configs: migrate CONFIG_BMP_16/24/32BPP to defconfigs
[platform/kernel/u-boot.git] / include / configs / ls1028a_common.h
1 /* SPDX-License-Identifier: GPL-2.0+ */
2 /*
3  * Copyright 2019-2020 NXP
4  */
5
6 #ifndef __L1028A_COMMON_H
7 #define __L1028A_COMMON_H
8
9 #define CONFIG_REMAKE_ELF
10 #define CONFIG_MP
11
12 #include <asm/arch/stream_id_lsch3.h>
13 #include <asm/arch/config.h>
14 #include <asm/arch/soc.h>
15
16 /* Link Definitions */
17 #define CONFIG_SYS_INIT_SP_ADDR         CONFIG_SYS_TEXT_BASE
18
19 #define CONFIG_SKIP_LOWLEVEL_INIT
20
21 #define CONFIG_VERY_BIG_RAM
22 #define CONFIG_SYS_DDR_SDRAM_BASE       0x80000000UL
23 #define CONFIG_SYS_FSL_DDR_SDRAM_BASE_PHY       0
24 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
25 #define CONFIG_SYS_DDR_BLOCK2_BASE      0x2080000000ULL
26 #define CONFIG_SYS_FSL_DDR_MAIN_NUM_CTRLS       1
27
28 /*
29  * SMP Definitinos
30  */
31 #define CPU_RELEASE_ADDR                secondary_boot_addr
32
33 /* Generic Timer Definitions */
34 #define COUNTER_FREQUENCY               25000000        /* 25MHz */
35
36 /* Size of malloc() pool */
37 #define CONFIG_SYS_MALLOC_LEN           (CONFIG_ENV_SIZE + 2048 * 1024)
38
39 /* I2C */
40 #ifndef CONFIG_DM_I2C
41 #define CONFIG_SYS_I2C
42 #endif
43
44 /* Serial Port */
45 #define CONFIG_SYS_NS16550_SERIAL
46 #define CONFIG_SYS_NS16550_REG_SIZE     1
47 #define CONFIG_SYS_NS16550_CLK          (get_bus_freq(0) / 2)
48
49 #define CONFIG_SYS_BAUDRATE_TABLE       { 9600, 19200, 38400, 57600, 115200 }
50
51 /* Miscellaneous configurable options */
52 #define CONFIG_SYS_LOAD_ADDR    (CONFIG_SYS_DDR_SDRAM_BASE + 0x10000000)
53
54 /* Physical Memory Map */
55 #define CONFIG_CHIP_SELECTS_PER_CTRL    4
56
57 #define CONFIG_HWCONFIG
58 #define HWCONFIG_BUFFER_SIZE            128
59
60 #define BOOT_TARGET_DEVICES(func) \
61         func(MMC, mmc, 0) \
62         func(MMC, mmc, 1) \
63         func(USB, usb, 0) \
64         func(DHCP, dhcp, na)
65 #include <config_distro_bootcmd.h>
66
67 #undef CONFIG_BOOTCOMMAND
68
69 #define XSPI_NOR_BOOTCOMMAND    \
70         "run xspi_hdploadcmd; run distro_bootcmd; run xspi_bootcmd; " \
71         "env exists secureboot && esbc_halt;;"
72 #define SD_BOOTCOMMAND  \
73         "run sd_hdploadcmd; run distro_bootcmd;run sd_bootcmd; " \
74         "env exists secureboot && esbc_halt;"
75 #define SD2_BOOTCOMMAND \
76         "run emmc_hdploadcmd; run distro_bootcmd;run emmc_bootcmd; " \
77         "env exists secureboot && esbc_halt;"
78
79 /* Monitor Command Prompt */
80 #define CONFIG_SYS_CBSIZE               512     /* Console I/O Buffer Size */
81 #define CONFIG_SYS_PBSIZE               (CONFIG_SYS_CBSIZE + \
82                                         sizeof(CONFIG_SYS_PROMPT) + 16)
83 #define CONFIG_SYS_BARGSIZE             CONFIG_SYS_CBSIZE /* Boot args buffer */
84
85 #define CONFIG_SYS_MAXARGS              64      /* max command args */
86
87 #define CONFIG_SYS_BOOTM_LEN   (64 << 20)      /* Increase max gunzip size */
88
89 /*  MMC  */
90 #ifdef CONFIG_MMC
91 #define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
92 #endif
93
94 #define OCRAM_NONSECURE_SIZE            0x00010000
95 #define CONFIG_SYS_FSL_QSPI_BASE        0x20000000
96
97 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
98
99 /* I2C bus multiplexer */
100 #define I2C_MUX_PCA_ADDR_PRI            0x77 /* Primary Mux*/
101 #define I2C_MUX_CH_DEFAULT              0x8
102
103 /* EEPROM */
104 #define CONFIG_ID_EEPROM
105 #define CONFIG_SYS_I2C_EEPROM_NXID
106 #define CONFIG_SYS_EEPROM_BUS_NUM               0
107 #define CONFIG_SYS_I2C_EEPROM_ADDR              0x57
108 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN          1
109 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS       3
110 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS   5
111
112 /* DisplayPort */
113 #define DP_PWD_EN_DEFAULT_MASK          0x8
114
115 #ifdef CONFIG_NXP_ESBC
116 #include <asm/fsl_secure_boot.h>
117 #endif
118
119 /* Ethernet */
120 /* smallest ENETC BD ring has 8 entries */
121 #define CONFIG_SYS_RX_ETH_BUFFER                8
122
123 #endif /* __L1028A_COMMON_H */