7e05bfd6b43424670e97bde9d9edf732da19dabf
[platform/kernel/u-boot.git] / include / configs / m53evk.h
1 /*
2  * DENX M53 configuration
3  * Copyright (C) 2012-2013 Marek Vasut <marex@denx.de>
4  *
5  * SPDX-License-Identifier:     GPL-2.0+
6  */
7
8 #ifndef __M53EVK_CONFIG_H__
9 #define __M53EVK_CONFIG_H__
10
11 #define CONFIG_MX53
12 #define CONFIG_MXC_GPIO
13
14 #include <asm/arch/imx-regs.h>
15
16 #define CONFIG_BOARD_EARLY_INIT_F
17 #define CONFIG_REVISION_TAG
18 #define CONFIG_SYS_NO_FLASH
19 #define CONFIG_SYS_FSL_CLK
20
21 #define CONFIG_TIMESTAMP                /* Print image info with timestamp */
22
23 /*
24  * U-Boot Commands
25  */
26 #define CONFIG_DOS_PARTITION
27 #define CONFIG_FAT_WRITE
28
29 #define CONFIG_CMD_BMP
30 #define CONFIG_CMD_DATE
31 #define CONFIG_CMD_NAND
32 #define CONFIG_CMD_NAND_TRIMFFS
33 #define CONFIG_CMD_SATA
34
35 /*
36  * Memory configurations
37  */
38 #define CONFIG_NR_DRAM_BANKS            2
39 #define PHYS_SDRAM_1                    CSD0_BASE_ADDR
40 #define PHYS_SDRAM_1_SIZE               (gd->bd->bi_dram[0].size)
41 #define PHYS_SDRAM_2                    CSD1_BASE_ADDR
42 #define PHYS_SDRAM_2_SIZE               (gd->bd->bi_dram[1].size)
43 #define PHYS_SDRAM_SIZE                 (gd->ram_size)
44 #define CONFIG_SYS_MALLOC_LEN           (10 * 1024 * 1024)
45 #define CONFIG_SYS_MEMTEST_START        0x70000000
46 #define CONFIG_SYS_MEMTEST_END          0x8ff00000
47
48 #define CONFIG_SYS_SDRAM_BASE           (PHYS_SDRAM_1)
49 #define CONFIG_SYS_INIT_RAM_ADDR        (IRAM_BASE_ADDR)
50 #define CONFIG_SYS_INIT_RAM_SIZE        (IRAM_SIZE)
51
52 #define CONFIG_SYS_INIT_SP_OFFSET \
53         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
54 #define CONFIG_SYS_INIT_SP_ADDR \
55         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
56
57 #define CONFIG_SYS_TEXT_BASE            0x71000000
58
59 /*
60  * U-Boot general configurations
61  */
62 #define CONFIG_SYS_LONGHELP
63 #define CONFIG_SYS_CBSIZE       1024            /* Console I/O buffer size */
64 #define CONFIG_SYS_PBSIZE       \
65         (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
66                                                 /* Print buffer size */
67 #define CONFIG_SYS_MAXARGS      32              /* Max number of command args */
68 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE
69                                                 /* Boot argument buffer size */
70 #define CONFIG_AUTO_COMPLETE                    /* Command auto complete */
71 #define CONFIG_CMDLINE_EDITING                  /* Command history etc */
72
73 /*
74  * Serial Driver
75  */
76 #define CONFIG_MXC_UART
77 #define CONFIG_MXC_UART_BASE            UART2_BASE
78 #define CONFIG_CONS_INDEX               1
79 #define CONFIG_BAUDRATE                 115200
80
81 /*
82  * MMC Driver
83  */
84 #ifdef CONFIG_CMD_MMC
85 #define CONFIG_MMC
86 #define CONFIG_GENERIC_MMC
87 #define CONFIG_FSL_ESDHC
88 #define CONFIG_SYS_FSL_ESDHC_ADDR       0
89 #define CONFIG_SYS_FSL_ESDHC_NUM        1
90 #endif
91
92 /*
93  * NAND
94  */
95 #define CONFIG_ENV_SIZE                 (16 * 1024)
96 #ifdef CONFIG_CMD_NAND
97 #define CONFIG_SYS_MAX_NAND_DEVICE      1
98 #define CONFIG_SYS_NAND_BASE            NFC_BASE_ADDR_AXI
99 #define CONFIG_NAND_MXC
100 #define CONFIG_MXC_NAND_REGS_BASE       NFC_BASE_ADDR_AXI
101 #define CONFIG_MXC_NAND_IP_REGS_BASE    NFC_BASE_ADDR
102 #define CONFIG_SYS_NAND_LARGEPAGE
103 #define CONFIG_MXC_NAND_HWECC
104 #define CONFIG_SYS_NAND_USE_FLASH_BBT
105
106 /* Environment is in NAND */
107 #define CONFIG_ENV_IS_IN_NAND
108 #define CONFIG_ENV_SIZE_REDUND          CONFIG_ENV_SIZE
109 #define CONFIG_ENV_SECT_SIZE            (128 * 1024)
110 #define CONFIG_ENV_RANGE                (4 * CONFIG_ENV_SECT_SIZE)
111 #define CONFIG_ENV_OFFSET               (8 * CONFIG_ENV_SECT_SIZE) /* 1 MiB */
112 #define CONFIG_ENV_OFFSET_REDUND        \
113                 (CONFIG_ENV_OFFSET + CONFIG_ENV_RANGE)
114
115 #define CONFIG_CMD_UBIFS
116 #define CONFIG_CMD_MTDPARTS
117 #define CONFIG_RBTREE
118 #define CONFIG_LZO
119 #define CONFIG_MTD_DEVICE
120 #define CONFIG_MTD_PARTITIONS
121 #define MTDIDS_DEFAULT                  "nand0=mxc_nand"
122 #define MTDPARTS_DEFAULT                        \
123         "mtdparts=mxc_nand:"                    \
124                 "1024k(u-boot),"                \
125                 "512k(env1),"                   \
126                 "512k(env2),"                   \
127                 "14m(boot),"                    \
128                 "240m(data),"                   \
129                 "-@2048k(UBI)"
130 #else
131 #define CONFIG_ENV_IS_NOWHERE
132 #endif
133
134 /*
135  * Ethernet on SOC (FEC)
136  */
137 #ifdef CONFIG_CMD_NET
138 #define CONFIG_FEC_MXC
139 #define IMX_FEC_BASE                    FEC_BASE_ADDR
140 #define CONFIG_FEC_MXC_PHYADDR          0x0
141 #define CONFIG_MII
142 #define CONFIG_DISCOVER_PHY
143 #define CONFIG_FEC_XCV_TYPE             RMII
144 #define CONFIG_PHYLIB
145 #define CONFIG_PHY_MICREL
146 #define CONFIG_ETHPRIME                 "FEC0"
147 #endif
148
149 /*
150  * I2C
151  */
152 #ifdef CONFIG_CMD_I2C
153 #define CONFIG_SYS_I2C
154 #define CONFIG_SYS_I2C_MXC
155 #define CONFIG_SYS_I2C_MXC_I2C1         /* enable I2C bus 1 */
156 #define CONFIG_SYS_I2C_MXC_I2C2         /* enable I2C bus 2 */
157 #define CONFIG_SYS_I2C_MXC_I2C3         /* enable I2C bus 3 */
158 #define CONFIG_SYS_RTC_BUS_NUM          1 /* I2C2 */
159 #endif
160
161 /*
162  * RTC
163  */
164 #ifdef CONFIG_CMD_DATE
165 #define CONFIG_RTC_M41T62
166 #define CONFIG_SYS_I2C_RTC_ADDR         0x68
167 #define CONFIG_SYS_M41T11_BASE_YEAR     2000
168 #endif
169
170 /*
171  * USB
172  */
173 #ifdef CONFIG_CMD_USB
174 #define CONFIG_USB_EHCI
175 #define CONFIG_USB_EHCI_MX5
176 #define CONFIG_USB_HOST_ETHER
177 #define CONFIG_USB_ETHER_ASIX
178 #define CONFIG_USB_ETHER_MCS7830
179 #define CONFIG_USB_ETHER_SMSC95XX
180 #define CONFIG_MXC_USB_PORT             1
181 #define CONFIG_MXC_USB_PORTSC           (PORT_PTS_UTMI | PORT_PTS_PTW)
182 #define CONFIG_MXC_USB_FLAGS            0
183 #endif
184
185 /*
186  * SATA
187  */
188 #ifdef CONFIG_CMD_SATA
189 #define CONFIG_DWC_AHSATA
190 #define CONFIG_SYS_SATA_MAX_DEVICE      1
191 #define CONFIG_DWC_AHSATA_PORT_ID       0
192 #define CONFIG_DWC_AHSATA_BASE_ADDR     SATA_BASE_ADDR
193 #define CONFIG_LBA48
194 #define CONFIG_LIBATA
195 #endif
196
197 /*
198  * LCD
199  */
200 #ifdef CONFIG_VIDEO
201 #define CONFIG_VIDEO_IPUV3
202 #define CONFIG_VIDEO_BMP_RLE8
203 #define CONFIG_VIDEO_BMP_GZIP
204 #define CONFIG_SPLASH_SCREEN
205 #define CONFIG_SPLASHIMAGE_GUARD
206 #define CONFIG_SPLASH_SCREEN_ALIGN
207 #define CONFIG_BMP_16BPP
208 #define CONFIG_VIDEO_LOGO
209 #define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE  (2 << 20)
210 #define CONFIG_IPUV3_CLK                200000000
211 #endif
212
213 /*
214  * Boot Linux
215  */
216 #define CONFIG_CMDLINE_TAG
217 #define CONFIG_INITRD_TAG
218 #define CONFIG_REVISION_TAG
219 #define CONFIG_SETUP_MEMORY_TAGS
220 #define CONFIG_BOOTFILE         "fitImage"
221 #define CONFIG_BOOTARGS         "console=ttymxc1,115200"
222 #define CONFIG_LOADADDR         0x70800000
223 #define CONFIG_BOOTCOMMAND      "run mmc_mmc"
224 #define CONFIG_SYS_LOAD_ADDR    CONFIG_LOADADDR
225
226 /*
227  * NAND SPL
228  */
229 #define CONFIG_SPL_FRAMEWORK
230 #define CONFIG_SPL_TARGET               "u-boot-with-nand-spl.imx"
231 #define CONFIG_SPL_BOARD_INIT
232 #define CONFIG_SPL_TEXT_BASE            0x70008000
233 #define CONFIG_SPL_PAD_TO               0x8000
234 #define CONFIG_SPL_STACK                0x70004000
235
236 #define CONFIG_SYS_NAND_U_BOOT_OFFS     CONFIG_SPL_PAD_TO
237 #define CONFIG_SYS_NAND_PAGE_SIZE       2048
238 #define CONFIG_SYS_NAND_OOBSIZE         64
239 #define CONFIG_SYS_NAND_PAGE_COUNT      64
240 #define CONFIG_SYS_NAND_SIZE            (256 * 1024 * 1024)
241 #define CONFIG_SYS_NAND_BAD_BLOCK_POS   0
242
243 /*
244  * Extra Environments
245  */
246 #define CONFIG_PREBOOT          "run try_bootscript"
247 #define CONFIG_HOSTNAME         m53evk
248
249 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
250         "consdev=ttymxc1\0"                                             \
251         "baudrate=115200\0"                                             \
252         "bootscript=boot.scr\0"                                         \
253         "bootdev=/dev/mmcblk0p1\0"                                      \
254         "rootdev=/dev/mmcblk0p2\0"                                      \
255         "netdev=eth0\0"                                                 \
256         "rootpath=/opt/eldk-5.5/armv7a-hf/rootfs-qte-sdk\0"             \
257         "kernel_addr_r=0x72000000\0"                                    \
258         "addcons="                                                      \
259                 "setenv bootargs ${bootargs} "                          \
260                 "console=${consdev},${baudrate}\0"                      \
261         "addip="                                                        \
262                 "setenv bootargs ${bootargs} "                          \
263                 "ip=${ipaddr}:${serverip}:${gatewayip}:"                \
264                         "${netmask}:${hostname}:${netdev}:off\0"        \
265         "addmisc="                                                      \
266                 "setenv bootargs ${bootargs} ${miscargs}\0"             \
267         "adddfltmtd="                                                   \
268                 "if test \"x${mtdparts}\" == \"x\" ; then "             \
269                         "mtdparts default ; "                           \
270                 "fi\0"                                                  \
271         "addmtd="                                                       \
272                 "run adddfltmtd ; "                                     \
273                 "setenv bootargs ${bootargs} ${mtdparts}\0"             \
274         "addargs=run addcons addmtd addmisc\0"                          \
275         "mmcload="                                                      \
276                 "mmc rescan ; "                                         \
277                 "load mmc 0:1 ${kernel_addr_r} ${bootfile}\0"           \
278         "ubiload="                                                      \
279                 "ubi part UBI ; ubifsmount ubi0:rootfs ; "              \
280                 "ubifsload ${kernel_addr_r} /boot/${bootfile}\0"        \
281         "netload="                                                      \
282                 "tftp ${kernel_addr_r} ${hostname}/${bootfile}\0"       \
283         "miscargs=nohlt panic=1\0"                                      \
284         "mmcargs=setenv bootargs root=${rootdev} rw rootwait\0"         \
285         "ubiargs="                                                      \
286                 "setenv bootargs ubi.mtd=5 "                            \
287                 "root=ubi0:rootfs rootfstype=ubifs\0"                   \
288         "nfsargs="                                                      \
289                 "setenv bootargs root=/dev/nfs rw "                     \
290                         "nfsroot=${serverip}:${rootpath},v3,tcp\0"      \
291         "mmc_mmc="                                                      \
292                 "run mmcload mmcargs addargs ; "                        \
293                 "bootm ${kernel_addr_r}\0"                              \
294         "mmc_ubi="                                                      \
295                 "run mmcload ubiargs addargs ; "                        \
296                 "bootm ${kernel_addr_r}\0"                              \
297         "mmc_nfs="                                                      \
298                 "run mmcload nfsargs addip addargs ; "                  \
299                 "bootm ${kernel_addr_r}\0"                              \
300         "ubi_mmc="                                                      \
301                 "run ubiload mmcargs addargs ; "                        \
302                 "bootm ${kernel_addr_r}\0"                              \
303         "ubi_ubi="                                                      \
304                 "run ubiload ubiargs addargs ; "                        \
305                 "bootm ${kernel_addr_r}\0"                              \
306         "ubi_nfs="                                                      \
307                 "run ubiload nfsargs addip addargs ; "                  \
308                 "bootm ${kernel_addr_r}\0"                              \
309         "net_mmc="                                                      \
310                 "run netload mmcargs addargs ; "                        \
311                 "bootm ${kernel_addr_r}\0"                              \
312         "net_ubi="                                                      \
313                 "run netload ubiargs addargs ; "                        \
314                 "bootm ${kernel_addr_r}\0"                              \
315         "net_nfs="                                                      \
316                 "run netload nfsargs addip addargs ; "                  \
317                 "bootm ${kernel_addr_r}\0"                              \
318         "try_bootscript="                                               \
319                 "mmc rescan;"                                           \
320                 "if test -e mmc 0:1 ${bootscript} ; then "              \
321                 "if load mmc 0:1 ${kernel_addr_r} ${bootscript};"       \
322                 "then ; "                                               \
323                         "echo Running bootscript... ; "                 \
324                         "source ${kernel_addr_r} ; "                    \
325                 "fi ; "                                                 \
326                 "fi\0"
327
328 #endif  /* __M53EVK_CONFIG_H__ */