include/configs/ls1046a_common.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright 2016 Freescale Semiconductor
   4  * Copyright 2019-2021 NXP
   5  */
   6
   7 #ifndef __LS1046A_COMMON_H
   8 #define __LS1046A_COMMON_H
   9
  10 /* SPL build */
  11 #ifdef CONFIG_SPL_BUILD
  12 #define SPL_NO_QBMAN
  13 #define SPL_NO_FMAN
  14 #define SPL_NO_ENV
  15 #define SPL_NO_MISC
  16 #define SPL_NO_QSPI
  17 #define SPL_NO_USB
  18 #define SPL_NO_SATA
  19 #endif
  20 #if defined(CONFIG_SPL_BUILD) && \
  21         (defined(CONFIG_NAND_BOOT) || defined(CONFIG_QSPI_BOOT))
  22 #define SPL_NO_MMC
  23 #endif
  24 #if defined(CONFIG_SPL_BUILD)           && \
  25         !defined(CONFIG_SPL_FSL_LS_PPA)
  26 #define SPL_NO_IFC
  27 #endif
  28
  29 #include <asm/arch/config.h>
  30 #include <asm/arch/stream_id_lsch2.h>
  31
  32 /* Link Definitions */
  33
  34 #define CONFIG_VERY_BIG_RAM
  35 #define CONFIG_SYS_DDR_SDRAM_BASE       0x80000000
  36 #define CFG_SYS_FSL_DDR_SDRAM_BASE_PHY  0
  37 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
  38 #define CONFIG_SYS_DDR_BLOCK2_BASE      0x880000000ULL
  39
  40 #define CPU_RELEASE_ADDR               secondary_boot_addr
  41
  42 /* Serial Port */
  43 #define CONFIG_SYS_NS16550_SERIAL
  44 #define CONFIG_SYS_NS16550_REG_SIZE     1
  45 #define CONFIG_SYS_NS16550_CLK          (get_serial_clock())
  46
  47 /* SD boot SPL */
  48 #ifdef CONFIG_SD_BOOT
  49 #ifdef CONFIG_NXP_ESBC
  50 #define CONFIG_U_BOOT_HDR_SIZE                          (16 << 10)
  51 /*
  52  * HDR would be appended at end of image and copied to DDR along
  53  * with U-Boot image. Here u-boot max. size is 512K. So if binary
  54  * size increases then increase this size in case of secure boot as
  55  * it uses raw u-boot image instead of fit image.
  56  */
  57 #endif /* ifdef CONFIG_NXP_ESBC */
  58 #endif
  59
  60 /* NAND SPL */
  61 #ifdef CONFIG_NAND_BOOT
  62 #define CONFIG_SYS_NAND_U_BOOT_DST      CONFIG_TEXT_BASE
  63 #define CONFIG_SYS_NAND_U_BOOT_START    CONFIG_TEXT_BASE
  64 #endif
  65
  66 /* GPIO */
  67
  68 /* I2C */
  69
  70 /* SATA */
  71 #ifndef SPL_NO_SATA
  72 #define CONFIG_SYS_SATA                         AHCI_BASE_ADDR
  73 #endif
  74
  75 /* FMan ucode */
  76 #ifndef SPL_NO_FMAN
  77 #define CONFIG_SYS_DPAA_FMAN
  78 #ifdef CONFIG_SYS_DPAA_FMAN
  79 #define CONFIG_SYS_FM_MURAM_SIZE        0x60000
  80 #endif
  81 #endif
  82
  83 /* Miscellaneous configurable options */
  84
  85 #define CONFIG_HWCONFIG
  86 #define HWCONFIG_BUFFER_SIZE            128
  87
  88 #define BOOT_TARGET_DEVICES(func) \
  89         func(SCSI, scsi, 0) \
  90         func(MMC, mmc, 0) \
  91         func(USB, usb, 0) \
  92         func(DHCP, dhcp, na)
  93 #include <config_distro_bootcmd.h>
  94
  95 #if defined(CONFIG_TARGET_LS1046AFRWY)
  96 #define LS1046A_BOOT_SRC_AND_HDR\
  97         "boot_scripts=ls1046afrwy_boot.scr\0"   \
  98         "boot_script_hdr=hdr_ls1046afrwy_bs.out\0"
  99 #elif defined(CONFIG_TARGET_LS1046AQDS)
 100 #define LS1046A_BOOT_SRC_AND_HDR\
 101         "boot_scripts=ls1046aqds_boot.scr\0"    \
 102         "boot_script_hdr=hdr_ls1046aqds_bs.out\0"
 103 #else
 104 #define LS1046A_BOOT_SRC_AND_HDR\
 105         "boot_scripts=ls1046ardb_boot.scr\0"    \
 106         "boot_script_hdr=hdr_ls1046ardb_bs.out\0"
 107 #endif
 108 #ifndef SPL_NO_MISC
 109 /* Initial environment variables */
 110 #define CONFIG_EXTRA_ENV_SETTINGS               \
 111         "hwconfig=fsl_ddr:bank_intlv=auto\0"    \
 112         "ramdisk_addr=0x800000\0"               \
 113         "ramdisk_size=0x2000000\0"              \
 114         "bootm_size=0x10000000\0"               \
 115         "kernel_addr=0x61000000\0"              \
 116         "scriptaddr=0x80000000\0"               \
 117         "scripthdraddr=0x80080000\0"            \
 118         "fdtheader_addr_r=0x80100000\0"         \
 119         "kernelheader_addr_r=0x80200000\0"      \
 120         "load_addr=0xa0000000\0"            \
 121         "kernel_addr_r=0x81000000\0"            \
 122         "fdt_addr_r=0x90000000\0"               \
 123         "ramdisk_addr_r=0xa0000000\0"           \
 124         "kernel_start=0x1000000\0"              \
 125         "kernelheader_start=0x600000\0"         \
 126         "kernel_load=0xa0000000\0"              \
 127         "kernel_size=0x2800000\0"               \
 128         "kernelheader_size=0x40000\0"           \
 129         "kernel_addr_sd=0x8000\0"               \
 130         "kernel_size_sd=0x14000\0"              \
 131         "kernelhdr_addr_sd=0x3000\0"            \
 132         "kernelhdr_size_sd=0x10\0"              \
 133         "console=ttyS0,115200\0"                \
 134          CONFIG_MTDPARTS_DEFAULT "\0"           \
 135         BOOTENV                                 \
 136         LS1046A_BOOT_SRC_AND_HDR                \
 137         "scan_dev_for_boot_part="               \
 138                 "part list ${devtype} ${devnum} devplist; "   \
 139                 "env exists devplist || setenv devplist 1; "  \
 140                 "for distro_bootpart in ${devplist}; do "     \
 141                   "if fstype ${devtype} "                  \
 142                         "${devnum}:${distro_bootpart} "      \
 143                         "bootfstype; then "                  \
 144                         "run scan_dev_for_boot; "            \
 145                   "fi; "                                   \
 146                 "done\0"                                   \
 147         "boot_a_script="                                  \
 148                 "load ${devtype} ${devnum}:${distro_bootpart} "  \
 149                         "${scriptaddr} ${prefix}${script}; "    \
 150                 "env exists secureboot && load ${devtype} "     \
 151                         "${devnum}:${distro_bootpart} "         \
 152                         "${scripthdraddr} ${prefix}${boot_script_hdr}; " \
 153                         "env exists secureboot "        \
 154                         "&& esbc_validate ${scripthdraddr};"    \
 155                 "source ${scriptaddr}\0"          \
 156         "qspi_bootcmd=echo Trying load from qspi..;"      \
 157                 "sf probe && sf read $load_addr "         \
 158                 "$kernel_start $kernel_size; env exists secureboot "    \
 159                 "&& sf read $kernelheader_addr_r $kernelheader_start "  \
 160                 "$kernelheader_size && esbc_validate ${kernelheader_addr_r}; " \
 161                 "bootm $load_addr#$board\0"             \
 162         "nand_bootcmd=echo Trying load from nand..;"      \
 163                 "nand info; nand read $load_addr "         \
 164                 "$kernel_start $kernel_size; env exists secureboot "    \
 165                 "&& nand read $kernelheader_addr_r $kernelheader_start " \
 166                 "$kernelheader_size && esbc_validate ${kernelheader_addr_r}; " \
 167                 "bootm $load_addr#$board\0"             \
 168         "nor_bootcmd=echo Trying load from nor..;"      \
 169                 "cp.b $kernel_addr $load_addr "         \
 170                 "$kernel_size; env exists secureboot "  \
 171                 "&& cp.b $kernelheader_addr $kernelheader_addr_r "      \
 172                 "$kernelheader_size && esbc_validate ${kernelheader_addr_r}; " \
 173                 "bootm $load_addr#$board\0"     \
 174         "sd_bootcmd=echo Trying load from SD ..;"       \
 175                 "mmcinfo; mmc read $load_addr "         \
 176                 "$kernel_addr_sd $kernel_size_sd && "   \
 177                 "env exists secureboot && mmc read $kernelheader_addr_r "               \
 178                 "$kernelhdr_addr_sd $kernelhdr_size_sd "                \
 179                 " && esbc_validate ${kernelheader_addr_r};"     \
 180                 "bootm $load_addr#$board\0"
 181
 182 #endif
 183
 184 #include <asm/arch/soc.h>
 185
 186 #endif /* __LS1046A_COMMON_H */