include/configs/ls1043a_common.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright (C) 2015 Freescale Semiconductor
   4  * Copyright 2019-2021 NXP
   5  */
   6
   7 #ifndef __LS1043A_COMMON_H
   8 #define __LS1043A_COMMON_H
   9
  10 /* SPL build */
  11 #ifdef CONFIG_SPL_BUILD
  12 #define SPL_NO_FMAN
  13 #define SPL_NO_DSPI
  14 #define SPL_NO_PCIE
  15 #define SPL_NO_ENV
  16 #define SPL_NO_MISC
  17 #define SPL_NO_USB
  18 #define SPL_NO_SATA
  19 #define SPL_NO_QE
  20 #define SPL_NO_EEPROM
  21 #endif
  22 #if (defined(CONFIG_SPL_BUILD) && defined(CONFIG_NAND_BOOT))
  23 #define SPL_NO_MMC
  24 #endif
  25 #if (defined(CONFIG_SPL_BUILD) && defined(CONFIG_SD_BOOT_QSPI))
  26 #define SPL_NO_IFC
  27 #endif
  28
  29 #define CONFIG_REMAKE_ELF
  30 #define CONFIG_GICV2
  31
  32 #include <asm/arch/stream_id_lsch2.h>
  33 #include <asm/arch/config.h>
  34
  35 /* Link Definitions */
  36 #ifdef CONFIG_TFABOOT
  37 #define CONFIG_SYS_INIT_SP_ADDR         CONFIG_SYS_TEXT_BASE
  38 #else
  39 #define CONFIG_SYS_INIT_SP_ADDR         (CONFIG_SYS_FSL_OCRAM_BASE + 0xfff0)
  40 #endif
  41
  42 #define CONFIG_SKIP_LOWLEVEL_INIT
  43
  44 #define CONFIG_VERY_BIG_RAM
  45 #define CONFIG_SYS_DDR_SDRAM_BASE       0x80000000
  46 #define CONFIG_SYS_FSL_DDR_SDRAM_BASE_PHY       0
  47 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
  48 #define CONFIG_SYS_DDR_BLOCK2_BASE      0x880000000ULL
  49
  50 #define CPU_RELEASE_ADDR               secondary_boot_addr
  51
  52 /* Generic Timer Definitions */
  53 #define COUNTER_FREQUENCY               25000000        /* 25MHz */
  54
  55 /* Size of malloc() pool */
  56 #define CONFIG_SYS_MALLOC_LEN           (CONFIG_ENV_SIZE + 1024 * 1024)
  57
  58 /* Serial Port */
  59 #define CONFIG_SYS_NS16550_SERIAL
  60 #define CONFIG_SYS_NS16550_REG_SIZE     1
  61 #define CONFIG_SYS_NS16550_CLK          (get_serial_clock())
  62
  63 #define CONFIG_SYS_BAUDRATE_TABLE       { 9600, 19200, 38400, 57600, 115200 }
  64
  65 /* SD boot SPL */
  66 #ifdef CONFIG_SD_BOOT
  67
  68 #define CONFIG_SPL_MAX_SIZE             0x17000
  69 #define CONFIG_SPL_STACK                0x1001e000
  70 #define CONFIG_SPL_PAD_TO               0x1d000
  71
  72 #define CONFIG_SYS_SPL_MALLOC_START     (CONFIG_SPL_BSS_START_ADDR + \
  73                                         CONFIG_SPL_BSS_MAX_SIZE)
  74 #define CONFIG_SYS_SPL_MALLOC_SIZE      0x100000
  75 #define CONFIG_SPL_BSS_START_ADDR       0x8f000000
  76 #define CONFIG_SPL_BSS_MAX_SIZE         0x80000
  77
  78 #ifdef CONFIG_NXP_ESBC
  79 #define CONFIG_U_BOOT_HDR_SIZE                          (16 << 10)
  80 /*
  81  * HDR would be appended at end of image and copied to DDR along
  82  * with U-Boot image. Here u-boot max. size is 512K. So if binary
  83  * size increases then increase this size in case of secure boot as
  84  * it uses raw u-boot image instead of fit image.
  85  */
  86 #define CONFIG_SYS_MONITOR_LEN          (0x100000 + CONFIG_U_BOOT_HDR_SIZE)
  87 #else
  88 #define CONFIG_SYS_MONITOR_LEN          0x100000
  89 #endif /* ifdef CONFIG_NXP_ESBC */
  90 #endif
  91
  92 /* NAND SPL */
  93 #ifdef CONFIG_NAND_BOOT
  94 #define CONFIG_SPL_PBL_PAD
  95 #define CONFIG_SPL_MAX_SIZE             0x1a000
  96 #define CONFIG_SPL_STACK                0x1001d000
  97 #define CONFIG_SYS_NAND_U_BOOT_DST      CONFIG_SYS_TEXT_BASE
  98 #define CONFIG_SYS_NAND_U_BOOT_START    CONFIG_SYS_TEXT_BASE
  99 #define CONFIG_SYS_SPL_MALLOC_START     0x80200000
 100 #define CONFIG_SPL_BSS_START_ADDR       0x80100000
 101 #define CONFIG_SYS_SPL_MALLOC_SIZE      0x100000
 102 #define CONFIG_SPL_BSS_MAX_SIZE         0x80000
 103
 104 #ifdef CONFIG_NXP_ESBC
 105 #define CONFIG_U_BOOT_HDR_SIZE                          (16 << 10)
 106 #endif /* ifdef CONFIG_NXP_ESBC */
 107
 108 #ifdef CONFIG_U_BOOT_HDR_SIZE
 109 /*
 110  * HDR would be appended at end of image and copied to DDR along
 111  * with U-Boot image. Here u-boot max. size is 512K. So if binary
 112  * size increases then increase this size in case of secure boot as
 113  * it uses raw u-boot image instead of fit image.
 114  */
 115 #define CONFIG_SYS_MONITOR_LEN          (0x100000 + CONFIG_U_BOOT_HDR_SIZE)
 116 #else
 117 #define CONFIG_SYS_MONITOR_LEN          0x100000
 118 #endif /* ifdef CONFIG_U_BOOT_HDR_SIZE */
 119
 120 #endif
 121
 122 /* GPIO */
 123 #ifdef CONFIG_DM_GPIO
 124 #ifndef CONFIG_MPC8XXX_GPIO
 125 #define CONFIG_MPC8XXX_GPIO
 126 #endif
 127 #endif
 128
 129 /* IFC */
 130 #ifndef SPL_NO_IFC
 131 #if defined(CONFIG_TFABOOT) || \
 132         (!defined(CONFIG_QSPI_BOOT) && !defined(CONFIG_SD_BOOT_QSPI))
 133 #define CONFIG_FSL_IFC
 134 /*
 135  * CONFIG_SYS_FLASH_BASE has the final address (core view)
 136  * CONFIG_SYS_FLASH_BASE_PHYS has the final address (IFC view)
 137  * CONFIG_SYS_FLASH_BASE_PHYS_EARLY has the temporary IFC address
 138  * CONFIG_SYS_TEXT_BASE is linked to 0x60000000 for booting
 139  */
 140 #define CONFIG_SYS_FLASH_BASE                   0x60000000
 141 #define CONFIG_SYS_FLASH_BASE_PHYS              CONFIG_SYS_FLASH_BASE
 142 #define CONFIG_SYS_FLASH_BASE_PHYS_EARLY        0x00000000
 143
 144 #ifdef CONFIG_MTD_NOR_FLASH
 145 #define CONFIG_SYS_FLASH_QUIET_TEST
 146 #define CONFIG_FLASH_SHOW_PROGRESS      45      /* count down from 45/5: 9..1 */
 147 #endif
 148 #endif
 149 #endif
 150
 151 /* I2C */
 152 #if !CONFIG_IS_ENABLED(DM_I2C)
 153 #define CONFIG_SYS_I2C_LEGACY
 154 #define CONFIG_SYS_I2C_MXC_I2C1         /* enable I2C bus 1 */
 155 #define CONFIG_SYS_I2C_MXC_I2C2         /* enable I2C bus 2 */
 156 #define CONFIG_SYS_I2C_MXC_I2C3         /* enable I2C bus 3 */
 157 #define CONFIG_SYS_I2C_MXC_I2C4         /* enable I2C bus 4 */
 158 #else
 159 #define CONFIG_I2C_SET_DEFAULT_BUS_NUM
 160 #define CONFIG_I2C_DEFAULT_BUS_NUMBER 0
 161 #endif
 162
 163 /* PCIe */
 164 #ifndef SPL_NO_PCIE
 165 #define CONFIG_PCIE1            /* PCIE controller 1 */
 166 #define CONFIG_PCIE2            /* PCIE controller 2 */
 167 #define CONFIG_PCIE3            /* PCIE controller 3 */
 168
 169 #ifdef CONFIG_PCI
 170 #define CONFIG_PCI_SCAN_SHOW
 171 #endif
 172 #endif
 173
 174 /*  DSPI  */
 175 #ifndef SPL_NO_DSPI
 176 #ifdef CONFIG_FSL_DSPI
 177 #define CONFIG_SPI_FLASH_STMICRO        /* cs0 */
 178 #define CONFIG_SPI_FLASH_SST            /* cs1 */
 179 #define CONFIG_SPI_FLASH_EON            /* cs2 */
 180 #endif
 181 #endif
 182
 183 /* FMan ucode */
 184 #ifndef SPL_NO_FMAN
 185 #define CONFIG_SYS_DPAA_FMAN
 186 #ifdef CONFIG_SYS_DPAA_FMAN
 187 #define CONFIG_SYS_FM_MURAM_SIZE        0x60000
 188
 189 #ifdef CONFIG_TFABOOT
 190 #define CONFIG_SYS_FMAN_FW_ADDR         0x900000
 191 #define CONFIG_SYS_QE_FW_ADDR           0x940000
 192
 193
 194 #else
 195 #ifdef CONFIG_NAND_BOOT
 196 /* Store Fman ucode at offeset 0x900000(72 blocks). */
 197 #define CONFIG_SYS_FMAN_FW_ADDR         (72 * CONFIG_SYS_NAND_BLOCK_SIZE)
 198 #elif defined(CONFIG_SD_BOOT)
 199 /*
 200  * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is
 201  * about 1MB (2040 blocks), Env is stored after the image, and the env size is
 202  * 0x2000 (16 blocks), 8 + 2040 + 16 = 2064, enlarge it to 18432(0x4800).
 203  */
 204 #define CONFIG_SYS_FMAN_FW_ADDR         (512 * 0x4800)
 205 #define CONFIG_SYS_QE_FW_ADDR           (512 * 0x4A00)
 206 #elif defined(CONFIG_QSPI_BOOT)
 207 #define CONFIG_SYS_FMAN_FW_ADDR         0x40900000
 208 #else
 209 /* FMan fireware Pre-load address */
 210 #define CONFIG_SYS_FMAN_FW_ADDR         0x60900000
 211 #define CONFIG_SYS_QE_FW_ADDR           0x60940000
 212 #endif
 213 #endif
 214 #define CONFIG_SYS_QE_FMAN_FW_LENGTH    0x10000
 215 #define CONFIG_SYS_FDT_PAD              (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
 216 #endif
 217 #endif
 218
 219 /* Miscellaneous configurable options */
 220 #define CONFIG_SYS_LOAD_ADDR    (CONFIG_SYS_DDR_SDRAM_BASE + 0x10000000)
 221
 222 #define CONFIG_HWCONFIG
 223 #define HWCONFIG_BUFFER_SIZE            128
 224
 225 #ifndef SPL_NO_MISC
 226 #ifndef CONFIG_SPL_BUILD
 227 #define BOOT_TARGET_DEVICES(func) \
 228         func(MMC, mmc, 0) \
 229         func(USB, usb, 0) \
 230         func(DHCP, dhcp, na)
 231 #include <config_distro_bootcmd.h>
 232 #endif
 233
 234 /* Initial environment variables */
 235 #define CONFIG_EXTRA_ENV_SETTINGS               \
 236         "hwconfig=fsl_ddr:bank_intlv=auto\0"    \
 237         "fdt_high=0xffffffffffffffff\0"         \
 238         "initrd_high=0xffffffffffffffff\0"      \
 239         "fdt_addr=0x64f00000\0"                 \
 240         "kernel_addr=0x61000000\0"              \
 241         "scriptaddr=0x80000000\0"               \
 242         "scripthdraddr=0x80080000\0"            \
 243         "fdtheader_addr_r=0x80100000\0"         \
 244         "kernelheader_addr_r=0x80200000\0"      \
 245         "kernel_addr_r=0x81000000\0"            \
 246         "kernel_start=0x1000000\0"              \
 247         "kernelheader_start=0x800000\0"         \
 248         "fdt_addr_r=0x90000000\0"               \
 249         "load_addr=0xa0000000\0"                \
 250         "kernelheader_addr=0x60600000\0"        \
 251         "kernel_size=0x2800000\0"               \
 252         "kernelheader_size=0x40000\0"           \
 253         "kernel_addr_sd=0x8000\0"               \
 254         "kernel_size_sd=0x14000\0"              \
 255         "kernelhdr_addr_sd=0x3000\0"            \
 256         "kernelhdr_size_sd=0x10\0"              \
 257         "console=ttyS0,115200\0"                \
 258         "boot_os=y\0"                           \
 259         "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0"        \
 260         BOOTENV                                 \
 261         "boot_scripts=ls1043ardb_boot.scr\0"    \
 262         "boot_script_hdr=hdr_ls1043ardb_bs.out\0"       \
 263         "scan_dev_for_boot_part="               \
 264                 "part list ${devtype} ${devnum} devplist; "     \
 265                 "env exists devplist || setenv devplist 1; "    \
 266                 "for distro_bootpart in ${devplist}; do "       \
 267                         "if fstype ${devtype} "                 \
 268                                 "${devnum}:${distro_bootpart} " \
 269                                 "bootfstype; then "             \
 270                                 "run scan_dev_for_boot; "       \
 271                         "fi; "                                  \
 272                 "done\0"                        \
 273         "boot_a_script="                                        \
 274                 "load ${devtype} ${devnum}:${distro_bootpart} " \
 275                         "${scriptaddr} ${prefix}${script}; "    \
 276                 "env exists secureboot && load ${devtype} "     \
 277                         "${devnum}:${distro_bootpart} "         \
 278                         "${scripthdraddr} ${prefix}${boot_script_hdr}; " \
 279                         "env exists secureboot "        \
 280                         "&& esbc_validate ${scripthdraddr};"    \
 281                 "source ${scriptaddr}\0"                        \
 282         "qspi_bootcmd=echo Trying load from qspi..;"    \
 283                 "sf probe && sf read $load_addr "       \
 284                 "$kernel_start $kernel_size; env exists secureboot "    \
 285                 "&& sf read $kernelheader_addr_r $kernelheader_start "  \
 286                 "$kernelheader_size && esbc_validate ${kernelheader_addr_r}; " \
 287                 "bootm $load_addr#$board\0"     \
 288         "nor_bootcmd=echo Trying load from nor..;"      \
 289                 "cp.b $kernel_addr $load_addr " \
 290                 "$kernel_size; env exists secureboot "  \
 291                 "&& cp.b $kernelheader_addr $kernelheader_addr_r "      \
 292                 "$kernelheader_size && esbc_validate ${kernelheader_addr_r}; " \
 293                 "bootm $load_addr#$board\0"         \
 294         "nand_bootcmd=echo Trying load from NAND..;"    \
 295                 "nand info; nand read $load_addr "      \
 296                 "$kernel_start $kernel_size; env exists secureboot "    \
 297                 "&& nand read $kernelheader_addr_r $kernelheader_start "        \
 298                 "$kernelheader_size && esbc_validate ${kernelheader_addr_r}; " \
 299                 "bootm $load_addr#$board\0"     \
 300         "sd_bootcmd=echo Trying load from SD ..;"       \
 301                 "mmcinfo; mmc read $load_addr "         \
 302                 "$kernel_addr_sd $kernel_size_sd && "     \
 303                 "env exists secureboot && mmc read $kernelheader_addr_r "               \
 304                 "$kernelhdr_addr_sd $kernelhdr_size_sd "                \
 305                 " && esbc_validate ${kernelheader_addr_r};"     \
 306                 "bootm $load_addr#$board\0"
 307
 308
 309 #undef CONFIG_BOOTCOMMAND
 310 #ifdef CONFIG_TFABOOT
 311 #define QSPI_NOR_BOOTCOMMAND "run distro_bootcmd; run qspi_bootcmd; "   \
 312                            "env exists secureboot && esbc_halt;"
 313 #define SD_BOOTCOMMAND "run distro_bootcmd; run sd_bootcmd; "  \
 314                            "env exists secureboot && esbc_halt;"
 315 #define IFC_NOR_BOOTCOMMAND "run distro_bootcmd; run nor_bootcmd; "     \
 316                            "env exists secureboot && esbc_halt;"
 317 #define IFC_NAND_BOOTCOMMAND "run distro_bootcmd; run nand_bootcmd; "   \
 318                            "env exists secureboot && esbc_halt;"
 319 #else
 320 #if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
 321 #define CONFIG_BOOTCOMMAND "run distro_bootcmd; run qspi_bootcmd; "     \
 322                            "env exists secureboot && esbc_halt;"
 323 #elif defined(CONFIG_SD_BOOT)
 324 #define CONFIG_BOOTCOMMAND "run distro_bootcmd; run sd_bootcmd; "  \
 325                            "env exists secureboot && esbc_halt;"
 326 #else
 327 #define CONFIG_BOOTCOMMAND "run distro_bootcmd; run nor_bootcmd; "      \
 328                            "env exists secureboot && esbc_halt;"
 329 #endif
 330 #endif
 331 #endif
 332
 333 /* Monitor Command Prompt */
 334 #define CONFIG_SYS_CBSIZE               512     /* Console I/O Buffer Size */
 335
 336 #define CONFIG_SYS_MAXARGS              64      /* max command args */
 337
 338 #define CONFIG_SYS_BOOTM_LEN   (64 << 20)      /* Increase max gunzip size */
 339
 340 #include <asm/arch/soc.h>
 341
 342 #endif /* __LS1043A_COMMON_H */