include/configs/ls1046a_common.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright 2016 Freescale Semiconductor
   4  */
   5
   6 #ifndef __LS1046A_COMMON_H
   7 #define __LS1046A_COMMON_H
   8
   9 /* SPL build */
  10 #ifdef CONFIG_SPL_BUILD
  11 #define SPL_NO_QBMAN
  12 #define SPL_NO_FMAN
  13 #define SPL_NO_ENV
  14 #define SPL_NO_MISC
  15 #define SPL_NO_QSPI
  16 #define SPL_NO_USB
  17 #define SPL_NO_SATA
  18 #endif
  19 #if (defined(CONFIG_SPL_BUILD) && defined(CONFIG_NAND_BOOT))
  20 #define SPL_NO_MMC
  21 #endif
  22 #if (defined(CONFIG_SPL_BUILD) && defined(CONFIG_SD_BOOT))
  23 #define SPL_NO_IFC
  24 #endif
  25
  26 #define CONFIG_REMAKE_ELF
  27 #define CONFIG_FSL_LAYERSCAPE
  28 #define CONFIG_MP
  29 #define CONFIG_GICV2
  30
  31 #include <asm/arch/config.h>
  32 #include <asm/arch/stream_id_lsch2.h>
  33
  34 /* Link Definitions */
  35 #define CONFIG_SYS_INIT_SP_ADDR         (CONFIG_SYS_FSL_OCRAM_BASE + 0xfff0)
  36
  37 #define CONFIG_SKIP_LOWLEVEL_INIT
  38
  39 #define CONFIG_VERY_BIG_RAM
  40 #define CONFIG_SYS_DDR_SDRAM_BASE       0x80000000
  41 #define CONFIG_SYS_FSL_DDR_SDRAM_BASE_PHY       0
  42 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
  43 #define CONFIG_SYS_DDR_BLOCK2_BASE      0x880000000ULL
  44
  45 #define CPU_RELEASE_ADDR               secondary_boot_func
  46
  47 /* Generic Timer Definitions */
  48 #define COUNTER_FREQUENCY               25000000        /* 25MHz */
  49
  50 /* Size of malloc() pool */
  51 #define CONFIG_SYS_MALLOC_LEN           (CONFIG_ENV_SIZE + 1024 * 1024)
  52
  53 /* Serial Port */
  54 #define CONFIG_SYS_NS16550_SERIAL
  55 #define CONFIG_SYS_NS16550_REG_SIZE     1
  56 #define CONFIG_SYS_NS16550_CLK          (get_serial_clock())
  57
  58 #define CONFIG_SYS_BAUDRATE_TABLE       { 9600, 19200, 38400, 57600, 115200 }
  59
  60 /* SD boot SPL */
  61 #ifdef CONFIG_SD_BOOT
  62 #define CONFIG_SPL_TARGET               "u-boot-with-spl.bin"
  63 #define CONFIG_SPL_LIBCOMMON_SUPPORT
  64 #define CONFIG_SPL_LIBGENERIC_SUPPORT
  65 #define CONFIG_SPL_ENV_SUPPORT
  66 #define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
  67 #define CONFIG_SPL_WATCHDOG_SUPPORT
  68 #define CONFIG_SPL_I2C_SUPPORT
  69 #define CONFIG_SPL_DRIVERS_MISC_SUPPORT
  70
  71 #define CONFIG_SPL_MMC_SUPPORT
  72 #define CONFIG_SPL_TEXT_BASE            0x10000000
  73 #define CONFIG_SPL_MAX_SIZE             0x1f000         /* 124 KiB */
  74 #define CONFIG_SPL_STACK                0x10020000
  75 #define CONFIG_SPL_PAD_TO               0x21000         /* 132 KiB */
  76 #define CONFIG_SPL_BSS_START_ADDR       0x8f000000
  77 #define CONFIG_SPL_BSS_MAX_SIZE         0x80000
  78 #define CONFIG_SYS_SPL_MALLOC_START     (CONFIG_SPL_BSS_START_ADDR + \
  79                                         CONFIG_SPL_BSS_MAX_SIZE)
  80 #define CONFIG_SYS_SPL_MALLOC_SIZE      0x100000
  81
  82 #ifdef CONFIG_SECURE_BOOT
  83 #define CONFIG_U_BOOT_HDR_SIZE                          (16 << 10)
  84 /*
  85  * HDR would be appended at end of image and copied to DDR along
  86  * with U-Boot image. Here u-boot max. size is 512K. So if binary
  87  * size increases then increase this size in case of secure boot as
  88  * it uses raw u-boot image instead of fit image.
  89  */
  90 #define CONFIG_SYS_MONITOR_LEN          (0x100000 + CONFIG_U_BOOT_HDR_SIZE)
  91 #else
  92 #define CONFIG_SYS_MONITOR_LEN          0x100000
  93 #endif /* ifdef CONFIG_SECURE_BOOT */
  94 #endif
  95
  96 /* NAND SPL */
  97 #ifdef CONFIG_NAND_BOOT
  98 #define CONFIG_SPL_PBL_PAD
  99 #define CONFIG_SPL_TARGET               "u-boot-with-spl.bin"
 100 #define CONFIG_SPL_LIBCOMMON_SUPPORT
 101 #define CONFIG_SPL_LIBGENERIC_SUPPORT
 102 #define CONFIG_SPL_ENV_SUPPORT
 103 #define CONFIG_SPL_WATCHDOG_SUPPORT
 104 #define CONFIG_SPL_I2C_SUPPORT
 105 #define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
 106
 107 #define CONFIG_SPL_NAND_SUPPORT
 108 #define CONFIG_SPL_DRIVERS_MISC_SUPPORT
 109 #define CONFIG_SPL_TEXT_BASE            0x10000000
 110 #define CONFIG_SPL_MAX_SIZE             0x17000         /* 90 KiB */
 111 #define CONFIG_SPL_STACK                0x1001f000
 112 #define CONFIG_SYS_NAND_U_BOOT_DST      CONFIG_SYS_TEXT_BASE
 113 #define CONFIG_SYS_NAND_U_BOOT_START    CONFIG_SYS_TEXT_BASE
 114
 115 #define CONFIG_SPL_BSS_START_ADDR       0x8f000000
 116 #define CONFIG_SPL_BSS_MAX_SIZE         0x80000
 117 #define CONFIG_SYS_SPL_MALLOC_START     (CONFIG_SPL_BSS_START_ADDR + \
 118                                         CONFIG_SPL_BSS_MAX_SIZE)
 119 #define CONFIG_SYS_SPL_MALLOC_SIZE      0x100000
 120 #define CONFIG_SYS_MONITOR_LEN          0xa0000
 121 #endif
 122
 123 /* I2C */
 124 #define CONFIG_SYS_I2C
 125
 126 /* PCIe */
 127 #define CONFIG_PCIE1            /* PCIE controller 1 */
 128 #define CONFIG_PCIE2            /* PCIE controller 2 */
 129 #define CONFIG_PCIE3            /* PCIE controller 3 */
 130
 131 #ifdef CONFIG_PCI
 132 #define CONFIG_PCI_SCAN_SHOW
 133 #endif
 134
 135 /* SATA */
 136 #ifndef SPL_NO_SATA
 137 #define CONFIG_SCSI_AHCI_PLAT
 138
 139 #define CONFIG_SYS_SATA                         AHCI_BASE_ADDR
 140
 141 #define CONFIG_SYS_SCSI_MAX_SCSI_ID             1
 142 #define CONFIG_SYS_SCSI_MAX_LUN                 1
 143 #define CONFIG_SYS_SCSI_MAX_DEVICE              (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
 144                                                 CONFIG_SYS_SCSI_MAX_LUN)
 145 #endif
 146
 147 /* Command line configuration */
 148
 149 /* MMC */
 150 #ifndef SPL_NO_MMC
 151 #ifdef CONFIG_MMC
 152 #define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
 153 #endif
 154 #endif
 155
 156 /* FMan ucode */
 157 #ifndef SPL_NO_FMAN
 158 #define CONFIG_SYS_DPAA_FMAN
 159 #ifdef CONFIG_SYS_DPAA_FMAN
 160 #define CONFIG_SYS_FM_MURAM_SIZE        0x60000
 161 #endif
 162
 163 #ifdef CONFIG_SD_BOOT
 164 /*
 165  * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is
 166  * about 1MB (2048 blocks), Env is stored after the image, and the env size is
 167  * 0x2000 (16 blocks), 8 + 2048 + 16 = 2072, enlarge it to 18432(0x4800).
 168  */
 169 #define CONFIG_SYS_QE_FMAN_FW_IN_MMC
 170 #define CONFIG_SYS_FMAN_FW_ADDR         (512 * 0x4800)
 171 #elif defined(CONFIG_QSPI_BOOT)
 172 #define CONFIG_SYS_QE_FW_IN_SPIFLASH
 173 #define CONFIG_SYS_FMAN_FW_ADDR         0x40900000
 174 #define CONFIG_ENV_SPI_BUS              0
 175 #define CONFIG_ENV_SPI_CS               0
 176 #define CONFIG_ENV_SPI_MAX_HZ           1000000
 177 #define CONFIG_ENV_SPI_MODE             0x03
 178 #elif defined(CONFIG_NAND_BOOT)
 179 #define CONFIG_SYS_QE_FMAN_FW_IN_NAND
 180 #define CONFIG_SYS_FMAN_FW_ADDR         (36 * CONFIG_SYS_NAND_BLOCK_SIZE)
 181 #else
 182 #define CONFIG_SYS_QE_FMAN_FW_IN_NOR
 183 #define CONFIG_SYS_FMAN_FW_ADDR         0x60900000
 184 #endif
 185 #define CONFIG_SYS_QE_FMAN_FW_LENGTH    0x10000
 186 #define CONFIG_SYS_FDT_PAD              (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
 187 #endif
 188
 189 /* Miscellaneous configurable options */
 190 #define CONFIG_SYS_LOAD_ADDR    (CONFIG_SYS_DDR_SDRAM_BASE + 0x10000000)
 191
 192 #define CONFIG_HWCONFIG
 193 #define HWCONFIG_BUFFER_SIZE            128
 194
 195 #ifndef CONFIG_SPL_BUILD
 196 #define BOOT_TARGET_DEVICES(func) \
 197         func(SCSI, scsi, 0) \
 198         func(MMC, mmc, 0) \
 199         func(USB, usb, 0)
 200 #include <config_distro_bootcmd.h>
 201 #endif
 202
 203 #ifndef SPL_NO_MISC
 204 /* Initial environment variables */
 205 #define CONFIG_EXTRA_ENV_SETTINGS               \
 206         "hwconfig=fsl_ddr:bank_intlv=auto\0"    \
 207         "ramdisk_addr=0x800000\0"               \
 208         "ramdisk_size=0x2000000\0"              \
 209         "fdt_high=0xffffffffffffffff\0"         \
 210         "initrd_high=0xffffffffffffffff\0"      \
 211         "fdt_addr=0x64f00000\0"                 \
 212         "kernel_addr=0x65000000\0"              \
 213         "scriptaddr=0x80000000\0"               \
 214         "scripthdraddr=0x80080000\0"            \
 215         "fdtheader_addr_r=0x80100000\0"         \
 216         "kernelheader_addr_r=0x80200000\0"      \
 217         "load_addr=0xa0000000\0"            \
 218         "kernel_addr_r=0x81000000\0"            \
 219         "fdt_addr_r=0x90000000\0"               \
 220         "ramdisk_addr_r=0xa0000000\0"           \
 221         "kernel_start=0x1000000\0"              \
 222         "kernelheader_start=0x800000\0"         \
 223         "kernel_load=0xa0000000\0"              \
 224         "kernel_size=0x2800000\0"               \
 225         "kernelheader_size=0x40000\0"           \
 226         "kernel_addr_sd=0x8000\0"               \
 227         "kernel_size_sd=0x14000\0"              \
 228         "kernelhdr_addr_sd=0x4000\0"            \
 229         "kernelhdr_size_sd=0x10\0"              \
 230         "console=ttyS0,115200\0"                \
 231          CONFIG_MTDPARTS_DEFAULT "\0"           \
 232         BOOTENV                                 \
 233         "boot_scripts=ls1046ardb_boot.scr\0"    \
 234         "boot_script_hdr=hdr_ls1046ardb_bs.out\0"       \
 235         "scan_dev_for_boot_part="               \
 236                 "part list ${devtype} ${devnum} devplist; "   \
 237                 "env exists devplist || setenv devplist 1; "  \
 238                 "for distro_bootpart in ${devplist}; do "     \
 239                   "if fstype ${devtype} "                  \
 240                         "${devnum}:${distro_bootpart} "      \
 241                         "bootfstype; then "                  \
 242                         "run scan_dev_for_boot; "            \
 243                   "fi; "                                   \
 244                 "done\0"                                   \
 245         "scan_dev_for_boot="                              \
 246                 "echo Scanning ${devtype} "               \
 247                                 "${devnum}:${distro_bootpart}...; "  \
 248                 "for prefix in ${boot_prefixes}; do "     \
 249                         "run scan_dev_for_scripts; "      \
 250                 "done;"                                   \
 251                 "\0"                                      \
 252         "boot_a_script="                                  \
 253                 "load ${devtype} ${devnum}:${distro_bootpart} "  \
 254                         "${scriptaddr} ${prefix}${script}; "    \
 255                 "env exists secureboot && load ${devtype} "     \
 256                         "${devnum}:${distro_bootpart} "         \
 257                         "${scripthdraddr} ${prefix}${boot_script_hdr} " \
 258                         "&& esbc_validate ${scripthdraddr};"    \
 259                 "source ${scriptaddr}\0"          \
 260         "qspi_bootcmd=echo Trying load from qspi..;"      \
 261                 "sf probe && sf read $load_addr "         \
 262                 "$kernel_start $kernel_size; env exists secureboot "    \
 263                 "&& sf read $kernelheader_addr_r $kernelheader_start "  \
 264                 "$kernelheader_size && esbc_validate ${kernelheader_addr_r}; " \
 265                 "bootm $load_addr#$board\0"             \
 266         "sd_bootcmd=echo Trying load from SD ..;"       \
 267                 "mmcinfo; mmc read $load_addr "         \
 268                 "$kernel_addr_sd $kernel_size_sd && "   \
 269                 "env exists secureboot && mmc read $kernelheader_addr_r "               \
 270                 "$kernelhdr_addr_sd $kernelhdr_size_sd "                \
 271                 " && esbc_validate ${kernelheader_addr_r};"     \
 272                 "bootm $load_addr#$board\0"
 273
 274 #endif
 275
 276 /* Monitor Command Prompt */
 277 #define CONFIG_SYS_CBSIZE               512     /* Console I/O Buffer Size */
 278
 279 #define CONFIG_SYS_MAXARGS              64      /* max command args */
 280
 281 #define CONFIG_SYS_BOOTM_LEN   (64 << 20)      /* Increase max gunzip size */
 282
 283 #include <asm/arch/soc.h>
 284
 285 #endif /* __LS1046A_COMMON_H */