include/configs/ls2080ardb.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright 2017, 2019-2021 NXP
   4  * Copyright 2015 Freescale Semiconductor
   5  */
   6
   7 #ifndef __LS2_RDB_H
   8 #define __LS2_RDB_H
   9
  10 #include "ls2080a_common.h"
  11
  12 #define I2C_MUX_CH_VOL_MONITOR          0xa
  13 #define I2C_VOL_MONITOR_ADDR            0x38
  14
  15 /* step the IR regulator in 5mV increments */
  16 #define IR_VDD_STEP_DOWN                5
  17 #define IR_VDD_STEP_UP                  5
  18 /* The lowest and highest voltage allowed for LS2080ARDB */
  19 #define VDD_MV_MIN                      819
  20 #define VDD_MV_MAX                      1212
  21
  22 #define COUNTER_FREQUENCY_REAL          (get_board_sys_clk()/4)
  23
  24 #define CONFIG_MEM_INIT_VALUE           0xdeadbeef
  25 #define SPD_EEPROM_ADDRESS1     0x51
  26 #define SPD_EEPROM_ADDRESS2     0x52
  27 #define SPD_EEPROM_ADDRESS3     0x53
  28 #define SPD_EEPROM_ADDRESS4     0x54
  29 #define SPD_EEPROM_ADDRESS5     0x55
  30 #define SPD_EEPROM_ADDRESS6     0x56    /* dummy address */
  31 #define SPD_EEPROM_ADDRESS      SPD_EEPROM_ADDRESS1
  32
  33 #if !defined(CONFIG_FSL_QSPI) || defined(CONFIG_TFABOOT)
  34
  35 #define CONFIG_SYS_NOR0_CSPR_EXT        (0x0)
  36 #define CONFIG_SYS_NOR_AMASK            IFC_AMASK(128*1024*1024)
  37 #define CONFIG_SYS_NOR_AMASK_EARLY      IFC_AMASK(64*1024*1024)
  38
  39 #define CONFIG_SYS_NOR0_CSPR                                    \
  40         (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS)             | \
  41         CSPR_PORT_SIZE_16                                       | \
  42         CSPR_MSEL_NOR                                           | \
  43         CSPR_V)
  44 #define CONFIG_SYS_NOR0_CSPR_EARLY                              \
  45         (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS_EARLY)       | \
  46         CSPR_PORT_SIZE_16                                       | \
  47         CSPR_MSEL_NOR                                           | \
  48         CSPR_V)
  49 #define CONFIG_SYS_NOR_CSOR     CSOR_NOR_ADM_SHIFT(12)
  50 #define CONFIG_SYS_NOR_FTIM0    (FTIM0_NOR_TACSE(0x4) | \
  51                                 FTIM0_NOR_TEADC(0x5) | \
  52                                 FTIM0_NOR_TEAHC(0x5))
  53 #define CONFIG_SYS_NOR_FTIM1    (FTIM1_NOR_TACO(0x35) | \
  54                                 FTIM1_NOR_TRAD_NOR(0x1a) |\
  55                                 FTIM1_NOR_TSEQRAD_NOR(0x13))
  56 #define CONFIG_SYS_NOR_FTIM2    (FTIM2_NOR_TCS(0x4) | \
  57                                 FTIM2_NOR_TCH(0x4) | \
  58                                 FTIM2_NOR_TWPH(0x0E) | \
  59                                 FTIM2_NOR_TWP(0x1c))
  60 #define CONFIG_SYS_NOR_FTIM3    0x04000000
  61 #define CONFIG_SYS_IFC_CCR      0x01000000
  62
  63 #ifdef CONFIG_MTD_NOR_FLASH
  64 #define CONFIG_SYS_FLASH_QUIET_TEST
  65 #define CONFIG_FLASH_SHOW_PROGRESS      45 /* count down from 45/5: 9..1 */
  66
  67 #define CONFIG_SYS_MAX_FLASH_SECT       1024    /* sectors per device */
  68 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000   /* Flash Erase Timeout (ms) */
  69 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Flash Write Timeout (ms) */
  70
  71 #define CONFIG_SYS_FLASH_BANKS_LIST     { CONFIG_SYS_FLASH_BASE,\
  72                                          CONFIG_SYS_FLASH_BASE + 0x40000000}
  73 #endif
  74
  75 #define CONFIG_SYS_NAND_MAX_ECCPOS      256
  76 #define CONFIG_SYS_NAND_MAX_OOBFREE     2
  77
  78 #define CONFIG_SYS_NAND_CSPR_EXT        (0x0)
  79 #define CONFIG_SYS_NAND_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
  80                                 | CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \
  81                                 | CSPR_MSEL_NAND        /* MSEL = NAND */ \
  82                                 | CSPR_V)
  83 #define CONFIG_SYS_NAND_AMASK   IFC_AMASK(64 * 1024)
  84
  85 #define CONFIG_SYS_NAND_CSOR    (CSOR_NAND_ECC_ENC_EN   /* ECC on encode */ \
  86                                 | CSOR_NAND_ECC_DEC_EN  /* ECC on decode */ \
  87                                 | CSOR_NAND_ECC_MODE_4  /* 4-bit ECC */ \
  88                                 | CSOR_NAND_RAL_3       /* RAL = 3Byes */ \
  89                                 | CSOR_NAND_PGS_4K      /* Page Size = 4K */ \
  90                                 | CSOR_NAND_SPRZ_224    /* Spare size = 224 */ \
  91                                 | CSOR_NAND_PB(128))    /* Pages Per Block 128*/
  92
  93 /* ONFI NAND Flash mode0 Timing Params */
  94 #define CONFIG_SYS_NAND_FTIM0           (FTIM0_NAND_TCCST(0x0e) | \
  95                                         FTIM0_NAND_TWP(0x30)   | \
  96                                         FTIM0_NAND_TWCHT(0x0e) | \
  97                                         FTIM0_NAND_TWH(0x14))
  98 #define CONFIG_SYS_NAND_FTIM1           (FTIM1_NAND_TADLE(0x64) | \
  99                                         FTIM1_NAND_TWBE(0xab)  | \
 100                                         FTIM1_NAND_TRR(0x1c)   | \
 101                                         FTIM1_NAND_TRP(0x30))
 102 #define CONFIG_SYS_NAND_FTIM2           (FTIM2_NAND_TRAD(0x1e) | \
 103                                         FTIM2_NAND_TREH(0x14) | \
 104                                         FTIM2_NAND_TWHRE(0x3c))
 105 #define CONFIG_SYS_NAND_FTIM3           0x0
 106
 107 #define CONFIG_SYS_NAND_BASE_LIST       { CONFIG_SYS_NAND_BASE }
 108 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 109 #define CONFIG_MTD_NAND_VERIFY_WRITE
 110
 111 #define QIXIS_LBMAP_SWITCH              0x06
 112 #define QIXIS_LBMAP_MASK                0x0f
 113 #define QIXIS_LBMAP_SHIFT               0
 114 #define QIXIS_LBMAP_DFLTBANK            0x00
 115 #define QIXIS_LBMAP_ALTBANK             0x04
 116 #define QIXIS_LBMAP_NAND                0x09
 117 #define QIXIS_RST_CTL_RESET             0x31
 118 #define QIXIS_RST_CTL_RESET_EN          0x30
 119 #define QIXIS_RCFG_CTL_RECONFIG_IDLE    0x20
 120 #define QIXIS_RCFG_CTL_RECONFIG_START   0x21
 121 #define QIXIS_RCFG_CTL_WATCHDOG_ENBLE   0x08
 122 #define QIXIS_RCW_SRC_NAND              0x119
 123 #define QIXIS_RST_FORCE_MEM             0x01
 124
 125 #define CONFIG_SYS_CSPR3_EXT    (0x0)
 126 #define CONFIG_SYS_CSPR3        (CSPR_PHYS_ADDR(QIXIS_BASE_PHYS_EARLY) \
 127                                 | CSPR_PORT_SIZE_8 \
 128                                 | CSPR_MSEL_GPCM \
 129                                 | CSPR_V)
 130 #define CONFIG_SYS_CSPR3_FINAL  (CSPR_PHYS_ADDR(QIXIS_BASE_PHYS) \
 131                                 | CSPR_PORT_SIZE_8 \
 132                                 | CSPR_MSEL_GPCM \
 133                                 | CSPR_V)
 134
 135 #define CONFIG_SYS_AMASK3       IFC_AMASK(64*1024)
 136 #define CONFIG_SYS_CSOR3        CSOR_GPCM_ADM_SHIFT(12)
 137 /* QIXIS Timing parameters for IFC CS3 */
 138 #define CONFIG_SYS_CS3_FTIM0            (FTIM0_GPCM_TACSE(0x0e) | \
 139                                         FTIM0_GPCM_TEADC(0x0e) | \
 140                                         FTIM0_GPCM_TEAHC(0x0e))
 141 #define CONFIG_SYS_CS3_FTIM1            (FTIM1_GPCM_TACO(0xff) | \
 142                                         FTIM1_GPCM_TRAD(0x3f))
 143 #define CONFIG_SYS_CS3_FTIM2            (FTIM2_GPCM_TCS(0xf) | \
 144                                         FTIM2_GPCM_TCH(0xf) | \
 145                                         FTIM2_GPCM_TWP(0x3E))
 146 #define CONFIG_SYS_CS3_FTIM3            0x0
 147
 148 #if defined(CONFIG_SPL) && defined(CONFIG_MTD_RAW_NAND)
 149 #define CONFIG_SYS_CSPR2_EXT            CONFIG_SYS_NOR0_CSPR_EXT
 150 #define CONFIG_SYS_CSPR2                CONFIG_SYS_NOR0_CSPR_EARLY
 151 #define CONFIG_SYS_CSPR2_FINAL          CONFIG_SYS_NOR0_CSPR
 152 #define CONFIG_SYS_AMASK2               CONFIG_SYS_NOR_AMASK
 153 #define CONFIG_SYS_CSOR2                CONFIG_SYS_NOR_CSOR
 154 #define CONFIG_SYS_CS2_FTIM0            CONFIG_SYS_NOR_FTIM0
 155 #define CONFIG_SYS_CS2_FTIM1            CONFIG_SYS_NOR_FTIM1
 156 #define CONFIG_SYS_CS2_FTIM2            CONFIG_SYS_NOR_FTIM2
 157 #define CONFIG_SYS_CS2_FTIM3            CONFIG_SYS_NOR_FTIM3
 158 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NAND_CSPR_EXT
 159 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NAND_CSPR
 160 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NAND_AMASK
 161 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NAND_CSOR
 162 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NAND_FTIM0
 163 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NAND_FTIM1
 164 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NAND_FTIM2
 165 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NAND_FTIM3
 166
 167 #define CONFIG_SYS_NAND_U_BOOT_SIZE     (512 * 1024)
 168 #else
 169 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NOR0_CSPR_EXT
 170 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NOR0_CSPR_EARLY
 171 #define CONFIG_SYS_CSPR0_FINAL          CONFIG_SYS_NOR0_CSPR
 172 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NOR_AMASK
 173 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NOR_CSOR
 174 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NOR_FTIM0
 175 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NOR_FTIM1
 176 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NOR_FTIM2
 177 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NOR_FTIM3
 178 #define CONFIG_SYS_CSPR2_EXT            CONFIG_SYS_NAND_CSPR_EXT
 179 #define CONFIG_SYS_CSPR2                CONFIG_SYS_NAND_CSPR
 180 #define CONFIG_SYS_AMASK2               CONFIG_SYS_NAND_AMASK
 181 #define CONFIG_SYS_CSOR2                CONFIG_SYS_NAND_CSOR
 182 #define CONFIG_SYS_CS2_FTIM0            CONFIG_SYS_NAND_FTIM0
 183 #define CONFIG_SYS_CS2_FTIM1            CONFIG_SYS_NAND_FTIM1
 184 #define CONFIG_SYS_CS2_FTIM2            CONFIG_SYS_NAND_FTIM2
 185 #define CONFIG_SYS_CS2_FTIM3            CONFIG_SYS_NAND_FTIM3
 186 #endif
 187
 188 /* Debug Server firmware */
 189 #define CONFIG_SYS_DEBUG_SERVER_FW_IN_NOR
 190 #define CONFIG_SYS_DEBUG_SERVER_FW_ADDR 0x580D00000ULL
 191 #endif
 192 #define CONFIG_SYS_LS_MC_BOOT_TIMEOUT_MS 5000
 193
 194 #ifdef CONFIG_TARGET_LS2081ARDB
 195 #define QIXIS_QMAP_MASK                 0x07
 196 #define QIXIS_QMAP_SHIFT                5
 197 #define QIXIS_LBMAP_DFLTBANK            0x00
 198 #define QIXIS_LBMAP_QSPI                0x00
 199 #define QIXIS_RCW_SRC_QSPI              0x62
 200 #define QIXIS_LBMAP_ALTBANK             0x20
 201 #define QIXIS_RST_CTL_RESET             0x31
 202 #define QIXIS_RCFG_CTL_RECONFIG_IDLE    0x20
 203 #define QIXIS_RCFG_CTL_RECONFIG_START   0x21
 204 #define QIXIS_RCFG_CTL_WATCHDOG_ENBLE   0x08
 205 #define QIXIS_LBMAP_MASK                0x0f
 206 #define QIXIS_RST_CTL_RESET_EN          0x30
 207 #endif
 208
 209 /*
 210  * I2C
 211  */
 212 #ifdef CONFIG_TARGET_LS2081ARDB
 213 #define CONFIG_SYS_I2C_FPGA_ADDR        0x66
 214 #endif
 215 #define I2C_MUX_PCA_ADDR                0x75
 216 #define I2C_MUX_PCA_ADDR_PRI            0x75 /* Primary Mux*/
 217
 218 /* I2C bus multiplexer */
 219 #define I2C_MUX_CH_DEFAULT      0x8
 220
 221 /* SPI */
 222
 223 /*
 224  * RTC configuration
 225  */
 226 #define RTC
 227 #ifdef CONFIG_TARGET_LS2081ARDB
 228 #define CONFIG_SYS_I2C_RTC_ADDR         0x51
 229 #else
 230 #define CONFIG_RTC_DS3231               1
 231 #define CONFIG_SYS_I2C_RTC_ADDR         0x68
 232 #endif
 233
 234 /* EEPROM */
 235 #define CONFIG_SYS_I2C_EEPROM_NXID
 236 #define CONFIG_SYS_EEPROM_BUS_NUM       0
 237
 238 #define CONFIG_FSL_MEMAC
 239
 240 #define BOOT_TARGET_DEVICES(func) \
 241         func(USB, usb, 0) \
 242         func(MMC, mmc, 0) \
 243         func(SCSI, scsi, 0) \
 244         func(DHCP, dhcp, na)
 245 #include <config_distro_bootcmd.h>
 246
 247 #ifdef CONFIG_TFABOOT
 248 #define QSPI_MC_INIT_CMD                                \
 249         "sf probe 0:0; "                                \
 250         "sf read 0x80640000 0x640000 0x80000; "         \
 251         "env exists secureboot && "                     \
 252         "esbc_validate 0x80640000 && "                  \
 253         "esbc_validate 0x80680000; "                    \
 254         "sf read 0x80a00000 0xa00000 0x200000; "        \
 255         "sf read 0x80e00000 0xe00000 0x100000; "        \
 256         "fsl_mc start mc 0x80a00000 0x80e00000 \0"
 257 #define SD_MC_INIT_CMD                          \
 258         "mmcinfo;mmc read 0x80a00000 0x5000 0x1000;" \
 259         "mmc read 0x80e00000 0x7000 0x800;"     \
 260         "env exists secureboot && "             \
 261         "mmc read 0x80640000 0x3200 0x20 && "   \
 262         "mmc read 0x80680000 0x3400 0x20 && "   \
 263         "esbc_validate 0x80640000 && "          \
 264         "esbc_validate 0x80680000 ;"            \
 265         "fsl_mc start mc 0x80a00000 0x80e00000\0"
 266 #define IFC_MC_INIT_CMD                         \
 267         "env exists secureboot && "     \
 268         "esbc_validate 0x580640000 && "         \
 269         "esbc_validate 0x580680000; "           \
 270         "fsl_mc start mc 0x580a00000 0x580e00000 \0"
 271 #else
 272 #ifdef CONFIG_QSPI_BOOT
 273 #define MC_INIT_CMD                                     \
 274         "mcinitcmd=sf probe 0:0; "                      \
 275         "sf read 0x80640000 0x640000 0x80000; "         \
 276         "env exists secureboot && "                     \
 277         "esbc_validate 0x80640000 && "                  \
 278         "esbc_validate 0x80680000; "                    \
 279         "sf read 0x80a00000 0xa00000 0x200000; "        \
 280         "sf read 0x80e00000 0xe00000 0x100000; "        \
 281         "fsl_mc start mc 0x80a00000 0x80e00000 \0"
 282 #elif defined(CONFIG_SD_BOOT)
 283 #define MC_INIT_CMD                             \
 284         "mcinitcmd=mmcinfo;mmc read 0x80a00000 0x5000 0x1000;" \
 285         "mmc read 0x80e00000 0x7000 0x800;"     \
 286         "env exists secureboot && "             \
 287         "mmc read 0x80640000 0x3200 0x20 && "   \
 288         "mmc read 0x80680000 0x3400 0x20 && "   \
 289         "esbc_validate 0x80640000 && "          \
 290         "esbc_validate 0x80680000 ;"            \
 291         "fsl_mc start mc 0x80a00000 0x80e00000\0" \
 292         "mcmemsize=0x70000000\0"
 293 #else
 294 #define MC_INIT_CMD                             \
 295         "mcinitcmd=env exists secureboot && "   \
 296         "esbc_validate 0x580640000 && "         \
 297         "esbc_validate 0x580680000; "           \
 298         "fsl_mc start mc 0x580a00000 0x580e00000 \0"
 299 #endif
 300 #endif
 301
 302 /* Initial environment variables */
 303 #undef CONFIG_EXTRA_ENV_SETTINGS
 304 #ifdef CONFIG_TFABOOT
 305 #define CONFIG_EXTRA_ENV_SETTINGS               \
 306         "hwconfig=fsl_ddr:bank_intlv=auto\0"    \
 307         "ramdisk_addr=0x800000\0"               \
 308         "ramdisk_size=0x2000000\0"              \
 309         "fdt_high=0xa0000000\0"                 \
 310         "initrd_high=0xffffffffffffffff\0"      \
 311         "kernel_addr=0x581000000\0"             \
 312         "kernel_start=0x1000000\0"              \
 313         "kernelheader_start=0x800000\0"         \
 314         "scriptaddr=0x80000000\0"               \
 315         "scripthdraddr=0x80080000\0"            \
 316         "fdtheader_addr_r=0x80100000\0"         \
 317         "kernelheader_addr_r=0x80200000\0"      \
 318         "kernelheader_addr=0x580600000\0"       \
 319         "kernel_addr_r=0x81000000\0"            \
 320         "kernelheader_size=0x40000\0"           \
 321         "fdt_addr_r=0x90000000\0"               \
 322         "load_addr=0xa0000000\0"                \
 323         "kernel_size=0x2800000\0"               \
 324         "kernel_addr_sd=0x8000\0"               \
 325         "kernel_size_sd=0x14000\0"              \
 326         "console=ttyAMA0,38400n8\0"             \
 327         "mcmemsize=0x70000000\0"                \
 328         "sd_bootcmd=echo Trying load from SD ..;" \
 329         "mmcinfo; mmc read $load_addr "         \
 330         "$kernel_addr_sd $kernel_size_sd && "   \
 331         "bootm $load_addr#$board\0"             \
 332         QSPI_MC_INIT_CMD                                \
 333         BOOTENV                                 \
 334         "boot_scripts=ls2088ardb_boot.scr\0"    \
 335         "boot_script_hdr=hdr_ls2088ardb_bs.out\0"       \
 336         "scan_dev_for_boot_part="               \
 337                 "part list ${devtype} ${devnum} devplist; "     \
 338                 "env exists devplist || setenv devplist 1; "    \
 339                 "for distro_bootpart in ${devplist}; do "       \
 340                         "if fstype ${devtype} "                 \
 341                                 "${devnum}:${distro_bootpart} " \
 342                                 "bootfstype; then "             \
 343                                 "run scan_dev_for_boot; "       \
 344                         "fi; "                                  \
 345                 "done\0"                                        \
 346         "boot_a_script="                                        \
 347                 "load ${devtype} ${devnum}:${distro_bootpart} " \
 348                         "${scriptaddr} ${prefix}${script}; "    \
 349                 "env exists secureboot && load ${devtype} "     \
 350                         "${devnum}:${distro_bootpart} "         \
 351                         "${scripthdraddr} ${prefix}${boot_script_hdr} " \
 352                         "&& esbc_validate ${scripthdraddr};"    \
 353                 "source ${scriptaddr}\0"                        \
 354         "qspi_bootcmd=echo Trying load from qspi..;"            \
 355                 "sf probe && sf read $load_addr "               \
 356                 "$kernel_start $kernel_size ; env exists secureboot &&" \
 357                 "sf read $kernelheader_addr_r $kernelheader_start "     \
 358                 "$kernelheader_size && esbc_validate ${kernelheader_addr_r}; "\
 359                 " bootm $load_addr#$board\0"                    \
 360         "nor_bootcmd=echo Trying load from nor..;"              \
 361                 "cp.b $kernel_addr $load_addr "                 \
 362                 "$kernel_size ; env exists secureboot && "      \
 363                 "cp.b $kernelheader_addr $kernelheader_addr_r " \
 364                 "$kernelheader_size && esbc_validate ${kernelheader_addr_r}; "\
 365                 "bootm $load_addr#$board\0"
 366 #else
 367 #define CONFIG_EXTRA_ENV_SETTINGS               \
 368         "hwconfig=fsl_ddr:bank_intlv=auto\0"    \
 369         "ramdisk_addr=0x800000\0"               \
 370         "ramdisk_size=0x2000000\0"              \
 371         "fdt_high=0xa0000000\0"                 \
 372         "initrd_high=0xffffffffffffffff\0"      \
 373         "kernel_addr=0x581000000\0"             \
 374         "kernel_start=0x1000000\0"              \
 375         "kernelheader_start=0x600000\0"         \
 376         "scriptaddr=0x80000000\0"               \
 377         "scripthdraddr=0x80080000\0"            \
 378         "fdtheader_addr_r=0x80100000\0"         \
 379         "kernelheader_addr_r=0x80200000\0"      \
 380         "kernelheader_addr=0x580600000\0"       \
 381         "kernel_addr_r=0x81000000\0"            \
 382         "kernelheader_size=0x40000\0"           \
 383         "fdt_addr_r=0x90000000\0"               \
 384         "load_addr=0xa0000000\0"                \
 385         "kernel_size=0x2800000\0"               \
 386         "kernel_addr_sd=0x8000\0"               \
 387         "kernel_size_sd=0x14000\0"              \
 388         "console=ttyAMA0,38400n8\0"             \
 389         "mcmemsize=0x70000000\0"                \
 390         "sd_bootcmd=echo Trying load from SD ..;" \
 391         "mmcinfo; mmc read $load_addr "         \
 392         "$kernel_addr_sd $kernel_size_sd && "   \
 393         "bootm $load_addr#$board\0"             \
 394         MC_INIT_CMD                             \
 395         BOOTENV                                 \
 396         "boot_scripts=ls2088ardb_boot.scr\0"    \
 397         "boot_script_hdr=hdr_ls2088ardb_bs.out\0"       \
 398         "scan_dev_for_boot_part="               \
 399                 "part list ${devtype} ${devnum} devplist; "     \
 400                 "env exists devplist || setenv devplist 1; "    \
 401                 "for distro_bootpart in ${devplist}; do "       \
 402                         "if fstype ${devtype} "                 \
 403                                 "${devnum}:${distro_bootpart} " \
 404                                 "bootfstype; then "             \
 405                                 "run scan_dev_for_boot; "       \
 406                         "fi; "                                  \
 407                 "done\0"                                        \
 408         "boot_a_script="                                        \
 409                 "load ${devtype} ${devnum}:${distro_bootpart} " \
 410                         "${scriptaddr} ${prefix}${script}; "    \
 411                 "env exists secureboot && load ${devtype} "     \
 412                         "${devnum}:${distro_bootpart} "         \
 413                         "${scripthdraddr} ${prefix}${boot_script_hdr}; " \
 414                         "env exists secureboot "        \
 415                         "&& esbc_validate ${scripthdraddr};"    \
 416                 "source ${scriptaddr}\0"                        \
 417         "qspi_bootcmd=echo Trying load from qspi..;"            \
 418                 "sf probe && sf read $load_addr "               \
 419                 "$kernel_start $kernel_size ; env exists secureboot &&" \
 420                 "sf read $kernelheader_addr_r $kernelheader_start "     \
 421                 "$kernelheader_size && esbc_validate ${kernelheader_addr_r}; "\
 422                 " bootm $load_addr#$board\0"                    \
 423         "nor_bootcmd=echo Trying load from nor..;"              \
 424                 "cp.b $kernel_addr $load_addr "                 \
 425                 "$kernel_size ; env exists secureboot && "      \
 426                 "cp.b $kernelheader_addr $kernelheader_addr_r " \
 427                 "$kernelheader_size && esbc_validate ${kernelheader_addr_r}; "\
 428                 "bootm $load_addr#$board\0"
 429 #endif
 430
 431 #ifdef CONFIG_TFABOOT
 432 #define QSPI_NOR_BOOTCOMMAND                                            \
 433                         "sf probe 0:0; "                                \
 434                         "sf read 0x806c0000 0x6c0000 0x40000; "         \
 435                         "env exists mcinitcmd && env exists secureboot "\
 436                         "&& esbc_validate 0x806c0000; "                 \
 437                         "sf read 0x80d00000 0xd00000 0x100000; "        \
 438                         "env exists mcinitcmd && "                      \
 439                         "fsl_mc lazyapply dpl 0x80d00000; "             \
 440                         "run distro_bootcmd;run qspi_bootcmd; "         \
 441                         "env exists secureboot && esbc_halt;"
 442
 443 /* Try to boot an on-SD kernel first, then do normal distro boot */
 444 #define SD_BOOTCOMMAND                                          \
 445                         "env exists mcinitcmd && env exists secureboot "\
 446                         "&& mmcinfo && mmc read $load_addr 0x3600 0x800 " \
 447                         "&& esbc_validate $load_addr; "                 \
 448                         "env exists mcinitcmd && run mcinitcmd "        \
 449                         "&& mmc read 0x80d00000 0x6800 0x800 "          \
 450                         "&& fsl_mc lazyapply dpl 0x80d00000; "          \
 451                         "run distro_bootcmd;run sd_bootcmd; "           \
 452                         "env exists secureboot && esbc_halt;"
 453
 454 /* Try to boot an on-NOR kernel first, then do normal distro boot */
 455 #define IFC_NOR_BOOTCOMMAND                                             \
 456                         "env exists mcinitcmd && env exists secureboot "\
 457                         "&& esbc_validate 0x5806C0000; env exists mcinitcmd "\
 458                         "&& fsl_mc lazyapply dpl 0x580d00000;"          \
 459                         "run distro_bootcmd;run nor_bootcmd; "          \
 460                         "env exists secureboot && esbc_halt;"
 461 #else
 462 #ifdef CONFIG_QSPI_BOOT
 463 /* Try to boot an on-QSPI kernel first, then do normal distro boot */
 464 #elif defined(CONFIG_SD_BOOT)
 465 /* Try to boot an on-SD kernel first, then do normal distro boot */
 466 #else
 467 /* Try to boot an on-NOR kernel first, then do normal distro boot */
 468 #endif
 469 #endif
 470
 471 /* MAC/PHY configuration */
 472 #define CORTINA_PHY_ADDR1       0x10
 473 #define CORTINA_PHY_ADDR2       0x11
 474 #define CORTINA_PHY_ADDR3       0x12
 475 #define CORTINA_PHY_ADDR4       0x13
 476 #define AQ_PHY_ADDR1            0x00
 477 #define AQ_PHY_ADDR2            0x01
 478 #define AQ_PHY_ADDR3            0x02
 479 #define AQ_PHY_ADDR4            0x03
 480 #define AQR405_IRQ_MASK         0x36
 481
 482 #include <asm/fsl_secure_boot.h>
 483
 484 #endif /* __LS2_RDB_H */