Convert CONFIG_SPL_BOARD_INIT to Kconfig
[platform/kernel/u-boot.git] / include / configs / m53evk.h
1 /*
2  * Aries M53 configuration
3  * Copyright (C) 2012-2013 Marek Vasut <marex@denx.de>
4  *
5  * SPDX-License-Identifier:     GPL-2.0+
6  */
7
8 #ifndef __M53EVK_CONFIG_H__
9 #define __M53EVK_CONFIG_H__
10
11 #define CONFIG_MXC_GPIO
12
13 #include <asm/arch/imx-regs.h>
14
15 #define CONFIG_REVISION_TAG
16 #define CONFIG_SYS_FSL_CLK
17
18 #define CONFIG_TIMESTAMP                /* Print image info with timestamp */
19
20 /*
21  * U-Boot Commands
22  */
23 #define CONFIG_FAT_WRITE
24
25 #define CONFIG_CMD_NAND
26 #define CONFIG_CMD_NAND_TRIMFFS
27 #define CONFIG_CMD_SATA
28
29 /*
30  * Memory configurations
31  */
32 #define CONFIG_NR_DRAM_BANKS            2
33 #define PHYS_SDRAM_1                    CSD0_BASE_ADDR
34 #define PHYS_SDRAM_1_SIZE               (gd->bd->bi_dram[0].size)
35 #define PHYS_SDRAM_2                    CSD1_BASE_ADDR
36 #define PHYS_SDRAM_2_SIZE               (gd->bd->bi_dram[1].size)
37 #define PHYS_SDRAM_SIZE                 (gd->ram_size)
38 #define CONFIG_SYS_MALLOC_LEN           (10 * 1024 * 1024)
39 #define CONFIG_SYS_MEMTEST_START        0x70000000
40 #define CONFIG_SYS_MEMTEST_END          0x8ff00000
41
42 #define CONFIG_SYS_SDRAM_BASE           (PHYS_SDRAM_1)
43 #define CONFIG_SYS_INIT_RAM_ADDR        (IRAM_BASE_ADDR)
44 #define CONFIG_SYS_INIT_RAM_SIZE        (IRAM_SIZE)
45
46 #define CONFIG_SYS_INIT_SP_OFFSET \
47         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
48 #define CONFIG_SYS_INIT_SP_ADDR \
49         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
50
51 #define CONFIG_SYS_TEXT_BASE            0x71000000
52
53 /*
54  * U-Boot general configurations
55  */
56 #define CONFIG_SYS_LONGHELP
57 #define CONFIG_SYS_CBSIZE       1024            /* Console I/O buffer size */
58 #define CONFIG_SYS_PBSIZE       \
59         (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
60                                                 /* Print buffer size */
61 #define CONFIG_SYS_MAXARGS      32              /* Max number of command args */
62 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE
63                                                 /* Boot argument buffer size */
64 #define CONFIG_AUTO_COMPLETE                    /* Command auto complete */
65 #define CONFIG_CMDLINE_EDITING                  /* Command history etc */
66
67 /*
68  * Serial Driver
69  */
70 #define CONFIG_MXC_UART
71 #define CONFIG_MXC_UART_BASE            UART2_BASE
72 #define CONFIG_CONS_INDEX               1
73
74 /*
75  * MMC Driver
76  */
77 #ifdef CONFIG_CMD_MMC
78 #define CONFIG_FSL_ESDHC
79 #define CONFIG_SYS_FSL_ESDHC_ADDR       0
80 #define CONFIG_SYS_FSL_ESDHC_NUM        1
81 #endif
82
83 /*
84  * NAND
85  */
86 #define CONFIG_ENV_SIZE                 (16 * 1024)
87 #ifdef CONFIG_CMD_NAND
88 #define CONFIG_SYS_MAX_NAND_DEVICE      1
89 #define CONFIG_SYS_NAND_BASE            NFC_BASE_ADDR_AXI
90 #define CONFIG_NAND_MXC
91 #define CONFIG_MXC_NAND_REGS_BASE       NFC_BASE_ADDR_AXI
92 #define CONFIG_MXC_NAND_IP_REGS_BASE    NFC_BASE_ADDR
93 #define CONFIG_SYS_NAND_LARGEPAGE
94 #define CONFIG_MXC_NAND_HWECC
95 #define CONFIG_SYS_NAND_USE_FLASH_BBT
96
97 /* Environment is in NAND */
98 #define CONFIG_ENV_IS_IN_NAND
99 #define CONFIG_ENV_SIZE_REDUND          CONFIG_ENV_SIZE
100 #define CONFIG_ENV_SECT_SIZE            (128 * 1024)
101 #define CONFIG_ENV_RANGE                (4 * CONFIG_ENV_SECT_SIZE)
102 #define CONFIG_ENV_OFFSET               (8 * CONFIG_ENV_SECT_SIZE) /* 1 MiB */
103 #define CONFIG_ENV_OFFSET_REDUND        \
104                 (CONFIG_ENV_OFFSET + CONFIG_ENV_RANGE)
105
106 #define CONFIG_CMD_UBIFS
107 #define CONFIG_CMD_MTDPARTS
108 #define CONFIG_RBTREE
109 #define CONFIG_LZO
110 #define CONFIG_MTD_DEVICE
111 #define CONFIG_MTD_PARTITIONS
112 #define MTDIDS_DEFAULT                  "nand0=mxc_nand"
113 #define MTDPARTS_DEFAULT                        \
114         "mtdparts=mxc_nand:"                    \
115                 "1024k(u-boot),"                \
116                 "512k(env1),"                   \
117                 "512k(env2),"                   \
118                 "14m(boot),"                    \
119                 "240m(data),"                   \
120                 "-@2048k(UBI)"
121 #else
122 #define CONFIG_ENV_IS_NOWHERE
123 #endif
124
125 /*
126  * Ethernet on SOC (FEC)
127  */
128 #ifdef CONFIG_CMD_NET
129 #define CONFIG_FEC_MXC
130 #define IMX_FEC_BASE                    FEC_BASE_ADDR
131 #define CONFIG_FEC_MXC_PHYADDR          0x0
132 #define CONFIG_MII
133 #define CONFIG_DISCOVER_PHY
134 #define CONFIG_FEC_XCV_TYPE             RMII
135 #define CONFIG_PHYLIB
136 #define CONFIG_PHY_MICREL
137 #define CONFIG_ETHPRIME                 "FEC0"
138 #endif
139
140 /*
141  * I2C
142  */
143 #ifdef CONFIG_CMD_I2C
144 #define CONFIG_SYS_I2C
145 #define CONFIG_SYS_I2C_MXC
146 #define CONFIG_SYS_I2C_MXC_I2C1         /* enable I2C bus 1 */
147 #define CONFIG_SYS_I2C_MXC_I2C2         /* enable I2C bus 2 */
148 #define CONFIG_SYS_I2C_MXC_I2C3         /* enable I2C bus 3 */
149 #define CONFIG_SYS_RTC_BUS_NUM          1 /* I2C2 */
150 #endif
151
152 /*
153  * RTC
154  */
155 #ifdef CONFIG_CMD_DATE
156 #define CONFIG_RTC_M41T62
157 #define CONFIG_SYS_I2C_RTC_ADDR         0x68
158 #define CONFIG_SYS_M41T11_BASE_YEAR     2000
159 #endif
160
161 /*
162  * USB
163  */
164 #ifdef CONFIG_CMD_USB
165 #define CONFIG_USB_EHCI_MX5
166 #define CONFIG_USB_HOST_ETHER
167 #define CONFIG_USB_ETHER_ASIX
168 #define CONFIG_USB_ETHER_MCS7830
169 #define CONFIG_USB_ETHER_SMSC95XX
170 #define CONFIG_MXC_USB_PORT             1
171 #define CONFIG_MXC_USB_PORTSC           (PORT_PTS_UTMI | PORT_PTS_PTW)
172 #define CONFIG_MXC_USB_FLAGS            0
173 #endif
174
175 /*
176  * SATA
177  */
178 #ifdef CONFIG_CMD_SATA
179 #define CONFIG_DWC_AHSATA
180 #define CONFIG_SYS_SATA_MAX_DEVICE      1
181 #define CONFIG_DWC_AHSATA_PORT_ID       0
182 #define CONFIG_DWC_AHSATA_BASE_ADDR     SATA_BASE_ADDR
183 #define CONFIG_LBA48
184 #define CONFIG_LIBATA
185 #endif
186
187 /*
188  * LCD
189  */
190 #ifdef CONFIG_VIDEO
191 #define CONFIG_VIDEO_IPUV3
192 #define CONFIG_VIDEO_BMP_RLE8
193 #define CONFIG_VIDEO_BMP_GZIP
194 #define CONFIG_SPLASH_SCREEN
195 #define CONFIG_SPLASHIMAGE_GUARD
196 #define CONFIG_SPLASH_SCREEN_ALIGN
197 #define CONFIG_BMP_16BPP
198 #define CONFIG_VIDEO_LOGO
199 #define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE  (2 << 20)
200 #define CONFIG_IPUV3_CLK                200000000
201 #endif
202
203 /*
204  * Boot Linux
205  */
206 #define CONFIG_CMDLINE_TAG
207 #define CONFIG_INITRD_TAG
208 #define CONFIG_REVISION_TAG
209 #define CONFIG_SETUP_MEMORY_TAGS
210 #define CONFIG_BOOTFILE         "fitImage"
211 #define CONFIG_BOOTARGS         "console=ttymxc1,115200"
212 #define CONFIG_LOADADDR         0x70800000
213 #define CONFIG_BOOTCOMMAND      "run mmc_mmc"
214 #define CONFIG_SYS_LOAD_ADDR    CONFIG_LOADADDR
215
216 /*
217  * NAND SPL
218  */
219 #define CONFIG_SPL_FRAMEWORK
220 #define CONFIG_SPL_TARGET               "u-boot-with-nand-spl.imx"
221 #define CONFIG_SPL_TEXT_BASE            0x70008000
222 #define CONFIG_SPL_PAD_TO               0x8000
223 #define CONFIG_SPL_STACK                0x70004000
224
225 #define CONFIG_SYS_NAND_U_BOOT_OFFS     CONFIG_SPL_PAD_TO
226 #define CONFIG_SYS_NAND_PAGE_SIZE       2048
227 #define CONFIG_SYS_NAND_OOBSIZE         64
228 #define CONFIG_SYS_NAND_PAGE_COUNT      64
229 #define CONFIG_SYS_NAND_SIZE            (256 * 1024 * 1024)
230 #define CONFIG_SYS_NAND_BAD_BLOCK_POS   0
231
232 /*
233  * Extra Environments
234  */
235 #define CONFIG_PREBOOT          "run try_bootscript"
236 #define CONFIG_HOSTNAME         m53evk
237
238 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
239         "consdev=ttymxc1\0"                                             \
240         "baudrate=115200\0"                                             \
241         "bootscript=boot.scr\0"                                         \
242         "bootdev=/dev/mmcblk0p1\0"                                      \
243         "rootdev=/dev/mmcblk0p2\0"                                      \
244         "netdev=eth0\0"                                                 \
245         "rootpath=/opt/eldk-5.5/armv7a-hf/rootfs-qte-sdk\0"             \
246         "kernel_addr_r=0x72000000\0"                                    \
247         "addcons="                                                      \
248                 "setenv bootargs ${bootargs} "                          \
249                 "console=${consdev},${baudrate}\0"                      \
250         "addip="                                                        \
251                 "setenv bootargs ${bootargs} "                          \
252                 "ip=${ipaddr}:${serverip}:${gatewayip}:"                \
253                         "${netmask}:${hostname}:${netdev}:off\0"        \
254         "addmisc="                                                      \
255                 "setenv bootargs ${bootargs} ${miscargs}\0"             \
256         "adddfltmtd="                                                   \
257                 "if test \"x${mtdparts}\" == \"x\" ; then "             \
258                         "mtdparts default ; "                           \
259                 "fi\0"                                                  \
260         "addmtd="                                                       \
261                 "run adddfltmtd ; "                                     \
262                 "setenv bootargs ${bootargs} ${mtdparts}\0"             \
263         "addargs=run addcons addmtd addmisc\0"                          \
264         "mmcload="                                                      \
265                 "mmc rescan ; "                                         \
266                 "load mmc 0:1 ${kernel_addr_r} ${bootfile}\0"           \
267         "ubiload="                                                      \
268                 "ubi part UBI ; ubifsmount ubi0:rootfs ; "              \
269                 "ubifsload ${kernel_addr_r} /boot/${bootfile}\0"        \
270         "netload="                                                      \
271                 "tftp ${kernel_addr_r} ${hostname}/${bootfile}\0"       \
272         "miscargs=nohlt panic=1\0"                                      \
273         "mmcargs=setenv bootargs root=${rootdev} rw rootwait\0"         \
274         "ubiargs="                                                      \
275                 "setenv bootargs ubi.mtd=5 "                            \
276                 "root=ubi0:rootfs rootfstype=ubifs\0"                   \
277         "nfsargs="                                                      \
278                 "setenv bootargs root=/dev/nfs rw "                     \
279                         "nfsroot=${serverip}:${rootpath},v3,tcp\0"      \
280         "mmc_mmc="                                                      \
281                 "run mmcload mmcargs addargs ; "                        \
282                 "bootm ${kernel_addr_r}\0"                              \
283         "mmc_ubi="                                                      \
284                 "run mmcload ubiargs addargs ; "                        \
285                 "bootm ${kernel_addr_r}\0"                              \
286         "mmc_nfs="                                                      \
287                 "run mmcload nfsargs addip addargs ; "                  \
288                 "bootm ${kernel_addr_r}\0"                              \
289         "ubi_mmc="                                                      \
290                 "run ubiload mmcargs addargs ; "                        \
291                 "bootm ${kernel_addr_r}\0"                              \
292         "ubi_ubi="                                                      \
293                 "run ubiload ubiargs addargs ; "                        \
294                 "bootm ${kernel_addr_r}\0"                              \
295         "ubi_nfs="                                                      \
296                 "run ubiload nfsargs addip addargs ; "                  \
297                 "bootm ${kernel_addr_r}\0"                              \
298         "net_mmc="                                                      \
299                 "run netload mmcargs addargs ; "                        \
300                 "bootm ${kernel_addr_r}\0"                              \
301         "net_ubi="                                                      \
302                 "run netload ubiargs addargs ; "                        \
303                 "bootm ${kernel_addr_r}\0"                              \
304         "net_nfs="                                                      \
305                 "run netload nfsargs addip addargs ; "                  \
306                 "bootm ${kernel_addr_r}\0"                              \
307         "try_bootscript="                                               \
308                 "mmc rescan;"                                           \
309                 "if test -e mmc 0:1 ${bootscript} ; then "              \
310                 "if load mmc 0:1 ${kernel_addr_r} ${bootscript};"       \
311                 "then ; "                                               \
312                         "echo Running bootscript... ; "                 \
313                         "source ${kernel_addr_r} ; "                    \
314                 "fi ; "                                                 \
315                 "fi\0"
316
317 #endif  /* __M53EVK_CONFIG_H__ */