print image info with timestamp */
  12
  13 #include "at91-sama5_common.h"
  14 #undef CONFIG_BOOTARGS
  15 #define CONFIG_SYS_USE_SERIALFLASH      1
  16
  17 /*
  18  * U-Boot Commands
  19  */
  20 #define CONFIG_FAT_WRITE
  21
  22 /*
  23  * Memory configurations
  24  */
  25 #define CONFIG_NR_DRAM_BANKS            1
  26 #define CONFIG_SYS_SDRAM_BASE           ATMEL_BASE_DDRCS
  27 #define CONFIG_SYS_SDRAM_SIZE           0x10000000
  28
  29 #ifdef CONFIG_SPL_BUILD
  30 #define CONFIG_SYS_INIT_SP_ADDR         0x210000
  31 #else
  32 #define CONFIG_SYS_INIT_SP_ADDR \
  33         (CONFIG_SYS_SDRAM_BASE + 4 * 1024 - GENERATED_GBL_DATA_SIZE)
  34 #endif
  35
  36 /*
  37  * Environment
  38  */
  39 #define CONFIG_ENV_IS_IN_SPI_FLASH
  40 #define CONFIG_SYS_REDUNDAND_ENVIRONMENT
  41 #define CONFIG_ENV_OFFSET               0x8000
  42 #define CONFIG_ENV_SIZE                 0x4000
  43 #define CONFIG_ENV_OFFSET_REDUND        (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)
  44 #define CONFIG_ENV_SIZE_REDUND          CONFIG_ENV_SIZE
  45 #define CONFIG_ENV_SECT_SIZE            0x1000
  46
  47 /*
  48  * U-Boot general configurations
  49  */
  50
  51 /*
  52  * Serial Driver
  53  */
  54 #define CONFIG_ATMEL_USART
  55 #define CONFIG_USART_BASE               ATMEL_BASE_USART0
  56 #define CONFIG_USART_ID                 ATMEL_ID_USART0
  57
  58 /*
  59  * Ethernet
  60  */
  61 #ifdef CONFIG_CMD_NET
  62 #define CONFIG_MACB
  63 #define CONFIG_RMII
  64 #define CONFIG_NET_RETRY_COUNT          20
  65 #define CONFIG_MACB_SEARCH_PHY
  66 #define CONFIG_ARP_TIMEOUT              200UL
  67 #define CONFIG_IP_DEFRAG
  68 #endif
  69
  70 /*
  71  * LCD
  72  */
  73 #ifdef CONFIG_LCD
  74 #define CONFIG_CMD_BMP
  75 #define CONFIG_BMP_16BPP
  76 #define CONFIG_BMP_24BPP
  77 #define CONFIG_BMP_32BPP
  78 #define LCD_BPP                         LCD_COLOR16
  79 #define LCD_OUTPUT_BPP                  24
  80 #define CONFIG_ATMEL_HLCD
  81 #endif
  82
  83 /*
  84  * SD/MMC
  85  */
  86 #ifdef CONFIG_CMD_MMC
  87 #define CONFIG_GENERIC_ATMEL_MCI
  88 #endif
  89
  90 /*
  91  * SPI NOR (boot memory)
  92  */
  93 #ifdef CONFIG_CMD_SF
  94 #define CONFIG_ATMEL_SPI
  95 #define CONFIG_ATMEL_SPI0
  96 #define CONFIG_SPI_FLASH_ATMEL
  97 #define CONFIG_SF_DEFAULT_BUS           0
  98 #define CONFIG_SF_DEFAULT_CS            0
  99 #define CONFIG_SF_DEFAULT_SPEED         30000000
 100 #endif
 101
 102 /*
 103  * USB
 104  */
 105 #ifdef CONFIG_CMD_USB
 106 #define CONFIG_USB_EHCI
 107 #define CONFIG_USB_EHCI_ATMEL
 108 #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS      3
 109
 110 /* USB device */
 111 #define CONFIG_USB_ETHER
 112 #define CONFIG_USB_ETH_RNDIS
 113 #define CONFIG_USBNET_MANUFACTURER      "DENX"
 114 #endif
 115
 116 /*
 117  * Boot Linux
 118  */
 119 #define CONFIG_CMDLINE_TAG
 120 #define CONFIG_INITRD_TAG
 121 #define CONFIG_SETUP_MEMORY_TAGS
 122 #define CONFIG_BOOTFILE         "fitImage"
 123 #define CONFIG_BOOTARGS         "console=ttyS3,115200"
 124 #define CONFIG_LOADADDR         0x20800000
 125 #define CONFIG_BOOTCOMMAND      "run mmc_mmc"
 126 #define CONFIG_SYS_LOAD_ADDR    CONFIG_LOADADDR
 127
 128 /*
 129  * Extra Environments
 130  */
 131 #define CONFIG_PREBOOT          "run try_bootscript"
 132 #define CONFIG_HOSTNAME         ma5d4evk
 133
 134 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
 135         "consdev=ttyS3\0"                                               \
 136         "baudrate=115200\0"                                             \
 137         "bootscript=boot.scr\0"                                         \
 138         "bootdev=/dev/mmcblk1p1\0"                                      \
 139         "bootpart=1:1\0"                                                \
 140         "rootdev=/dev/mmcblk1p2\0"                                      \
 141         "netdev=eth0\0"                                                 \
 142         "kernel_addr_r=0x22000000\0"                                    \
 143         "update_spi_firmware_spl_addr=0x21000000\0"                     \
 144         "update_spi_firmware_spl_filename=boot.bin\0"                   \
 145         "update_spi_firmware_addr=0x22000000\0"                         \
 146         "update_spi_firmware_filename=u-boot.img\0"                     \
 147         "update_spi_firmware="  /* Update the SPI flash firmware */     \
 148                 "if sf probe ; then "                                   \
 149                 "if tftp ${update_spi_firmware_spl_addr} "              \
 150                         "${update_spi_firmware_spl_filename} ; then "   \
 151                 "setenv update_spi_firmware_spl_filesize ${filesize} ; "\
 152                 "if tftp ${update_spi_firmware_addr} "                  \
 153                         "${update_spi_firmware_filename} ; then "       \
 154                 "setenv update_spi_firmware_filesize ${filesize} ; "    \
 155                 "sf update ${update_spi_firmware_spl_addr} 0x0 "        \
 156                         "${update_spi_firmware_spl_filesize} ; "        \
 157                 "sf update ${update_spi_firmware_addr} 0x10000 "        \
 158                         "${update_spi_firmware_filesize} ; "            \
 159                 "fi ; "                                                 \
 160                 "fi ; "                                                 \
 161                 "fi\0"                                                  \
 162         "addcons="                                                      \
 163                 "setenv bootargs ${bootargs} "                          \
 164                 "console=${consdev},${baudrate}\0"                      \
 165         "addip="                                                        \
 166                 "setenv bootargs ${bootargs} "                          \
 167                 "ip=${ipaddr}:${serverip}:${gatewayip}:"                \
 168                         "${netmask}:${hostname}:${netdev}:off\0"        \
 169         "addmisc="                                                      \
 170                 "setenv bootargs ${bootargs} ${miscargs}\0"             \
 171         "addargs=run addcons addmisc\0"                                 \
 172         "mmcload="                                                      \
 173                 "mmc rescan ; "                                         \
 174                 "load mmc ${bootpart} ${kernel_addr_r} ${bootfile}\0"   \
 175         "netload="                                                      \
 176                 "tftp ${kernel_addr_r} ${hostname}/${bootfile}\0"       \
 177         "miscargs=nohlt panic=1\0"                                      \
 178         "mmcargs=setenv bootargs root=${rootdev} rw rootwait\0"         \
 179         "nfsargs="                                                      \
 180                 "setenv bootargs root=/dev/nfs rw "                     \
 181                         "nfsroot=${serverip}:${rootpath},v3,tcp\0"      \
 182         "mmc_mmc="                                                      \
 183                 "run mmcload mmcargs addargs ; "                        \
 184                 "bootm ${kernel_addr_r}\0"                              \
 185         "mmc_nfs="                                                      \
 186                 "run mmcload nfsargs addip addargs ; "                  \
 187                 "bootm ${kernel_addr_r}\0"                              \
 188         "net_mmc="                                                      \
 189                 "run netload mmcargs addargs ; "                        \
 190                 "bootm ${kernel_addr_r}\0"                              \
 191         "net_nfs="                                                      \
 192                 "run netload nfsargs addip addargs ; "                  \
 193                 "bootm ${kernel_addr_r}\0"                              \
 194         "try_bootscript="                                               \
 195                 "mmc rescan;"                                           \
 196                 "if test -e mmc ${bootpart} ${bootscript} ; then "      \
 197                 "if load mmc ${bootpart} ${kernel_addr_r} ${bootscript};"\
 198                 "then ; "                                               \
 199                         "echo Running bootscript... ; "                 \
 200                         "source ${kernel_addr_r} ; "                    \
 201                 "fi ; "                                                 \
 202                 "fi\0"
 203 /* SPL */
 204 #define CONFIG_SPL_FRAMEWORK
 205 #define CONFIG_SPL_TEXT_BASE            0x200000
 206 #define CONFIG_SPL_MAX_SIZE             0x10000
 207 #define CONFIG_SPL_BSS_START_ADDR       0x20000000
 208 #define CONFIG_SPL_BSS_MAX_SIZE         0x80000
 209 #define CONFIG_SYS_SPL_MALLOC_START     0x20080000
 210 #define CONFIG_SYS_SPL_MALLOC_SIZE      0x80000
 211
 212 #define CONFIG_SPL_BOARD_INIT
 213 #define CONFIG_SYS_MONITOR_LEN          (512 << 10)
 214
 215 #define CONFIG_SPL_SPI_LOAD
 216 #define CONFIG_SYS_SPI_U_BOOT_OFFS      0x10000
 217
 218 #endif  /* __MA5D4EVK_CONFIG_H__ */