dm: arm: ls1021a: add i2c DM support
[platform/kernel/u-boot.git] / include / configs / ls1021aiot.h
1 /* SPDX-License-Identifier: GPL-2.0+ */
2 /*
3  * Copyright 2016 Freescale Semiconductor, Inc.
4  * Copyright 2019 NXP
5  */
6
7 #ifndef __CONFIG_H
8 #define __CONFIG_H
9
10 #define CONFIG_ARMV7_SECURE_BASE OCRAM_BASE_S_ADDR
11
12 #define CONFIG_SYS_FSL_CLK
13
14 /*
15  * Size of malloc() pool
16  */
17 #define CONFIG_SYS_MALLOC_LEN   (CONFIG_ENV_SIZE + 16 * 1024 * 1024)
18
19 #define CONFIG_SYS_INIT_RAM_ADDR        OCRAM_BASE_ADDR
20 #define CONFIG_SYS_INIT_RAM_SIZE        OCRAM_SIZE
21
22 #define CONFIG_SYS_CLK_FREQ             100000000
23 #define CONFIG_DDR_CLK_FREQ             100000000
24
25 /*
26  * DDR: 800 MHz ( 1600 MT/s data rate )
27  */
28
29 #define DDR_SDRAM_CFG                   0x470c0008
30 #define DDR_CS0_BNDS                    0x008000bf
31 #define DDR_CS0_CONFIG                  0x80014302
32 #define DDR_TIMING_CFG_0                0x50550004
33 #define DDR_TIMING_CFG_1                0xbcb38c56
34 #define DDR_TIMING_CFG_2                0x0040d120
35 #define DDR_TIMING_CFG_3                0x010e1000
36 #define DDR_TIMING_CFG_4                0x00000001
37 #define DDR_TIMING_CFG_5                0x03401400
38 #define DDR_SDRAM_CFG_2                 0x00401010
39 #define DDR_SDRAM_MODE                  0x00061c60
40 #define DDR_SDRAM_MODE_2                0x00180000
41 #define DDR_SDRAM_INTERVAL              0x18600618
42 #define DDR_DDR_WRLVL_CNTL              0x8655f605
43 #define DDR_DDR_WRLVL_CNTL_2    0x05060607
44 #define DDR_DDR_WRLVL_CNTL_3    0x05050505
45 #define DDR_DDR_CDR1                    0x80040000
46 #define DDR_DDR_CDR2                    0x00000001
47 #define DDR_SDRAM_CLK_CNTL              0x02000000
48 #define DDR_DDR_ZQ_CNTL                 0x89080600
49 #define DDR_CS0_CONFIG_2                0
50 #define DDR_SDRAM_CFG_MEM_EN    0x80000000
51 #define SDRAM_CFG2_D_INIT               0x00000010
52 #define DDR_CDR2_VREF_TRAIN_EN  0x00000080
53 #define SDRAM_CFG2_FRC_SR               0x80000000
54 #define SDRAM_CFG_BI                    0x00000001
55
56 #ifdef CONFIG_RAMBOOT_PBL
57 #define CONFIG_SYS_FSL_PBL_PBI  \
58         board/freescale/ls1021aiot/ls102xa_pbi.cfg
59 #endif
60
61 #ifdef CONFIG_SD_BOOT
62 #define CONFIG_SYS_FSL_PBL_RCW  \
63         board/freescale/ls1021aiot/ls102xa_rcw_sd.cfg
64 #define CONFIG_SPL_LIBCOMMON_SUPPORT
65 #define CONFIG_SPL_LIBGENERIC_SUPPORT
66 #define CONFIG_SPL_ENV_SUPPORT
67 #define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
68 #define CONFIG_SPL_I2C_SUPPORT
69 #define CONFIG_SPL_WATCHDOG_SUPPORT
70 #define CONFIG_SPL_MMC_SUPPORT
71 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0xe8
72
73 #define CONFIG_SPL_MAX_SIZE             0x1a000
74 #define CONFIG_SPL_STACK                0x1001d000
75 #define CONFIG_SPL_PAD_TO               0x1c000
76
77 #define CONFIG_SYS_SPL_MALLOC_START     (CONFIG_SYS_TEXT_BASE + \
78                 CONFIG_SYS_MONITOR_LEN)
79 #define CONFIG_SYS_SPL_MALLOC_SIZE      0x100000
80 #define CONFIG_SPL_BSS_START_ADDR       0x80100000
81 #define CONFIG_SPL_BSS_MAX_SIZE         0x80000
82 #define CONFIG_SYS_MONITOR_LEN          0x80000
83 #endif
84
85 #define CONFIG_SYS_DDR_SDRAM_BASE       0x80000000UL
86 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
87
88 #define CONFIG_CHIP_SELECTS_PER_CTRL    4
89
90 /*
91  * Serial Port
92  */
93 #define CONFIG_SYS_NS16550_SERIAL
94 #define CONFIG_SYS_NS16550_REG_SIZE     1
95 #define CONFIG_SYS_NS16550_CLK          get_serial_clock()
96
97 /*
98  * I2C
99  */
100 #define CONFIG_CMD_I2C
101
102 #ifndef CONFIG_DM_I2C
103 #define CONFIG_SYS_I2C
104 #else
105 #define CONFIG_I2C_SET_DEFAULT_BUS_NUM
106 #define CONFIG_I2C_DEFAULT_BUS_NUMBER 0
107 #endif
108 #define CONFIG_SYS_I2C_MXC
109 #define CONFIG_SYS_I2C_MXC_I2C1         /* enable I2C bus 1 */
110 #define CONFIG_SYS_I2C_MXC_I2C2         /* enable I2C bus 2 */
111 #define CONFIG_SYS_I2C_MXC_I2C3         /* enable I2C bus 3 */
112
113 /* EEPROM */
114 #define CONFIG_ID_EEPROM
115 #define CONFIG_SYS_I2C_EEPROM_NXID
116 #define CONFIG_SYS_EEPROM_BUS_NUM               0
117 #define CONFIG_SYS_I2C_EEPROM_ADDR              0x51
118 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN  2
119
120 /*
121  * MMC
122  */
123 #define CONFIG_CMD_MMC
124
125 /* SATA */
126 #define CONFIG_SCSI_AHCI_PLAT
127 #ifndef PCI_DEVICE_ID_FREESCALE_AHCI
128 #define PCI_DEVICE_ID_FREESCALE_AHCI    0x0440
129 #endif
130 #define CONFIG_SCSI_DEV_LIST            {PCI_VENDOR_ID_FREESCALE, \
131         PCI_DEVICE_ID_FREESCALE_AHCI}
132
133 #define CONFIG_SYS_SCSI_MAX_SCSI_ID     1
134 #define CONFIG_SYS_SCSI_MAX_LUN         1
135 #define CONFIG_SYS_SCSI_MAX_DEVICE      (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
136                 CONFIG_SYS_SCSI_MAX_LUN)
137
138 /* SPI */
139 #if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
140 #define CONFIG_SPI_FLASH_SPANSION
141
142 /* QSPI */
143 #define QSPI0_AMBA_BASE                 0x40000000
144 #define FSL_QSPI_FLASH_SIZE             (1 << 24)
145 #define FSL_QSPI_FLASH_NUM              2
146 #define CONFIG_SPI_FLASH_SPANSION
147 #endif
148
149 /* DM SPI */
150 #if defined(CONFIG_FSL_DSPI) || defined(CONFIG_FSL_QSPI)
151 #define CONFIG_CMD_SF
152 #define CONFIG_DM_SPI_FLASH
153 #endif
154
155 /*
156  * eTSEC
157  */
158
159 #ifdef CONFIG_TSEC_ENET
160 #define CONFIG_MII_DEFAULT_TSEC         1
161 #define CONFIG_TSEC1                    1
162 #define CONFIG_TSEC1_NAME               "eTSEC1"
163 #define CONFIG_TSEC2                    1
164 #define CONFIG_TSEC2_NAME               "eTSEC2"
165
166 #define TSEC1_PHY_ADDR                  1
167 #define TSEC2_PHY_ADDR                  3
168
169 #define TSEC1_FLAGS                     (TSEC_GIGABIT | TSEC_REDUCED)
170 #define TSEC2_FLAGS                     (TSEC_GIGABIT | TSEC_REDUCED)
171
172 #define TSEC1_PHYIDX                    0
173 #define TSEC2_PHYIDX                    0
174
175 #define CONFIG_ETHPRIME                 "eTSEC2"
176
177 #define CONFIG_PHY_ATHEROS
178
179 #define CONFIG_HAS_ETH0
180 #define CONFIG_HAS_ETH1
181 #define CONFIG_HAS_ETH2
182 #endif
183
184 /* PCIe */
185 #define CONFIG_PCIE1            /* PCIE controler 1 */
186 #define CONFIG_PCIE2            /* PCIE controler 2 */
187
188 #define FSL_PCIE_COMPAT         "fsl,ls1021a-pcie"
189
190 #ifdef CONFIG_PCI
191 #define CONFIG_PCI_SCAN_SHOW
192 #endif
193
194 #define CONFIG_CMD_MII
195
196 #define CONFIG_CMDLINE_TAG
197
198 #define CONFIG_PEN_ADDR_BIG_ENDIAN
199 #define CONFIG_LAYERSCAPE_NS_ACCESS
200 #define CONFIG_SMP_PEN_ADDR             0x01ee0200
201 #define COUNTER_FREQUENCY               12500000
202
203 #define CONFIG_HWCONFIG
204 #define HWCONFIG_BUFFER_SIZE            256
205
206 #define CONFIG_FSL_DEVICE_DISABLE
207
208 #define CONFIG_EXTRA_ENV_SETTINGS       \
209         "bootargs=root=/dev/ram0 rw console=ttyS0,115200\0" \
210 "initrd_high=0xffffffff\0"      \
211 "fdt_high=0xffffffff\0"
212
213 /*
214  * Miscellaneous configurable options
215  */
216 #define CONFIG_CMD_GREPENV
217 #define CONFIG_CMD_MEMINFO
218
219 #define CONFIG_SYS_LOAD_ADDR            0x82000000
220
221 #define CONFIG_LS102XA_STREAM_ID
222
223 #define CONFIG_SYS_INIT_SP_OFFSET \
224         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
225 #define CONFIG_SYS_INIT_SP_ADDR \
226         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
227
228 #ifdef CONFIG_SPL_BUILD
229 #define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE
230 #else
231 /* start of monitor */
232 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
233 #endif
234
235 #define CONFIG_SYS_QE_FW_ADDR   0x67f40000
236
237 /*
238  * Environment
239  */
240
241 #define CONFIG_ENV_OVERWRITE
242
243 #if defined(CONFIG_SD_BOOT)
244 #define CONFIG_SYS_MMC_ENV_DEV  0
245 #endif
246
247 #define CONFIG_OF_BOARD_SETUP
248 #define CONFIG_OF_STDOUT_VIA_ALIAS
249
250 #include <asm/fsl_secure_boot.h>
251
252 #endif