include/configs/ls1021aiot.h

   1 /*
   2  * Copyright 2016 Freescale Semiconductor, Inc.
   3  *
   4  * SPDX-License-Identifier:     GPL-2.0+
   5  */
   6
   7 #ifndef __CONFIG_H
   8 #define __CONFIG_H
   9
  10 #define CONFIG_LS102XA
  11
  12 #define CONFIG_ARMV7_SECURE_BASE OCRAM_BASE_S_ADDR
  13
  14 #define CONFIG_SYS_FSL_CLK
  15
  16 /*
  17  * Size of malloc() pool
  18  */
  19 #define CONFIG_SYS_MALLOC_LEN   (CONFIG_ENV_SIZE + 16 * 1024 * 1024)
  20
  21 #define CONFIG_SYS_INIT_RAM_ADDR        OCRAM_BASE_ADDR
  22 #define CONFIG_SYS_INIT_RAM_SIZE        OCRAM_SIZE
  23
  24 /* XHCI Support - enabled by default */
  25 #define CONFIG_HAS_FSL_XHCI_USB
  26
  27 #ifdef CONFIG_HAS_FSL_XHCI_USB
  28 #define CONFIG_USB_XHCI_FSL
  29 #define CONFIG_USB_XHCI_DWC3
  30 #define CONFIG_USB_MAX_CONTROLLER_COUNT         1
  31 #define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS      2
  32 #endif
  33
  34 #if defined(CONFIG_HAS_FSL_DR_USB) || defined(CONFIG_HAS_FSL_XHCI_USB)
  35 #define CONFIG_USB_STORAGE
  36 #define CONFIG_CMD_EXT2
  37 #endif
  38
  39 #define CONFIG_SYS_CLK_FREQ             100000000
  40 #define CONFIG_DDR_CLK_FREQ             100000000
  41
  42 /*
  43  * DDR: 800 MHz ( 1600 MT/s data rate )
  44  */
  45
  46 #define DDR_SDRAM_CFG                   0x470c0008
  47 #define DDR_CS0_BNDS                    0x008000bf
  48 #define DDR_CS0_CONFIG                  0x80014302
  49 #define DDR_TIMING_CFG_0                0x50550004
  50 #define DDR_TIMING_CFG_1                0xbcb38c56
  51 #define DDR_TIMING_CFG_2                0x0040d120
  52 #define DDR_TIMING_CFG_3                0x010e1000
  53 #define DDR_TIMING_CFG_4                0x00000001
  54 #define DDR_TIMING_CFG_5                0x03401400
  55 #define DDR_SDRAM_CFG_2                 0x00401010
  56 #define DDR_SDRAM_MODE                  0x00061c60
  57 #define DDR_SDRAM_MODE_2                0x00180000
  58 #define DDR_SDRAM_INTERVAL              0x18600618
  59 #define DDR_DDR_WRLVL_CNTL              0x8655f605
  60 #define DDR_DDR_WRLVL_CNTL_2    0x05060607
  61 #define DDR_DDR_WRLVL_CNTL_3    0x05050505
  62 #define DDR_DDR_CDR1                    0x80040000
  63 #define DDR_DDR_CDR2                    0x00000001
  64 #define DDR_SDRAM_CLK_CNTL              0x02000000
  65 #define DDR_DDR_ZQ_CNTL                 0x89080600
  66 #define DDR_CS0_CONFIG_2                0
  67 #define DDR_SDRAM_CFG_MEM_EN    0x80000000
  68 #define SDRAM_CFG2_D_INIT               0x00000010
  69 #define DDR_CDR2_VREF_TRAIN_EN  0x00000080
  70 #define SDRAM_CFG2_FRC_SR               0x80000000
  71 #define SDRAM_CFG_BI                    0x00000001
  72
  73 #ifdef CONFIG_RAMBOOT_PBL
  74 #define CONFIG_SYS_FSL_PBL_PBI  \
  75         board/freescale/ls1021aiot/ls102xa_pbi.cfg
  76 #endif
  77
  78 #ifdef CONFIG_SD_BOOT
  79 #define CONFIG_SYS_FSL_PBL_RCW  \
  80         board/freescale/ls1021aiot/ls102xa_rcw_sd.cfg
  81 #define CONFIG_SPL_FRAMEWORK
  82 #define CONFIG_SPL_LDSCRIPT     "arch/$(ARCH)/cpu/u-boot-spl.lds"
  83 #define CONFIG_SPL_LIBCOMMON_SUPPORT
  84 #define CONFIG_SPL_LIBGENERIC_SUPPORT
  85 #define CONFIG_SPL_ENV_SUPPORT
  86 #define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
  87 #define CONFIG_SPL_I2C_SUPPORT
  88 #define CONFIG_SPL_WATCHDOG_SUPPORT
  89 #define CONFIG_SPL_SERIAL_SUPPORT
  90 #define CONFIG_SPL_MMC_SUPPORT
  91 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0xe8
  92
  93 #define CONFIG_SPL_TEXT_BASE    0x10000000
  94 #define CONFIG_SPL_MAX_SIZE             0x1a000
  95 #define CONFIG_SPL_STACK                0x1001d000
  96 #define CONFIG_SPL_PAD_TO               0x1c000
  97 #define CONFIG_SYS_TEXT_BASE    0x82000000
  98
  99 #define CONFIG_SYS_SPL_MALLOC_START     (CONFIG_SYS_TEXT_BASE + \
 100                 CONFIG_SYS_MONITOR_LEN)
 101 #define CONFIG_SYS_SPL_MALLOC_SIZE      0x100000
 102 #define CONFIG_SPL_BSS_START_ADDR       0x80100000
 103 #define CONFIG_SPL_BSS_MAX_SIZE         0x80000
 104 #define CONFIG_SYS_MONITOR_LEN          0x80000
 105 #endif
 106
 107 #ifdef CONFIG_QSPI_BOOT
 108 #define CONFIG_SYS_TEXT_BASE            0x40010000
 109 #endif
 110
 111 #define CONFIG_NR_DRAM_BANKS            1
 112
 113 #define CONFIG_SYS_DDR_SDRAM_BASE       0x80000000UL
 114 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
 115
 116 /*
 117  * Serial Port
 118  */
 119 #define CONFIG_CONS_INDEX               1
 120 #define CONFIG_SYS_NS16550_SERIAL
 121 #define CONFIG_SYS_NS16550_REG_SIZE     1
 122 #define CONFIG_SYS_NS16550_CLK          get_serial_clock()
 123
 124 /*
 125  * I2C
 126  */
 127 #define CONFIG_CMD_I2C
 128 #define CONFIG_SYS_I2C
 129 #define CONFIG_SYS_I2C_MXC
 130 #define CONFIG_SYS_I2C_MXC_I2C1         /* enable I2C bus 1 */
 131 #define CONFIG_SYS_I2C_MXC_I2C2         /* enable I2C bus 2 */
 132 #define CONFIG_SYS_I2C_MXC_I2C3         /* enable I2C bus 3 */
 133
 134 /* EEPROM */
 135 #define CONFIG_ID_EEPROM
 136 #define CONFIG_SYS_I2C_EEPROM_NXID
 137 #define CONFIG_SYS_EEPROM_BUS_NUM               0
 138 #define CONFIG_SYS_I2C_EEPROM_ADDR              0x51
 139 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN  2
 140
 141 /*
 142  * MMC
 143  */
 144 #define CONFIG_CMD_MMC
 145 #define CONFIG_FSL_ESDHC
 146
 147 /* SATA */
 148 #define CONFIG_CMD_SCSI
 149 #define CONFIG_LIBATA
 150 #define CONFIG_SCSI_AHCI
 151 #define CONFIG_SCSI_AHCI_PLAT
 152 #ifndef PCI_DEVICE_ID_FREESCALE_AHCI
 153 #define PCI_DEVICE_ID_FREESCALE_AHCI    0x0440
 154 #endif
 155 #define CONFIG_SCSI_DEV_LIST            {PCI_VENDOR_ID_FREESCALE, \
 156         PCI_DEVICE_ID_FREESCALE_AHCI}
 157
 158 #define CONFIG_SYS_SCSI_MAX_SCSI_ID     1
 159 #define CONFIG_SYS_SCSI_MAX_LUN         1
 160 #define CONFIG_SYS_SCSI_MAX_DEVICE      (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
 161                 CONFIG_SYS_SCSI_MAX_LUN)
 162
 163 #define CONFIG_CMD_FAT
 164
 165 /* SPI */
 166 #if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
 167 #define CONFIG_SPI_FLASH_SPANSION
 168
 169 /* QSPI */
 170 #define QSPI0_AMBA_BASE                 0x40000000
 171 #define FSL_QSPI_FLASH_SIZE             (1 << 24)
 172 #define FSL_QSPI_FLASH_NUM              2
 173 #define CONFIG_SPI_FLASH_BAR
 174 #define CONFIG_SPI_FLASH_SPANSION
 175 #endif
 176
 177 /* DM SPI */
 178 #if defined(CONFIG_FSL_DSPI) || defined(CONFIG_FSL_QSPI)
 179 #define CONFIG_CMD_SF
 180 #define CONFIG_DM_SPI_FLASH
 181 #endif
 182
 183 /*
 184  * eTSEC
 185  */
 186 #define CONFIG_TSEC_ENET
 187
 188 #ifdef CONFIG_TSEC_ENET
 189 #define CONFIG_MII
 190 #define CONFIG_MII_DEFAULT_TSEC         1
 191 #define CONFIG_TSEC1                    1
 192 #define CONFIG_TSEC1_NAME               "eTSEC1"
 193 #define CONFIG_TSEC2                    1
 194 #define CONFIG_TSEC2_NAME               "eTSEC2"
 195
 196 #define TSEC1_PHY_ADDR                  1
 197 #define TSEC2_PHY_ADDR                  3
 198
 199 #define TSEC1_FLAGS                     (TSEC_GIGABIT | TSEC_REDUCED)
 200 #define TSEC2_FLAGS                     (TSEC_GIGABIT | TSEC_REDUCED)
 201
 202 #define TSEC1_PHYIDX                    0
 203 #define TSEC2_PHYIDX                    0
 204
 205 #define CONFIG_ETHPRIME                 "eTSEC2"
 206
 207 #define CONFIG_PHY_GIGE
 208 #define CONFIG_PHYLIB
 209 #define CONFIG_PHY_ATHEROS
 210
 211 #define CONFIG_HAS_ETH0
 212 #define CONFIG_HAS_ETH1
 213 #define CONFIG_HAS_ETH2
 214 #endif
 215
 216 /* PCIe */
 217 #define CONFIG_PCIE1            /* PCIE controler 1 */
 218 #define CONFIG_PCIE2            /* PCIE controler 2 */
 219
 220 #define FSL_PCIE_COMPAT         "fsl,ls1021a-pcie"
 221
 222 #ifdef CONFIG_PCI
 223 #define CONFIG_PCI_SCAN_SHOW
 224 #define CONFIG_CMD_PCI
 225 #endif
 226
 227 #define CONFIG_CMD_PING
 228 #define CONFIG_CMD_DHCP
 229 #define CONFIG_CMD_MII
 230
 231 #define CONFIG_CMDLINE_TAG
 232 #define CONFIG_CMDLINE_EDITING
 233
 234 #if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT)
 235 #undef  CONFIG_CMD_IMLS
 236 #endif
 237
 238 #define CONFIG_PEN_ADDR_BIG_ENDIAN
 239 #define CONFIG_LAYERSCAPE_NS_ACCESS
 240 #define CONFIG_SMP_PEN_ADDR             0x01ee0200
 241 #define COUNTER_FREQUENCY               12500000
 242
 243 #define CONFIG_HWCONFIG
 244 #define HWCONFIG_BUFFER_SIZE            256
 245
 246 #define CONFIG_FSL_DEVICE_DISABLE
 247
 248 #define CONFIG_EXTRA_ENV_SETTINGS       \
 249         "bootargs=root=/dev/ram0 rw console=ttyS0,115200\0" \
 250 "initrd_high=0xffffffff\0"      \
 251 "fdt_high=0xffffffff\0"
 252
 253 /*
 254  * Miscellaneous configurable options
 255  */
 256 #define CONFIG_SYS_LONGHELP             /* undef to save memory */
 257 #define CONFIG_SYS_PROMPT_HUSH_PS2      "> "
 258 #define CONFIG_AUTO_COMPLETE
 259 #define CONFIG_SYS_CBSIZE       256     /* Console I/O Buffer Size */
 260 #define CONFIG_SYS_PBSIZE               \
 261         (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
 262 #define CONFIG_SYS_MAXARGS      16      /* max number of command args */
 263 #define CONFIG_SYS_BARGSIZE             CONFIG_SYS_CBSIZE
 264
 265 #define CONFIG_CMD_GREPENV
 266 #define CONFIG_CMD_MEMINFO
 267
 268 #define CONFIG_SYS_LOAD_ADDR            0x82000000
 269
 270 #define CONFIG_LS102XA_STREAM_ID
 271
 272 #define CONFIG_SYS_INIT_SP_OFFSET \
 273         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 274 #define CONFIG_SYS_INIT_SP_ADDR \
 275         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 276
 277 #ifdef CONFIG_SPL_BUILD
 278 #define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE
 279 #else
 280 /* start of monitor */
 281 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
 282 #endif
 283
 284 #define CONFIG_SYS_QE_FW_ADDR   0x67f40000
 285
 286 /*
 287  * Environment
 288  */
 289
 290 #define CONFIG_ENV_OVERWRITE
 291
 292 #if defined(CONFIG_SD_BOOT)
 293 #define CONFIG_ENV_OFFSET               0x100000
 294 #define CONFIG_ENV_IS_IN_MMC
 295 #define CONFIG_SYS_MMC_ENV_DEV  0
 296 #define CONFIG_ENV_SIZE                 0x2000
 297 #elif defined(CONFIG_QSPI_BOOT)
 298 #define CONFIG_ENV_IS_IN_SPI_FLASH
 299 #define CONFIG_ENV_SIZE                 0x2000
 300 #define CONFIG_ENV_OFFSET               0x100000
 301 #define CONFIG_ENV_SECT_SIZE    0x10000
 302 #endif
 303
 304 #define CONFIG_OF_BOARD_SETUP
 305 #define CONFIG_OF_STDOUT_VIA_ALIAS
 306 #define CONFIG_CMD_BOOTZ
 307
 308 #define CONFIG_MISC_INIT_R
 309
 310 /* Hash command with SHA acceleration supported in hardware */
 311
 312 #ifdef CONFIG_FSL_CAAM
 313
 314 #define CONFIG_CMD_HASH
 315
 316 #define CONFIG_SHA_HW_ACCEL
 317
 318 #endif
 319
 320 #include <asm/fsl_secure_boot.h>
 321
 322 #endif