include/configs/lsxl.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright (c) 2012 Michael Walle
   4  * Michael Walle <michael@walle.cc>
   5  */
   6
   7 #ifndef _CONFIG_LSXL_H
   8 #define _CONFIG_LSXL_H
   9
  10 /*
  11  * Version number information
  12  */
  13 #if defined(CONFIG_LSCHLV2)
  14 #define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage-lschl.cfg
  15 #define CONFIG_MACH_TYPE 3006
  16 #define CONFIG_SYS_TCLK 166666667 /* 166 MHz */
  17 #elif defined(CONFIG_LSXHL)
  18 #define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage-lsxhl.cfg
  19 #define CONFIG_MACH_TYPE 2663
  20 /* CONFIG_SYS_TCLK is 200000000 by default */
  21 #else
  22 #error "unknown board"
  23 #endif
  24
  25 /*
  26  * General configuration options
  27  */
  28 #define CONFIG_FEROCEON_88FR131         /* CPU Core subversion */
  29 #define CONFIG_KW88F6281                /* SOC Name */
  30
  31 #define CONFIG_SKIP_LOWLEVEL_INIT       /* disable board lowlevel_init */
  32
  33 #define CONFIG_KIRKWOOD_GPIO
  34
  35 /*
  36  * Commands configuration
  37  */
  38
  39 /*
  40  * mv-common.h should be defined after CMD configs since it used them
  41  * to enable certain macros
  42  */
  43 #include "mv-common.h"
  44
  45 /* loading initramfs images without uimage header */
  46
  47 /*
  48  *  Environment variables configurations
  49  */
  50 #ifdef CONFIG_SPI_FLASH
  51 #define CONFIG_SYS_MAX_FLASH_BANKS      1
  52 #define CONFIG_SYS_MAX_FLASH_SECT       8
  53 #endif
  54
  55 /*
  56  * Default environment variables
  57  */
  58 #define CONFIG_LOADADDR         0x00800000
  59
  60 #if defined(CONFIG_LSXHL)
  61 #define CONFIG_FDTFILE "kirkwood-lsxhl.dtb"
  62 #elif defined(CONFIG_LSCHLV2)
  63 #define CONFIG_FDTFILE "kirkwood-lschlv2.dtb"
  64 #else
  65 #error "Unsupported board"
  66 #endif
  67
  68 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
  69         "bootsource=legacy\0"                                           \
  70         "hdpart=0:1\0"                                                  \
  71         "kernel_addr=0x00800000\0"                                      \
  72         "ramdisk_addr=0x01000000\0"                                     \
  73         "fdt_addr=0x00ff0000\0"                                         \
  74         "bootcmd_legacy=sata init "                                     \
  75                 "&& load sata ${hdpart} ${kernel_addr} /uImage.buffalo "\
  76                 "&& load sata ${hdpart} ${ramdisk_addr} /initrd.buffalo "\
  77                 "&& bootm ${kernel_addr} ${ramdisk_addr}\0"             \
  78         "bootcmd_net=bootp ${kernel_addr} vmlinuz "                     \
  79                 "&& tftpboot ${ramdisk_addr} initrd.img "               \
  80                 "&& setenv ramdisk_len ${filesize} "                    \
  81                 "&& tftpboot ${fdt_addr} " CONFIG_FDTFILE " "           \
  82                 "&& bootz ${kernel_addr} "                              \
  83                         "${ramdisk_addr}:${ramdisk_len} ${fdt_addr}\0"  \
  84         "bootcmd_hdd=sata init "                                        \
  85                 "&& load sata ${hdpart} ${kernel_addr} /vmlinuz "       \
  86                 "&& load sata ${hdpart} ${ramdisk_addr} /initrd.img "   \
  87                 "&& setenv ramdisk_len ${filesize} "                    \
  88                 "&& load sata ${hdpart} ${fdt_addr} /dtb "              \
  89                 "&& bootz ${kernel_addr} "                              \
  90                         "${ramdisk_addr}:${ramdisk_len} ${fdt_addr}\0"  \
  91         "bootcmd_usb=usb start "                                        \
  92                 "&& load usb 0:1 ${kernel_addr} /vmlinuz "              \
  93                 "&& load usb 0:1 ${ramdisk_addr} /initrd.img "          \
  94                 "&& setenv ramdisk_len ${filesize} "                    \
  95                 "&& load usb 0:1 ${fdt_addr} " CONFIG_FDTFILE " "       \
  96                 "&& bootz ${kernel_addr} "                              \
  97                         "${ramdisk_addr}:${ramdisk_len} ${fdt_addr}\0"  \
  98         "bootcmd_rescue=run config_nc_dhcp; run nc\0"                   \
  99         "eraseenv=sf probe 0 "                                          \
 100                 "&& sf erase " __stringify(CONFIG_ENV_OFFSET)           \
 101                         " +" __stringify(CONFIG_ENV_SIZE) "\0"          \
 102         "config_nc_dhcp=setenv autoload_old ${autoload}; "              \
 103                 "setenv autoload no "                                   \
 104                 "&& bootp "                                             \
 105                 "&& setenv ncip "                                       \
 106                 "&& setenv autoload ${autoload_old}; "                  \
 107                 "setenv autoload_old\0"                                 \
 108         "standard_env=setenv ipaddr; setenv netmask; setenv serverip; " \
 109                 "setenv ncip; setenv gatewayip; setenv ethact; "        \
 110                 "setenv bootfile; setenv dnsip; "                       \
 111                 "setenv bootsource legacy; run ser\0"                   \
 112         "restore_env=run standard_env; saveenv; reset\0"                \
 113         "ser=setenv stdin serial; setenv stdout serial; "               \
 114                 "setenv stderr serial\0"                                \
 115         "nc=setenv stdin nc; setenv stdout nc; setenv stderr nc\0"      \
 116         "stdin=serial\0"                                                \
 117         "stdout=serial\0"                                               \
 118         "stderr=serial\0"
 119
 120 /*
 121  * Ethernet Driver configuration
 122  */
 123 #ifdef CONFIG_CMD_NET
 124 #define CONFIG_MVGBE_PORTS              {0, 1} /* enable port 1 only */
 125 #define CONFIG_PHY_BASE_ADR             7
 126 #undef CONFIG_RESET_PHY_R
 127 #endif /* CONFIG_CMD_NET */
 128
 129 #ifdef CONFIG_SATA
 130 #define CONFIG_SYS_SATA_MAX_DEVICE 1
 131 #define CONFIG_SYS_64BIT_LBA
 132 #define CONFIG_LBA48
 133 #endif
 134
 135 #endif /* _CONFIG_LSXL_H */