include/configs/ls1043a_common.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright (C) 2015 Freescale Semiconductor
   4  * Copyright 2019-2021 NXP
   5  */
   6
   7 #ifndef __LS1043A_COMMON_H
   8 #define __LS1043A_COMMON_H
   9
  10 /* SPL build */
  11 #ifdef CONFIG_SPL_BUILD
  12 #define SPL_NO_FMAN
  13 #define SPL_NO_DSPI
  14 #define SPL_NO_PCIE
  15 #define SPL_NO_ENV
  16 #define SPL_NO_MISC
  17 #define SPL_NO_USB
  18 #define SPL_NO_SATA
  19 #define SPL_NO_QE
  20 #define SPL_NO_EEPROM
  21 #endif
  22 #if (defined(CONFIG_SPL_BUILD) && defined(CONFIG_NAND_BOOT))
  23 #define SPL_NO_MMC
  24 #endif
  25 #if (defined(CONFIG_SPL_BUILD) && defined(CONFIG_SD_BOOT_QSPI))
  26 #define SPL_NO_IFC
  27 #endif
  28
  29 #include <asm/arch/stream_id_lsch2.h>
  30 #include <asm/arch/config.h>
  31
  32 /* Link Definitions */
  33
  34 #define CONFIG_VERY_BIG_RAM
  35 #define CONFIG_SYS_DDR_SDRAM_BASE       0x80000000
  36 #define CONFIG_SYS_FSL_DDR_SDRAM_BASE_PHY       0
  37 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
  38 #define CONFIG_SYS_DDR_BLOCK2_BASE      0x880000000ULL
  39
  40 #define CPU_RELEASE_ADDR               secondary_boot_addr
  41
  42 /* Serial Port */
  43 #define CONFIG_SYS_NS16550_SERIAL
  44 #define CONFIG_SYS_NS16550_REG_SIZE     1
  45 #define CONFIG_SYS_NS16550_CLK          (get_serial_clock())
  46
  47 /* SD boot SPL */
  48 #ifdef CONFIG_SD_BOOT
  49 #ifdef CONFIG_NXP_ESBC
  50 #define CONFIG_U_BOOT_HDR_SIZE                          (16 << 10)
  51 /*
  52  * HDR would be appended at end of image and copied to DDR along
  53  * with U-Boot image. Here u-boot max. size is 512K. So if binary
  54  * size increases then increase this size in case of secure boot as
  55  * it uses raw u-boot image instead of fit image.
  56  */
  57 #define CONFIG_SYS_MONITOR_LEN          (0x100000 + CONFIG_U_BOOT_HDR_SIZE)
  58 #else
  59 #define CONFIG_SYS_MONITOR_LEN          0x100000
  60 #endif /* ifdef CONFIG_NXP_ESBC */
  61 #endif
  62
  63 /* NAND SPL */
  64 #ifdef CONFIG_NAND_BOOT
  65 #define CONFIG_SYS_NAND_U_BOOT_DST      CONFIG_SYS_TEXT_BASE
  66 #define CONFIG_SYS_NAND_U_BOOT_START    CONFIG_SYS_TEXT_BASE
  67
  68 #ifdef CONFIG_NXP_ESBC
  69 #define CONFIG_U_BOOT_HDR_SIZE                          (16 << 10)
  70 #endif /* ifdef CONFIG_NXP_ESBC */
  71
  72 #ifdef CONFIG_U_BOOT_HDR_SIZE
  73 /*
  74  * HDR would be appended at end of image and copied to DDR along
  75  * with U-Boot image. Here u-boot max. size is 512K. So if binary
  76  * size increases then increase this size in case of secure boot as
  77  * it uses raw u-boot image instead of fit image.
  78  */
  79 #define CONFIG_SYS_MONITOR_LEN          (0x100000 + CONFIG_U_BOOT_HDR_SIZE)
  80 #else
  81 #define CONFIG_SYS_MONITOR_LEN          0x100000
  82 #endif /* ifdef CONFIG_U_BOOT_HDR_SIZE */
  83
  84 #endif
  85
  86 /* GPIO */
  87
  88 /* IFC */
  89 #ifndef SPL_NO_IFC
  90 #if defined(CONFIG_TFABOOT) || \
  91         (!defined(CONFIG_QSPI_BOOT) && !defined(CONFIG_SD_BOOT_QSPI))
  92 /*
  93  * CONFIG_SYS_FLASH_BASE has the final address (core view)
  94  * CONFIG_SYS_FLASH_BASE_PHYS has the final address (IFC view)
  95  * CONFIG_SYS_FLASH_BASE_PHYS_EARLY has the temporary IFC address
  96  * CONFIG_SYS_TEXT_BASE is linked to 0x60000000 for booting
  97  */
  98 #define CONFIG_SYS_FLASH_BASE                   0x60000000
  99 #define CONFIG_SYS_FLASH_BASE_PHYS              CONFIG_SYS_FLASH_BASE
 100 #define CONFIG_SYS_FLASH_BASE_PHYS_EARLY        0x00000000
 101
 102 #ifdef CONFIG_MTD_NOR_FLASH
 103 #define CONFIG_SYS_FLASH_QUIET_TEST
 104 #define CONFIG_FLASH_SHOW_PROGRESS      45      /* count down from 45/5: 9..1 */
 105 #endif
 106 #endif
 107 #endif
 108
 109 /* I2C */
 110
 111 /*  DSPI  */
 112
 113 /* FMan ucode */
 114 #ifndef SPL_NO_FMAN
 115 #define CONFIG_SYS_DPAA_FMAN
 116 #ifdef CONFIG_SYS_DPAA_FMAN
 117 #define CONFIG_SYS_FM_MURAM_SIZE        0x60000
 118
 119 #define CONFIG_SYS_FDT_PAD              (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
 120 #endif
 121 #endif
 122
 123 /* Miscellaneous configurable options */
 124
 125 #define CONFIG_HWCONFIG
 126 #define HWCONFIG_BUFFER_SIZE            128
 127
 128 #ifndef SPL_NO_MISC
 129 #define BOOT_TARGET_DEVICES(func) \
 130         func(MMC, mmc, 0) \
 131         func(USB, usb, 0) \
 132         func(DHCP, dhcp, na)
 133 #include <config_distro_bootcmd.h>
 134
 135 /* Initial environment variables */
 136 #define CONFIG_EXTRA_ENV_SETTINGS               \
 137         "hwconfig=fsl_ddr:bank_intlv=auto\0"    \
 138         "fdt_high=0xffffffffffffffff\0"         \
 139         "initrd_high=0xffffffffffffffff\0"      \
 140         "kernel_addr=0x61000000\0"              \
 141         "scriptaddr=0x80000000\0"               \
 142         "scripthdraddr=0x80080000\0"            \
 143         "fdtheader_addr_r=0x80100000\0"         \
 144         "kernelheader_addr_r=0x80200000\0"      \
 145         "kernel_addr_r=0x81000000\0"            \
 146         "kernel_start=0x1000000\0"              \
 147         "kernelheader_start=0x800000\0"         \
 148         "fdt_addr_r=0x90000000\0"               \
 149         "load_addr=0xa0000000\0"                \
 150         "kernelheader_addr=0x60600000\0"        \
 151         "kernel_size=0x2800000\0"               \
 152         "kernelheader_size=0x40000\0"           \
 153         "kernel_addr_sd=0x8000\0"               \
 154         "kernel_size_sd=0x14000\0"              \
 155         "kernelhdr_addr_sd=0x3000\0"            \
 156         "kernelhdr_size_sd=0x10\0"              \
 157         "console=ttyS0,115200\0"                \
 158         "boot_os=y\0"                           \
 159         BOOTENV                                 \
 160         "boot_scripts=ls1043ardb_boot.scr\0"    \
 161         "boot_script_hdr=hdr_ls1043ardb_bs.out\0"       \
 162         "scan_dev_for_boot_part="               \
 163                 "part list ${devtype} ${devnum} devplist; "     \
 164                 "env exists devplist || setenv devplist 1; "    \
 165                 "for distro_bootpart in ${devplist}; do "       \
 166                         "if fstype ${devtype} "                 \
 167                                 "${devnum}:${distro_bootpart} " \
 168                                 "bootfstype; then "             \
 169                                 "run scan_dev_for_boot; "       \
 170                         "fi; "                                  \
 171                 "done\0"                        \
 172         "boot_a_script="                                        \
 173                 "load ${devtype} ${devnum}:${distro_bootpart} " \
 174                         "${scriptaddr} ${prefix}${script}; "    \
 175                 "env exists secureboot && load ${devtype} "     \
 176                         "${devnum}:${distro_bootpart} "         \
 177                         "${scripthdraddr} ${prefix}${boot_script_hdr}; " \
 178                         "env exists secureboot "        \
 179                         "&& esbc_validate ${scripthdraddr};"    \
 180                 "source ${scriptaddr}\0"                        \
 181         "qspi_bootcmd=echo Trying load from qspi..;"    \
 182                 "sf probe && sf read $load_addr "       \
 183                 "$kernel_start $kernel_size; env exists secureboot "    \
 184                 "&& sf read $kernelheader_addr_r $kernelheader_start "  \
 185                 "$kernelheader_size && esbc_validate ${kernelheader_addr_r}; " \
 186                 "bootm $load_addr#$board\0"     \
 187         "nor_bootcmd=echo Trying load from nor..;"      \
 188                 "cp.b $kernel_addr $load_addr " \
 189                 "$kernel_size; env exists secureboot "  \
 190                 "&& cp.b $kernelheader_addr $kernelheader_addr_r "      \
 191                 "$kernelheader_size && esbc_validate ${kernelheader_addr_r}; " \
 192                 "bootm $load_addr#$board\0"         \
 193         "nand_bootcmd=echo Trying load from NAND..;"    \
 194                 "nand info; nand read $load_addr "      \
 195                 "$kernel_start $kernel_size; env exists secureboot "    \
 196                 "&& nand read $kernelheader_addr_r $kernelheader_start "        \
 197                 "$kernelheader_size && esbc_validate ${kernelheader_addr_r}; " \
 198                 "bootm $load_addr#$board\0"     \
 199         "sd_bootcmd=echo Trying load from SD ..;"       \
 200                 "mmcinfo; mmc read $load_addr "         \
 201                 "$kernel_addr_sd $kernel_size_sd && "     \
 202                 "env exists secureboot && mmc read $kernelheader_addr_r "               \
 203                 "$kernelhdr_addr_sd $kernelhdr_size_sd "                \
 204                 " && esbc_validate ${kernelheader_addr_r};"     \
 205                 "bootm $load_addr#$board\0"
 206
 207
 208 #ifdef CONFIG_TFABOOT
 209 #define QSPI_NOR_BOOTCOMMAND "run distro_bootcmd; run qspi_bootcmd; "   \
 210                            "env exists secureboot && esbc_halt;"
 211 #define SD_BOOTCOMMAND "run distro_bootcmd; run sd_bootcmd; "  \
 212                            "env exists secureboot && esbc_halt;"
 213 #define IFC_NOR_BOOTCOMMAND "run distro_bootcmd; run nor_bootcmd; "     \
 214                            "env exists secureboot && esbc_halt;"
 215 #define IFC_NAND_BOOTCOMMAND "run distro_bootcmd; run nand_bootcmd; "   \
 216                            "env exists secureboot && esbc_halt;"
 217 #endif
 218 #endif
 219
 220 #include <asm/arch/soc.h>
 221
 222 #endif /* __LS1043A_COMMON_H */