include/configs/ls2080aqds.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright 2017, 2019-2021 NXP
   4  * Copyright 2015 Freescale Semiconductor
   5  */
   6
   7 #ifndef __LS2_QDS_H
   8 #define __LS2_QDS_H
   9
  10 #include "ls2080a_common.h"
  11
  12 #ifdef CONFIG_FSL_QSPI
  13 #define CONFIG_SYS_I2C_IFDR_DIV         0x7e
  14 #endif
  15
  16 #define CONFIG_SYS_I2C_FPGA_ADDR        0x66
  17 #define COUNTER_FREQUENCY_REAL          (get_board_sys_clk()/4)
  18
  19 #define CONFIG_MEM_INIT_VALUE           0xdeadbeef
  20 #define SPD_EEPROM_ADDRESS1     0x51
  21 #define SPD_EEPROM_ADDRESS2     0x52
  22 #define SPD_EEPROM_ADDRESS3     0x53
  23 #define SPD_EEPROM_ADDRESS4     0x54
  24 #define SPD_EEPROM_ADDRESS5     0x55
  25 #define SPD_EEPROM_ADDRESS6     0x56    /* dummy address */
  26 #define SPD_EEPROM_ADDRESS      SPD_EEPROM_ADDRESS1
  27
  28 #define CONFIG_SYS_NOR0_CSPR_EXT        (0x0)
  29 #define CONFIG_SYS_NOR_AMASK            IFC_AMASK(128*1024*1024)
  30 #define CONFIG_SYS_NOR_AMASK_EARLY      IFC_AMASK(64*1024*1024)
  31
  32 #define CONFIG_SYS_NOR0_CSPR                                    \
  33         (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS)             | \
  34         CSPR_PORT_SIZE_16                                       | \
  35         CSPR_MSEL_NOR                                           | \
  36         CSPR_V)
  37 #define CONFIG_SYS_NOR0_CSPR_EARLY                              \
  38         (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS_EARLY)       | \
  39         CSPR_PORT_SIZE_16                                       | \
  40         CSPR_MSEL_NOR                                           | \
  41         CSPR_V)
  42 #define CONFIG_SYS_NOR1_CSPR                                    \
  43         (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH1_BASE_PHYS)            | \
  44         CSPR_PORT_SIZE_16                                       | \
  45         CSPR_MSEL_NOR                                           | \
  46         CSPR_V)
  47 #define CONFIG_SYS_NOR1_CSPR_EARLY                              \
  48         (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH1_BASE_PHYS_EARLY)      | \
  49         CSPR_PORT_SIZE_16                                       | \
  50         CSPR_MSEL_NOR                                           | \
  51         CSPR_V)
  52 #define CONFIG_SYS_NOR_CSOR     CSOR_NOR_ADM_SHIFT(12)
  53 #define CONFIG_SYS_NOR_FTIM0    (FTIM0_NOR_TACSE(0x4) | \
  54                                 FTIM0_NOR_TEADC(0x5) | \
  55                                 FTIM0_NOR_TEAHC(0x5))
  56 #define CONFIG_SYS_NOR_FTIM1    (FTIM1_NOR_TACO(0x35) | \
  57                                 FTIM1_NOR_TRAD_NOR(0x1a) |\
  58                                 FTIM1_NOR_TSEQRAD_NOR(0x13))
  59 #define CONFIG_SYS_NOR_FTIM2    (FTIM2_NOR_TCS(0x4) | \
  60                                 FTIM2_NOR_TCH(0x4) | \
  61                                 FTIM2_NOR_TWPH(0x0E) | \
  62                                 FTIM2_NOR_TWP(0x1c))
  63 #define CONFIG_SYS_NOR_FTIM3    0x04000000
  64 #define CONFIG_SYS_IFC_CCR      0x01000000
  65
  66 #ifdef CONFIG_MTD_NOR_FLASH
  67 #define CONFIG_FLASH_SHOW_PROGRESS      45 /* count down from 45/5: 9..1 */
  68
  69 #define CONFIG_SYS_FLASH_BANKS_LIST     { CONFIG_SYS_FLASH_BASE,\
  70                                          CONFIG_SYS_FLASH_BASE + 0x40000000}
  71 #endif
  72
  73 #define CONFIG_SYS_NAND_MAX_ECCPOS      256
  74 #define CONFIG_SYS_NAND_MAX_OOBFREE     2
  75
  76 #define CONFIG_SYS_NAND_CSPR_EXT        (0x0)
  77 #define CONFIG_SYS_NAND_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
  78                                 | CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \
  79                                 | CSPR_MSEL_NAND        /* MSEL = NAND */ \
  80                                 | CSPR_V)
  81 #define CONFIG_SYS_NAND_AMASK   IFC_AMASK(64 * 1024)
  82
  83 #define CONFIG_SYS_NAND_CSOR    (CSOR_NAND_ECC_ENC_EN   /* ECC on encode */ \
  84                                 | CSOR_NAND_ECC_DEC_EN  /* ECC on decode */ \
  85                                 | CSOR_NAND_ECC_MODE_4  /* 4-bit ECC */ \
  86                                 | CSOR_NAND_RAL_3       /* RAL = 3Byes */ \
  87                                 | CSOR_NAND_PGS_2K      /* Page Size = 2K */ \
  88                                 | CSOR_NAND_SPRZ_64/* Spare size = 64 */ \
  89                                 | CSOR_NAND_PB(64))     /*Pages Per Block = 64*/
  90
  91 /* ONFI NAND Flash mode0 Timing Params */
  92 #define CONFIG_SYS_NAND_FTIM0           (FTIM0_NAND_TCCST(0x07) | \
  93                                         FTIM0_NAND_TWP(0x18)   | \
  94                                         FTIM0_NAND_TWCHT(0x07) | \
  95                                         FTIM0_NAND_TWH(0x0a))
  96 #define CONFIG_SYS_NAND_FTIM1           (FTIM1_NAND_TADLE(0x32) | \
  97                                         FTIM1_NAND_TWBE(0x39)  | \
  98                                         FTIM1_NAND_TRR(0x0e)   | \
  99                                         FTIM1_NAND_TRP(0x18))
 100 #define CONFIG_SYS_NAND_FTIM2           (FTIM2_NAND_TRAD(0x0f) | \
 101                                         FTIM2_NAND_TREH(0x0a) | \
 102                                         FTIM2_NAND_TWHRE(0x1e))
 103 #define CONFIG_SYS_NAND_FTIM3           0x0
 104
 105 #define CONFIG_SYS_NAND_BASE_LIST       { CONFIG_SYS_NAND_BASE }
 106 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 107 #define CONFIG_MTD_NAND_VERIFY_WRITE
 108
 109 #define QIXIS_LBMAP_SWITCH              0x06
 110 #define QIXIS_LBMAP_MASK                0x0f
 111 #define QIXIS_LBMAP_SHIFT               0
 112 #define QIXIS_LBMAP_DFLTBANK            0x00
 113 #define QIXIS_LBMAP_ALTBANK             0x04
 114 #define QIXIS_LBMAP_NAND                0x09
 115 #define QIXIS_LBMAP_SD                  0x00
 116 #define QIXIS_LBMAP_QSPI                0x0f
 117 #define QIXIS_RST_CTL_RESET             0x31
 118 #define QIXIS_RCFG_CTL_RECONFIG_IDLE    0x20
 119 #define QIXIS_RCFG_CTL_RECONFIG_START   0x21
 120 #define QIXIS_RCFG_CTL_WATCHDOG_ENBLE   0x08
 121 #define QIXIS_RCW_SRC_NAND              0x107
 122 #define QIXIS_RCW_SRC_SD                0x40
 123 #define QIXIS_RCW_SRC_QSPI              0x62
 124 #define QIXIS_RST_FORCE_MEM             0x01
 125
 126 #define CONFIG_SYS_CSPR3_EXT    (0x0)
 127 #define CONFIG_SYS_CSPR3        (CSPR_PHYS_ADDR(QIXIS_BASE_PHYS_EARLY) \
 128                                 | CSPR_PORT_SIZE_8 \
 129                                 | CSPR_MSEL_GPCM \
 130                                 | CSPR_V)
 131 #define CONFIG_SYS_CSPR3_FINAL  (CSPR_PHYS_ADDR(QIXIS_BASE_PHYS) \
 132                                 | CSPR_PORT_SIZE_8 \
 133                                 | CSPR_MSEL_GPCM \
 134                                 | CSPR_V)
 135
 136 #define CONFIG_SYS_AMASK3       IFC_AMASK(64*1024)
 137 #define CONFIG_SYS_CSOR3        CSOR_GPCM_ADM_SHIFT(12)
 138 /* QIXIS Timing parameters for IFC CS3 */
 139 #define CONFIG_SYS_CS3_FTIM0            (FTIM0_GPCM_TACSE(0x0e) | \
 140                                         FTIM0_GPCM_TEADC(0x0e) | \
 141                                         FTIM0_GPCM_TEAHC(0x0e))
 142 #define CONFIG_SYS_CS3_FTIM1            (FTIM1_GPCM_TACO(0xff) | \
 143                                         FTIM1_GPCM_TRAD(0x3f))
 144 #define CONFIG_SYS_CS3_FTIM2            (FTIM2_GPCM_TCS(0xf) | \
 145                                         FTIM2_GPCM_TCH(0xf) | \
 146                                         FTIM2_GPCM_TWP(0x3E))
 147 #define CONFIG_SYS_CS3_FTIM3            0x0
 148
 149 #if defined(CONFIG_SPL)
 150 #if defined(CONFIG_NAND_BOOT)
 151 #define CONFIG_SYS_CSPR1_EXT            CONFIG_SYS_NOR0_CSPR_EXT
 152 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NOR0_CSPR_EARLY
 153 #define CONFIG_SYS_CSPR1_FINAL          CONFIG_SYS_NOR0_CSPR
 154 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NOR_AMASK
 155 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NOR_CSOR
 156 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NOR_FTIM0
 157 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NOR_FTIM1
 158 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NOR_FTIM2
 159 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NOR_FTIM3
 160 #define CONFIG_SYS_CSPR2_EXT            CONFIG_SYS_NOR0_CSPR_EXT
 161 #define CONFIG_SYS_CSPR2                CONFIG_SYS_NOR1_CSPR_EARLY
 162 #define CONFIG_SYS_CSPR2_FINAL          CONFIG_SYS_NOR1_CSPR
 163 #define CONFIG_SYS_AMASK2               CONFIG_SYS_NOR_AMASK_EARLY
 164 #define CONFIG_SYS_AMASK2_FINAL         CONFIG_SYS_NOR_AMASK
 165 #define CONFIG_SYS_CSOR2                CONFIG_SYS_NOR_CSOR
 166 #define CONFIG_SYS_CS2_FTIM0            CONFIG_SYS_NOR_FTIM0
 167 #define CONFIG_SYS_CS2_FTIM1            CONFIG_SYS_NOR_FTIM1
 168 #define CONFIG_SYS_CS2_FTIM2            CONFIG_SYS_NOR_FTIM2
 169 #define CONFIG_SYS_CS2_FTIM3            CONFIG_SYS_NOR_FTIM3
 170 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NAND_CSPR_EXT
 171 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NAND_CSPR
 172 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NAND_AMASK
 173 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NAND_CSOR
 174 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NAND_FTIM0
 175 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NAND_FTIM1
 176 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NAND_FTIM2
 177 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NAND_FTIM3
 178
 179 #define CONFIG_SYS_NAND_U_BOOT_SIZE     (640 * 1024)
 180 #endif
 181 #else
 182 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NOR0_CSPR_EXT
 183 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NOR0_CSPR_EARLY
 184 #define CONFIG_SYS_CSPR0_FINAL          CONFIG_SYS_NOR0_CSPR
 185 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NOR_AMASK
 186 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NOR_CSOR
 187 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NOR_FTIM0
 188 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NOR_FTIM1
 189 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NOR_FTIM2
 190 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NOR_FTIM3
 191 #define CONFIG_SYS_CSPR1_EXT            CONFIG_SYS_NOR0_CSPR_EXT
 192 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NOR1_CSPR_EARLY
 193 #define CONFIG_SYS_CSPR1_FINAL          CONFIG_SYS_NOR1_CSPR
 194 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NOR_AMASK_EARLY
 195 #define CONFIG_SYS_AMASK1_FINAL         CONFIG_SYS_NOR_AMASK
 196 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NOR_CSOR
 197 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NOR_FTIM0
 198 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NOR_FTIM1
 199 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NOR_FTIM2
 200 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NOR_FTIM3
 201 #define CONFIG_SYS_CSPR2_EXT            CONFIG_SYS_NAND_CSPR_EXT
 202 #define CONFIG_SYS_CSPR2                CONFIG_SYS_NAND_CSPR
 203 #define CONFIG_SYS_AMASK2               CONFIG_SYS_NAND_AMASK
 204 #define CONFIG_SYS_CSOR2                CONFIG_SYS_NAND_CSOR
 205 #define CONFIG_SYS_CS2_FTIM0            CONFIG_SYS_NAND_FTIM0
 206 #define CONFIG_SYS_CS2_FTIM1            CONFIG_SYS_NAND_FTIM1
 207 #define CONFIG_SYS_CS2_FTIM2            CONFIG_SYS_NAND_FTIM2
 208 #define CONFIG_SYS_CS2_FTIM3            CONFIG_SYS_NAND_FTIM3
 209 #endif
 210
 211 #define CONFIG_SYS_LS_MC_BOOT_TIMEOUT_MS 5000
 212
 213 /*
 214  * I2C
 215  */
 216 #define I2C_MUX_PCA_ADDR                0x77
 217 #define I2C_MUX_PCA_ADDR_PRI            0x77 /* Primary Mux*/
 218
 219 /* I2C bus multiplexer */
 220 #define I2C_MUX_CH_DEFAULT      0x8
 221
 222 /* SPI */
 223
 224 /*
 225  * Verify QSPI when boot from NAND, QIXIS brdcfg9 need configure.
 226  * If boot from on-board NAND, ISO1 = 1, ISO2 = 0, IBOOT = 0
 227  * If boot from IFCCard NAND, ISO1 = 0, ISO2 = 0, IBOOT = 1
 228  */
 229 #define FSL_QIXIS_BRDCFG9_QSPI          0x1
 230
 231 /*
 232  * RTC configuration
 233  */
 234 #define RTC
 235 #define CONFIG_RTC_DS3231               1
 236 #define CONFIG_SYS_I2C_RTC_ADDR         0x68
 237
 238 /* Initial environment variables */
 239 #undef CONFIG_EXTRA_ENV_SETTINGS
 240 #ifdef CONFIG_NXP_ESBC
 241 #define CONFIG_EXTRA_ENV_SETTINGS               \
 242         "hwconfig=fsl_ddr:bank_intlv=auto\0"    \
 243         "loadaddr=0x80100000\0"                 \
 244         "kernel_addr=0x100000\0"                \
 245         "ramdisk_addr=0x800000\0"               \
 246         "ramdisk_size=0x2000000\0"              \
 247         "fdt_high=0xa0000000\0"                 \
 248         "initrd_high=0xffffffffffffffff\0"      \
 249         "kernel_start=0x581000000\0"            \
 250         "kernel_load=0xa0000000\0"              \
 251         "kernel_size=0x2800000\0"               \
 252         "mcmemsize=0x40000000\0"                \
 253         "mcinitcmd=esbc_validate 0x580640000;"  \
 254         "esbc_validate 0x580680000;"            \
 255         "fsl_mc start mc 0x580a00000"           \
 256         " 0x580e00000 \0"
 257 #else
 258 #ifdef CONFIG_TFABOOT
 259 #define SD_MC_INIT_CMD                          \
 260         "mmcinfo;mmc read 0x80a00000 0x5000 0x1000;"  \
 261         "mmc read 0x80e00000 0x7000 0x800;" \
 262         "fsl_mc start mc 0x80a00000 0x80e00000\0"
 263 #define IFC_MC_INIT_CMD                         \
 264         "fsl_mc start mc 0x580a00000" \
 265         " 0x580e00000 \0"
 266 #define CONFIG_EXTRA_ENV_SETTINGS               \
 267         "hwconfig=fsl_ddr:bank_intlv=auto\0"    \
 268         "loadaddr=0x80100000\0"                 \
 269         "loadaddr_sd=0x90100000\0"                 \
 270         "kernel_addr=0x581000000\0"                       \
 271         "kernel_addr_sd=0x8000\0"                \
 272         "ramdisk_addr=0x800000\0"               \
 273         "ramdisk_size=0x2000000\0"              \
 274         "fdt_high=0xa0000000\0"                 \
 275         "initrd_high=0xffffffffffffffff\0"      \
 276         "kernel_start=0x581000000\0"            \
 277         "kernel_start_sd=0x8000\0"              \
 278         "kernel_load=0xa0000000\0"              \
 279         "kernel_size=0x2800000\0"               \
 280         "kernel_size_sd=0x14000\0"               \
 281         "load_addr=0xa0000000\0"                            \
 282         "kernelheader_addr=0x580600000\0"       \
 283         "kernelheader_addr_r=0x80200000\0"      \
 284         "kernelheader_size=0x40000\0"           \
 285         "BOARD=ls2088aqds\0" \
 286         "mcmemsize=0x70000000 \0" \
 287         "scriptaddr=0x80000000\0"               \
 288         "scripthdraddr=0x80080000\0"            \
 289         IFC_MC_INIT_CMD                         \
 290         BOOTENV                                 \
 291         "boot_scripts=ls2088aqds_boot.scr\0"    \
 292         "boot_script_hdr=hdr_ls2088aqds_bs.out\0"       \
 293         "scan_dev_for_boot_part="               \
 294                 "part list ${devtype} ${devnum} devplist; "     \
 295                 "env exists devplist || setenv devplist 1; "    \
 296                 "for distro_bootpart in ${devplist}; do "       \
 297                         "if fstype ${devtype} "                 \
 298                                 "${devnum}:${distro_bootpart} " \
 299                                 "bootfstype; then "             \
 300                                 "run scan_dev_for_boot; "       \
 301                         "fi; "                                  \
 302                 "done\0"                                        \
 303         "boot_a_script="                                        \
 304                 "load ${devtype} ${devnum}:${distro_bootpart} " \
 305                         "${scriptaddr} ${prefix}${script}; "    \
 306                 "env exists secureboot && load ${devtype} "     \
 307                         "${devnum}:${distro_bootpart} "         \
 308                         "${scripthdraddr} ${prefix}${boot_script_hdr} " \
 309                         "&& esbc_validate ${scripthdraddr};"    \
 310                 "source ${scriptaddr}\0"                        \
 311         "nor_bootcmd=echo Trying load from nor..;"              \
 312                 "cp.b $kernel_addr $load_addr "                 \
 313                 "$kernel_size ; env exists secureboot && "      \
 314                 "cp.b $kernelheader_addr $kernelheader_addr_r " \
 315                 "$kernelheader_size && esbc_validate ${kernelheader_addr_r}; "\
 316                 "bootm $load_addr#$BOARD\0"     \
 317         "sd_bootcmd=echo Trying load from SD ..;" \
 318         "mmcinfo; mmc read $load_addr "         \
 319         "$kernel_addr_sd $kernel_size_sd && "   \
 320         "bootm $load_addr#$BOARD\0"
 321 #elif defined(CONFIG_SD_BOOT)
 322 #define CONFIG_EXTRA_ENV_SETTINGS               \
 323         "hwconfig=fsl_ddr:bank_intlv=auto\0"    \
 324         "loadaddr=0x90100000\0"                 \
 325         "kernel_addr=0x800\0"                \
 326         "ramdisk_addr=0x800000\0"               \
 327         "ramdisk_size=0x2000000\0"              \
 328         "fdt_high=0xa0000000\0"                 \
 329         "initrd_high=0xffffffffffffffff\0"      \
 330         "kernel_start=0x8000\0"              \
 331         "kernel_load=0xa0000000\0"              \
 332         "kernel_size=0x14000\0"               \
 333         "mcinitcmd=mmcinfo;mmc read 0x80a00000 0x5000 0x1000;"  \
 334         "mmc read 0x80e00000 0x7000 0x800;" \
 335         "fsl_mc start mc 0x80a00000 0x80e00000\0"       \
 336         "mcmemsize=0x70000000 \0"
 337 #else
 338 #define CONFIG_EXTRA_ENV_SETTINGS               \
 339         "hwconfig=fsl_ddr:bank_intlv=auto\0"    \
 340         "loadaddr=0x80100000\0"                 \
 341         "kernel_addr=0x100000\0"                \
 342         "ramdisk_addr=0x800000\0"               \
 343         "ramdisk_size=0x2000000\0"              \
 344         "fdt_high=0xa0000000\0"                 \
 345         "initrd_high=0xffffffffffffffff\0"      \
 346         "kernel_start=0x581000000\0"            \
 347         "kernel_load=0xa0000000\0"              \
 348         "kernel_size=0x2800000\0"               \
 349         "mcmemsize=0x40000000\0"                \
 350         "mcinitcmd=fsl_mc start mc 0x580a00000" \
 351         " 0x580e00000 \0"
 352 #endif /* CONFIG_TFABOOT */
 353 #endif /* CONFIG_NXP_ESBC */
 354
 355 #ifdef CONFIG_TFABOOT
 356 #define BOOT_TARGET_DEVICES(func) \
 357         func(USB, usb, 0) \
 358         func(MMC, mmc, 0) \
 359         func(SCSI, scsi, 0) \
 360         func(DHCP, dhcp, na)
 361 #include <config_distro_bootcmd.h>
 362
 363 #define SD_BOOTCOMMAND                                          \
 364                         "env exists mcinitcmd && env exists secureboot "\
 365                         "&& mmcinfo && mmc read $load_addr 0x3600 0x800 " \
 366                         "&& esbc_validate $load_addr; "                 \
 367                         "env exists mcinitcmd && run mcinitcmd "        \
 368                         "&& mmc read 0x80d00000 0x6800 0x800 "          \
 369                         "&& fsl_mc lazyapply dpl 0x80d00000; "          \
 370                         "run distro_bootcmd;run sd_bootcmd; "           \
 371                         "env exists secureboot && esbc_halt;"
 372
 373 #define IFC_NOR_BOOTCOMMAND                                             \
 374                         "env exists mcinitcmd && env exists secureboot "\
 375                         "&& esbc_validate 0x5806C0000; env exists mcinitcmd "\
 376                         "&& fsl_mc lazyapply dpl 0x580d00000;"          \
 377                         "run distro_bootcmd;run nor_bootcmd; "          \
 378                         "env exists secureboot && esbc_halt;"
 379 #endif
 380
 381 #if defined(CONFIG_FSL_MC_ENET)
 382 #define SGMII_CARD_PORT1_PHY_ADDR 0x1C
 383 #define SGMII_CARD_PORT2_PHY_ADDR 0x1d
 384 #define SGMII_CARD_PORT3_PHY_ADDR 0x1E
 385 #define SGMII_CARD_PORT4_PHY_ADDR 0x1F
 386
 387 #define XQSGMII_CARD_PHY1_PORT0_ADDR 0x0
 388 #define XQSGMII_CARD_PHY1_PORT1_ADDR 0x1
 389 #define XQSGMII_CARD_PHY1_PORT2_ADDR 0x2
 390 #define XQSGMII_CARD_PHY1_PORT3_ADDR 0x3
 391 #define XQSGMII_CARD_PHY2_PORT0_ADDR 0x4
 392 #define XQSGMII_CARD_PHY2_PORT1_ADDR 0x5
 393 #define XQSGMII_CARD_PHY2_PORT2_ADDR 0x6
 394 #define XQSGMII_CARD_PHY2_PORT3_ADDR 0x7
 395 #define XQSGMII_CARD_PHY3_PORT0_ADDR 0x8
 396 #define XQSGMII_CARD_PHY3_PORT1_ADDR 0x9
 397 #define XQSGMII_CARD_PHY3_PORT2_ADDR 0xa
 398 #define XQSGMII_CARD_PHY3_PORT3_ADDR 0xb
 399 #define XQSGMII_CARD_PHY4_PORT0_ADDR 0xc
 400 #define XQSGMII_CARD_PHY4_PORT1_ADDR 0xd
 401 #define XQSGMII_CARD_PHY4_PORT2_ADDR 0xe
 402 #define XQSGMII_CARD_PHY4_PORT3_ADDR 0xf
 403
 404 #endif
 405
 406 #include <asm/fsl_secure_boot.h>
 407
 408 #endif /* __LS2_QDS_H */