1 /* SPDX-License-Identifier: GPL-2.0+ */
3 * Copyright 2014 Freescale Semiconductor, Inc.
4 * Copyright 2019, 2021 NXP
10 #define CONFIG_SYS_INIT_RAM_ADDR OCRAM_BASE_ADDR
11 #define CONFIG_SYS_INIT_RAM_SIZE OCRAM_SIZE
13 #define DDR_SDRAM_CFG 0x470c0008
14 #define DDR_CS0_BNDS 0x008000bf
15 #define DDR_CS0_CONFIG 0x80014302
16 #define DDR_TIMING_CFG_0 0x50550004
17 #define DDR_TIMING_CFG_1 0xbcb38c56
18 #define DDR_TIMING_CFG_2 0x0040d120
19 #define DDR_TIMING_CFG_3 0x010e1000
20 #define DDR_TIMING_CFG_4 0x00000001
21 #define DDR_TIMING_CFG_5 0x03401400
22 #define DDR_SDRAM_CFG_2 0x00401010
23 #define DDR_SDRAM_MODE 0x00061c60
24 #define DDR_SDRAM_MODE_2 0x00180000
25 #define DDR_SDRAM_INTERVAL 0x18600618
26 #define DDR_DDR_WRLVL_CNTL 0x8655f605
27 #define DDR_DDR_WRLVL_CNTL_2 0x05060607
28 #define DDR_DDR_WRLVL_CNTL_3 0x05050505
29 #define DDR_DDR_CDR1 0x80040000
30 #define DDR_DDR_CDR2 0x00000001
31 #define DDR_SDRAM_CLK_CNTL 0x02000000
32 #define DDR_DDR_ZQ_CNTL 0x89080600
33 #define DDR_CS0_CONFIG_2 0
34 #define DDR_SDRAM_CFG_MEM_EN 0x80000000
35 #define SDRAM_CFG2_D_INIT 0x00000010
36 #define DDR_CDR2_VREF_TRAIN_EN 0x00000080
37 #define SDRAM_CFG2_FRC_SR 0x80000000
38 #define SDRAM_CFG_BI 0x00000001
41 #ifdef CONFIG_NXP_ESBC
43 * HDR would be appended at end of image and copied to DDR along
46 #define CONFIG_U_BOOT_HDR_SIZE (16 << 10)
47 #endif /* ifdef CONFIG_NXP_ESBC */
49 #ifdef CONFIG_U_BOOT_HDR_SIZE
51 * HDR would be appended at end of image and copied to DDR along
52 * with U-Boot image. Here u-boot max. size is 512K. So if binary
53 * size increases then increase this size in case of secure boot as
54 * it uses raw u-boot image instead of fit image.
56 #define CONFIG_SYS_MONITOR_LEN (0x100000 + CONFIG_U_BOOT_HDR_SIZE)
58 #define CONFIG_SYS_MONITOR_LEN 0x100000
59 #endif /* ifdef CONFIG_U_BOOT_HDR_SIZE */
62 #define PHYS_SDRAM 0x80000000
63 #define PHYS_SDRAM_SIZE (1u * 1024 * 1024 * 1024)
65 #define CONFIG_SYS_DDR_SDRAM_BASE 0x80000000UL
66 #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE
71 #if !defined(CONFIG_QSPI_BOOT) && !defined(CONFIG_SD_BOOT_QSPI)
72 #define CONFIG_SYS_FLASH_BASE 0x60000000
73 #define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE
75 #define CONFIG_SYS_NOR0_CSPR_EXT (0x0)
76 #define CONFIG_SYS_NOR0_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \
80 #define CONFIG_SYS_NOR_AMASK IFC_AMASK(128 * 1024 * 1024)
82 /* NOR Flash Timing Params */
83 #define CONFIG_SYS_NOR_CSOR (CSOR_NOR_ADM_SHIFT(4) | \
85 #define CONFIG_SYS_NOR_FTIM0 (FTIM0_NOR_TACSE(0x4) | \
86 FTIM0_NOR_TEADC(0x5) | \
87 FTIM0_NOR_TAVDS(0x0) | \
89 #define CONFIG_SYS_NOR_FTIM1 (FTIM1_NOR_TACO(0x35) | \
90 FTIM1_NOR_TRAD_NOR(0x1A) | \
91 FTIM1_NOR_TSEQRAD_NOR(0x13))
92 #define CONFIG_SYS_NOR_FTIM2 (FTIM2_NOR_TCS(0x4) | \
93 FTIM2_NOR_TCH(0x4) | \
94 FTIM2_NOR_TWP(0x1c) | \
96 #define CONFIG_SYS_NOR_FTIM3 0
98 #define CONFIG_SYS_FLASH_QUIET_TEST
99 #define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */
101 #define CONFIG_SYS_MAX_FLASH_SECT 1024 /* sectors per device */
102 #define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */
103 #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */
105 #define CONFIG_SYS_FLASH_EMPTY_INFO
106 #define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE_PHYS }
108 #define CONFIG_SYS_WRITE_SWAPPED_DATA
113 #define CONFIG_SYS_CPLD_BASE 0x7fb00000
114 #define CPLD_BASE_PHYS CONFIG_SYS_CPLD_BASE
116 #define CONFIG_SYS_FPGA_CSPR_EXT (0x0)
117 #define CONFIG_SYS_FPGA_CSPR (CSPR_PHYS_ADDR(CPLD_BASE_PHYS) | \
121 #define CONFIG_SYS_FPGA_AMASK IFC_AMASK(64 * 1024)
122 #define CONFIG_SYS_FPGA_CSOR (CSOR_NOR_ADM_SHIFT(4) | \
123 CSOR_NOR_NOR_MODE_AVD_NOR | \
126 /* CPLD Timing parameters for IFC GPCM */
127 #define CONFIG_SYS_FPGA_FTIM0 (FTIM0_GPCM_TACSE(0xf) | \
128 FTIM0_GPCM_TEADC(0xf) | \
129 FTIM0_GPCM_TEAHC(0xf))
130 #define CONFIG_SYS_FPGA_FTIM1 (FTIM1_GPCM_TACO(0xff) | \
131 FTIM1_GPCM_TRAD(0x3f))
132 #define CONFIG_SYS_FPGA_FTIM2 (FTIM2_GPCM_TCS(0xf) | \
133 FTIM2_GPCM_TCH(0xf) | \
134 FTIM2_GPCM_TWP(0xff))
135 #define CONFIG_SYS_FPGA_FTIM3 0x0
136 #define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NOR0_CSPR_EXT
137 #define CONFIG_SYS_CSPR0 CONFIG_SYS_NOR0_CSPR
138 #define CONFIG_SYS_AMASK0 CONFIG_SYS_NOR_AMASK
139 #define CONFIG_SYS_CSOR0 CONFIG_SYS_NOR_CSOR
140 #define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NOR_FTIM0
141 #define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NOR_FTIM1
142 #define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NOR_FTIM2
143 #define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NOR_FTIM3
144 #define CONFIG_SYS_CSPR1_EXT CONFIG_SYS_FPGA_CSPR_EXT
145 #define CONFIG_SYS_CSPR1 CONFIG_SYS_FPGA_CSPR
146 #define CONFIG_SYS_AMASK1 CONFIG_SYS_FPGA_AMASK
147 #define CONFIG_SYS_CSOR1 CONFIG_SYS_FPGA_CSOR
148 #define CONFIG_SYS_CS1_FTIM0 CONFIG_SYS_FPGA_FTIM0
149 #define CONFIG_SYS_CS1_FTIM1 CONFIG_SYS_FPGA_FTIM1
150 #define CONFIG_SYS_CS1_FTIM2 CONFIG_SYS_FPGA_FTIM2
151 #define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_FPGA_FTIM3
156 #ifndef CONFIG_LPUART
157 #define CONFIG_SYS_NS16550_SERIAL
158 #ifndef CONFIG_DM_SERIAL
159 #define CONFIG_SYS_NS16550_REG_SIZE 1
161 #define CONFIG_SYS_NS16550_CLK get_serial_clock()
171 #define CONFIG_SYS_I2C_EEPROM_NXID
172 #define CONFIG_SYS_EEPROM_BUS_NUM 1
175 #define CONFIG_PCIE1 /* PCIE controller 1 */
176 #define CONFIG_PCIE2 /* PCIE controller 2 */
179 #define CONFIG_PCI_SCAN_SHOW
182 #define CONFIG_PEN_ADDR_BIG_ENDIAN
183 #define CONFIG_SMP_PEN_ADDR 0x01ee0200
185 #define CONFIG_HWCONFIG
186 #define HWCONFIG_BUFFER_SIZE 256
188 #define CONFIG_FSL_DEVICE_DISABLE
190 #define BOOT_TARGET_DEVICES(func) \
194 #include <config_distro_bootcmd.h>
197 #define CONFIG_EXTRA_ENV_SETTINGS \
198 "bootargs=root=/dev/ram0 rw console=ttyLP0,115200 " \
199 "cma=64M@0x0-0xb0000000\0" \
200 "initrd_high=0xffffffff\0" \
201 "kernel_addr=0x65000000\0" \
202 "scriptaddr=0x80000000\0" \
203 "scripthdraddr=0x80080000\0" \
204 "fdtheader_addr_r=0x80100000\0" \
205 "kernelheader_addr_r=0x80200000\0" \
206 "kernel_addr_r=0x81000000\0" \
207 "fdt_addr_r=0x90000000\0" \
208 "ramdisk_addr_r=0xa0000000\0" \
209 "load_addr=0xa0000000\0" \
210 "kernel_size=0x2800000\0" \
211 "kernel_addr_sd=0x8000\0" \
212 "kernel_size_sd=0x14000\0" \
213 "othbootargs=cma=64M@0x0-0xb0000000\0" \
215 "boot_scripts=ls1021atwr_boot.scr\0" \
216 "boot_script_hdr=hdr_ls1021atwr_bs.out\0" \
217 "scan_dev_for_boot_part=" \
218 "part list ${devtype} ${devnum} devplist; " \
219 "env exists devplist || setenv devplist 1; " \
220 "for distro_bootpart in ${devplist}; do " \
221 "if fstype ${devtype} " \
222 "${devnum}:${distro_bootpart} " \
223 "bootfstype; then " \
224 "run scan_dev_for_boot; " \
227 "scan_dev_for_boot=" \
228 "echo Scanning ${devtype} " \
229 "${devnum}:${distro_bootpart}...; " \
230 "for prefix in ${boot_prefixes}; do " \
231 "run scan_dev_for_scripts; " \
235 "load ${devtype} ${devnum}:${distro_bootpart} " \
236 "${scriptaddr} ${prefix}${script}; " \
237 "env exists secureboot && load ${devtype} " \
238 "${devnum}:${distro_bootpart} " \
239 "${scripthdraddr} ${prefix}${boot_script_hdr}; " \
240 "env exists secureboot " \
241 "&& esbc_validate ${scripthdraddr};" \
242 "source ${scriptaddr}\0" \
243 "installer=load mmc 0:2 $load_addr " \
244 "/flex_installer_arm32.itb; " \
245 "bootm $load_addr#ls1021atwr\0" \
246 "qspi_bootcmd=echo Trying load from qspi..;" \
247 "sf probe && sf read $load_addr " \
248 "$kernel_addr $kernel_size && bootm $load_addr#$board\0" \
249 "nor_bootcmd=echo Trying load from nor..;" \
250 "cp.b $kernel_addr $load_addr " \
251 "$kernel_size && bootm $load_addr#$board\0"
253 #define CONFIG_EXTRA_ENV_SETTINGS \
254 "bootargs=root=/dev/ram0 rw console=ttyS0,115200 " \
255 "cma=64M@0x0-0xb0000000\0" \
256 "initrd_high=0xffffffff\0" \
257 "kernel_addr=0x61000000\0" \
258 "kernelheader_addr=0x60800000\0" \
259 "scriptaddr=0x80000000\0" \
260 "scripthdraddr=0x80080000\0" \
261 "fdtheader_addr_r=0x80100000\0" \
262 "kernelheader_addr_r=0x80200000\0" \
263 "kernel_addr_r=0x81000000\0" \
264 "kernelheader_size=0x40000\0" \
265 "fdt_addr_r=0x90000000\0" \
266 "ramdisk_addr_r=0xa0000000\0" \
267 "load_addr=0xa0000000\0" \
268 "kernel_size=0x2800000\0" \
269 "kernel_addr_sd=0x8000\0" \
270 "kernel_size_sd=0x14000\0" \
271 "kernelhdr_addr_sd=0x4000\0" \
272 "kernelhdr_size_sd=0x10\0" \
273 "othbootargs=cma=64M@0x0-0xb0000000\0" \
275 "boot_scripts=ls1021atwr_boot.scr\0" \
276 "boot_script_hdr=hdr_ls1021atwr_bs.out\0" \
277 "scan_dev_for_boot_part=" \
278 "part list ${devtype} ${devnum} devplist; " \
279 "env exists devplist || setenv devplist 1; " \
280 "for distro_bootpart in ${devplist}; do " \
281 "if fstype ${devtype} " \
282 "${devnum}:${distro_bootpart} " \
283 "bootfstype; then " \
284 "run scan_dev_for_boot; " \
287 "scan_dev_for_boot=" \
288 "echo Scanning ${devtype} " \
289 "${devnum}:${distro_bootpart}...; " \
290 "for prefix in ${boot_prefixes}; do " \
291 "run scan_dev_for_scripts; " \
295 "load ${devtype} ${devnum}:${distro_bootpart} " \
296 "${scriptaddr} ${prefix}${script}; " \
297 "env exists secureboot && load ${devtype} " \
298 "${devnum}:${distro_bootpart} " \
299 "${scripthdraddr} ${prefix}${boot_script_hdr} " \
300 "&& esbc_validate ${scripthdraddr};" \
301 "source ${scriptaddr}\0" \
302 "qspi_bootcmd=echo Trying load from qspi..;" \
303 "sf probe && sf read $load_addr " \
304 "$kernel_addr $kernel_size; env exists secureboot " \
305 "&& sf read $kernelheader_addr_r $kernelheader_addr " \
306 "$kernelheader_size && esbc_validate ${kernelheader_addr_r}; " \
307 "bootm $load_addr#$board\0" \
308 "nor_bootcmd=echo Trying load from nor..;" \
309 "cp.b $kernel_addr $load_addr " \
310 "$kernel_size; env exists secureboot " \
311 "&& cp.b $kernelheader_addr $kernelheader_addr_r " \
312 "$kernelheader_size && esbc_validate ${kernelheader_addr_r}; " \
313 "bootm $load_addr#$board\0" \
314 "sd_bootcmd=echo Trying load from SD ..;" \
315 "mmcinfo && mmc read $load_addr " \
316 "$kernel_addr_sd $kernel_size_sd && " \
317 "env exists secureboot && mmc read $kernelheader_addr_r " \
318 "$kernelhdr_addr_sd $kernelhdr_size_sd " \
319 " && esbc_validate ${kernelheader_addr_r};" \
320 "bootm $load_addr#$board\0"
324 * Miscellaneous configurable options
326 #define CONFIG_SYS_BOOTMAPSZ (256 << 20)
328 #define CONFIG_LS102XA_STREAM_ID
334 #include <asm/fsl_secure_boot.h>
335 #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */