include/configs/ls1046ardb.h

   1 /*
   2  * Copyright 2016 Freescale Semiconductor
   3  *
   4  * SPDX-License-Identifier:     GPL-2.0+
   5  */
   6
   7 #ifndef __LS1046ARDB_H__
   8 #define __LS1046ARDB_H__
   9
  10 #include "ls1046a_common.h"
  11
  12 #ifdef CONFIG_SD_BOOT
  13 #define CONFIG_SYS_TEXT_BASE            0x82000000
  14 #else
  15 #define CONFIG_SYS_TEXT_BASE            0x40100000
  16 #endif
  17
  18 #define CONFIG_SYS_CLK_FREQ             100000000
  19 #define CONFIG_DDR_CLK_FREQ             100000000
  20
  21 #define CONFIG_LAYERSCAPE_NS_ACCESS
  22 #define CONFIG_MISC_INIT_R
  23
  24 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
  25 /* Physical Memory Map */
  26 #define CONFIG_CHIP_SELECTS_PER_CTRL    4
  27 #define CONFIG_NR_DRAM_BANKS            2
  28
  29 #define CONFIG_DDR_SPD
  30 #define SPD_EEPROM_ADDRESS              0x51
  31 #define CONFIG_SYS_SPD_BUS_NUM          0
  32
  33 #define CONFIG_DDR_ECC
  34 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
  35 #define CONFIG_MEM_INIT_VALUE           0xdeadbeef
  36 #define CONFIG_FSL_DDR_BIST     /* enable built-in memory test */
  37 #ifndef CONFIG_SPL
  38 #define CONFIG_FSL_DDR_INTERACTIVE      /* Interactive debugging */
  39 #endif
  40
  41 #ifdef CONFIG_RAMBOOT_PBL
  42 #define CONFIG_SYS_FSL_PBL_PBI board/freescale/ls1046ardb/ls1046ardb_pbi.cfg
  43 #endif
  44
  45 #ifdef CONFIG_SD_BOOT
  46 #ifdef CONFIG_EMMC_BOOT
  47 #define CONFIG_SYS_FSL_PBL_RCW \
  48         board/freescale/ls1046ardb/ls1046ardb_rcw_emmc.cfg
  49 #else
  50 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/ls1046ardb/ls1046ardb_rcw_sd.cfg
  51 #endif
  52 #endif
  53
  54 #ifndef SPL_NO_IFC
  55 /* IFC */
  56 #define CONFIG_FSL_IFC
  57 /*
  58  * NAND Flash Definitions
  59  */
  60 #define CONFIG_NAND_FSL_IFC
  61 #endif
  62
  63 #define CONFIG_SYS_NAND_BASE            0x7e800000
  64 #define CONFIG_SYS_NAND_BASE_PHYS       CONFIG_SYS_NAND_BASE
  65
  66 #define CONFIG_SYS_NAND_CSPR_EXT        (0x0)
  67 #define CONFIG_SYS_NAND_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
  68                                 | CSPR_PORT_SIZE_8      \
  69                                 | CSPR_MSEL_NAND        \
  70                                 | CSPR_V)
  71 #define CONFIG_SYS_NAND_AMASK   IFC_AMASK(64 * 1024)
  72 #define CONFIG_SYS_NAND_CSOR    (CSOR_NAND_ECC_ENC_EN   /* ECC on encode */ \
  73                                 | CSOR_NAND_ECC_DEC_EN  /* ECC on decode */ \
  74                                 | CSOR_NAND_ECC_MODE_8  /* 8-bit ECC */ \
  75                                 | CSOR_NAND_RAL_3       /* RAL = 3 Bytes */ \
  76                                 | CSOR_NAND_PGS_4K      /* Page Size = 4K */ \
  77                                 | CSOR_NAND_SPRZ_224    /* Spare size = 224 */ \
  78                                 | CSOR_NAND_PB(64))     /* 64 Pages Per Block */
  79
  80 #define CONFIG_SYS_NAND_ONFI_DETECTION
  81
  82 #define CONFIG_SYS_NAND_FTIM0           (FTIM0_NAND_TCCST(0x7) | \
  83                                         FTIM0_NAND_TWP(0x18)   | \
  84                                         FTIM0_NAND_TWCHT(0x7) | \
  85                                         FTIM0_NAND_TWH(0xa))
  86 #define CONFIG_SYS_NAND_FTIM1           (FTIM1_NAND_TADLE(0x32) | \
  87                                         FTIM1_NAND_TWBE(0x39)  | \
  88                                         FTIM1_NAND_TRR(0xe)   | \
  89                                         FTIM1_NAND_TRP(0x18))
  90 #define CONFIG_SYS_NAND_FTIM2           (FTIM2_NAND_TRAD(0xf) | \
  91                                         FTIM2_NAND_TREH(0xa) | \
  92                                         FTIM2_NAND_TWHRE(0x1e))
  93 #define CONFIG_SYS_NAND_FTIM3           0x0
  94
  95 #define CONFIG_SYS_NAND_BASE_LIST       { CONFIG_SYS_NAND_BASE }
  96 #define CONFIG_SYS_MAX_NAND_DEVICE      1
  97 #define CONFIG_MTD_NAND_VERIFY_WRITE
  98
  99 #define CONFIG_SYS_NAND_BLOCK_SIZE      (128 * 1024)
 100
 101 /*
 102  * CPLD
 103  */
 104 #define CONFIG_SYS_CPLD_BASE            0x7fb00000
 105 #define CPLD_BASE_PHYS                  CONFIG_SYS_CPLD_BASE
 106
 107 #define CONFIG_SYS_CPLD_CSPR_EXT        (0x0)
 108 #define CONFIG_SYS_CPLD_CSPR            (CSPR_PHYS_ADDR(CPLD_BASE_PHYS) | \
 109                                         CSPR_PORT_SIZE_8 | \
 110                                         CSPR_MSEL_GPCM | \
 111                                         CSPR_V)
 112 #define CONFIG_SYS_CPLD_AMASK           IFC_AMASK(64 * 1024)
 113 #define CONFIG_SYS_CPLD_CSOR            CSOR_NOR_ADM_SHIFT(16)
 114
 115 /* CPLD Timing parameters for IFC GPCM */
 116 #define CONFIG_SYS_CPLD_FTIM0           (FTIM0_GPCM_TACSE(0x0e) | \
 117                                         FTIM0_GPCM_TEADC(0x0e) | \
 118                                         FTIM0_GPCM_TEAHC(0x0e))
 119 #define CONFIG_SYS_CPLD_FTIM1           (FTIM1_GPCM_TACO(0xff) | \
 120                                         FTIM1_GPCM_TRAD(0x3f))
 121 #define CONFIG_SYS_CPLD_FTIM2           (FTIM2_GPCM_TCS(0xf) | \
 122                                         FTIM2_GPCM_TCH(0xf) | \
 123                                         FTIM2_GPCM_TWP(0x3E))
 124 #define CONFIG_SYS_CPLD_FTIM3           0x0
 125
 126 /* IFC Timing Params */
 127 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NAND_CSPR_EXT
 128 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NAND_CSPR
 129 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NAND_AMASK
 130 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NAND_CSOR
 131 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NAND_FTIM0
 132 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NAND_FTIM1
 133 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NAND_FTIM2
 134 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NAND_FTIM3
 135
 136 #define CONFIG_SYS_CSPR2_EXT            CONFIG_SYS_CPLD_CSPR_EXT
 137 #define CONFIG_SYS_CSPR2                CONFIG_SYS_CPLD_CSPR
 138 #define CONFIG_SYS_AMASK2               CONFIG_SYS_CPLD_AMASK
 139 #define CONFIG_SYS_CSOR2                CONFIG_SYS_CPLD_CSOR
 140 #define CONFIG_SYS_CS2_FTIM0            CONFIG_SYS_CPLD_FTIM0
 141 #define CONFIG_SYS_CS2_FTIM1            CONFIG_SYS_CPLD_FTIM1
 142 #define CONFIG_SYS_CS2_FTIM2            CONFIG_SYS_CPLD_FTIM2
 143 #define CONFIG_SYS_CS2_FTIM3            CONFIG_SYS_CPLD_FTIM3
 144
 145 /* EEPROM */
 146 #define CONFIG_ID_EEPROM
 147 #define CONFIG_SYS_I2C_EEPROM_NXID
 148 #define CONFIG_SYS_EEPROM_BUS_NUM               0
 149 #define CONFIG_SYS_I2C_EEPROM_ADDR              0x53
 150 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN          1
 151 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS       3
 152 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS   5
 153 #define I2C_RETIMER_ADDR                        0x18
 154
 155 /* PMIC */
 156 #define CONFIG_POWER
 157 #ifdef CONFIG_POWER
 158 #define CONFIG_POWER_I2C
 159 #endif
 160
 161 /*
 162  * Environment
 163  */
 164 #ifndef SPL_NO_ENV
 165 #define CONFIG_ENV_OVERWRITE
 166 #endif
 167
 168 #if defined(CONFIG_SD_BOOT)
 169 #define CONFIG_SYS_MMC_ENV_DEV          0
 170 #define CONFIG_ENV_OFFSET               (3 * 1024 * 1024)
 171 #define CONFIG_ENV_SIZE                 0x2000
 172 #else
 173 #define CONFIG_ENV_SIZE                 0x2000          /* 8KB */
 174 #define CONFIG_ENV_OFFSET               0x300000        /* 3MB */
 175 #define CONFIG_ENV_SECT_SIZE            0x40000         /* 256KB */
 176 #endif
 177
 178 #define AQR105_IRQ_MASK                 0x80000000
 179 /* FMan */
 180 #ifndef SPL_NO_FMAN
 181
 182 #ifdef CONFIG_NET
 183 #define CONFIG_PHY_GIGE         /* Include GbE speed/duplex detection */
 184 #define CONFIG_PHY_REALTEK
 185 #endif
 186
 187 #ifdef CONFIG_SYS_DPAA_FMAN
 188 #define CONFIG_FMAN_ENET
 189 #define CONFIG_PHY_AQUANTIA
 190 #define CONFIG_PHYLIB_10G
 191 #define RGMII_PHY1_ADDR                 0x1
 192 #define RGMII_PHY2_ADDR                 0x2
 193
 194 #define SGMII_PHY1_ADDR                 0x3
 195 #define SGMII_PHY2_ADDR                 0x4
 196
 197 #define FM1_10GEC1_PHY_ADDR             0x0
 198
 199 #define CONFIG_ETHPRIME                 "FM1@DTSEC3"
 200 #endif
 201
 202 #endif
 203
 204 /* QSPI device */
 205 #ifndef SPL_NO_QSPI
 206 #ifdef CONFIG_FSL_QSPI
 207 #define CONFIG_SPI_FLASH_SPANSION
 208 #define FSL_QSPI_FLASH_SIZE             (1 << 26)
 209 #define FSL_QSPI_FLASH_NUM              2
 210 #endif
 211 #endif
 212
 213 /* USB */
 214 #ifndef SPL_NO_USB
 215 #define CONFIG_HAS_FSL_XHCI_USB
 216 #ifdef CONFIG_HAS_FSL_XHCI_USB
 217 #define CONFIG_USB_XHCI_HCD
 218 #define CONFIG_USB_XHCI_FSL
 219 #define CONFIG_USB_XHCI_DWC3
 220 #define CONFIG_USB_MAX_CONTROLLER_COUNT         3
 221 #define CONFIG_USB_STORAGE
 222 #endif
 223 #endif
 224
 225 /* SATA */
 226 #ifndef SPL_NO_SATA
 227 #define CONFIG_LIBATA
 228 #define CONFIG_SCSI_AHCI
 229 #define CONFIG_SCSI_AHCI_PLAT
 230
 231 #define CONFIG_SYS_SATA                         AHCI_BASE_ADDR
 232
 233 #define CONFIG_SYS_SCSI_MAX_SCSI_ID             1
 234 #define CONFIG_SYS_SCSI_MAX_LUN                 1
 235 #define CONFIG_SYS_SCSI_MAX_DEVICE              (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
 236                                                 CONFIG_SYS_SCSI_MAX_LUN)
 237 #endif
 238
 239 #ifndef SPL_NO_MISC
 240 #undef CONFIG_BOOTCOMMAND
 241 #define CONFIG_BOOTCOMMAND "run distro_bootcmd; env exists secureboot"  \
 242                            "&& esbc_halt; run qspi_bootcmd;"
 243 #define MTDPARTS_DEFAULT "mtdparts=1550000.quadspi:1m(rcw)," \
 244                         "15m(u-boot),48m(kernel.itb);" \
 245                         "7e800000.flash:16m(nand_uboot)," \
 246                         "48m(nand_kernel),448m(nand_free)"
 247 #endif
 248
 249 #include <asm/fsl_secure_boot.h>
 250
 251 #endif /* __LS1046ARDB_H__ */