include/configs/ls1021aiot.h

   1 /*
   2  * Copyright 2016 Freescale Semiconductor, Inc.
   3  *
   4  * SPDX-License-Identifier:     GPL-2.0+
   5  */
   6
   7 #ifndef __CONFIG_H
   8 #define __CONFIG_H
   9
  10 #define CONFIG_LS102XA
  11
  12 #define CONFIG_ARMV7_SECURE_BASE OCRAM_BASE_S_ADDR
  13
  14 #define CONFIG_SYS_FSL_CLK
  15
  16 #define CONFIG_BOARD_EARLY_INIT_F
  17
  18 /*
  19  * Size of malloc() pool
  20  */
  21 #define CONFIG_SYS_MALLOC_LEN   (CONFIG_ENV_SIZE + 16 * 1024 * 1024)
  22
  23 #define CONFIG_SYS_INIT_RAM_ADDR        OCRAM_BASE_ADDR
  24 #define CONFIG_SYS_INIT_RAM_SIZE        OCRAM_SIZE
  25
  26 /* XHCI Support - enabled by default */
  27 #define CONFIG_HAS_FSL_XHCI_USB
  28
  29 #ifdef CONFIG_HAS_FSL_XHCI_USB
  30 #define CONFIG_USB_XHCI_FSL
  31 #define CONFIG_USB_XHCI_DWC3
  32 #define CONFIG_USB_MAX_CONTROLLER_COUNT         1
  33 #define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS      2
  34 #endif
  35
  36 #if defined(CONFIG_HAS_FSL_DR_USB) || defined(CONFIG_HAS_FSL_XHCI_USB)
  37 #define CONFIG_USB_STORAGE
  38 #define CONFIG_CMD_EXT2
  39 #endif
  40
  41 /*
  42  * Generic Timer Definitions
  43  */
  44 #define GENERIC_TIMER_CLK               12500000
  45
  46 #define CONFIG_SYS_CLK_FREQ             100000000
  47 #define CONFIG_DDR_CLK_FREQ             100000000
  48
  49 /*
  50  * DDR: 800 MHz ( 1600 MT/s data rate )
  51  */
  52
  53 #define DDR_SDRAM_CFG                   0x470c0008
  54 #define DDR_CS0_BNDS                    0x008000bf
  55 #define DDR_CS0_CONFIG                  0x80014302
  56 #define DDR_TIMING_CFG_0                0x50550004
  57 #define DDR_TIMING_CFG_1                0xbcb38c56
  58 #define DDR_TIMING_CFG_2                0x0040d120
  59 #define DDR_TIMING_CFG_3                0x010e1000
  60 #define DDR_TIMING_CFG_4                0x00000001
  61 #define DDR_TIMING_CFG_5                0x03401400
  62 #define DDR_SDRAM_CFG_2                 0x00401010
  63 #define DDR_SDRAM_MODE                  0x00061c60
  64 #define DDR_SDRAM_MODE_2                0x00180000
  65 #define DDR_SDRAM_INTERVAL              0x18600618
  66 #define DDR_DDR_WRLVL_CNTL              0x8655f605
  67 #define DDR_DDR_WRLVL_CNTL_2    0x05060607
  68 #define DDR_DDR_WRLVL_CNTL_3    0x05050505
  69 #define DDR_DDR_CDR1                    0x80040000
  70 #define DDR_DDR_CDR2                    0x00000001
  71 #define DDR_SDRAM_CLK_CNTL              0x02000000
  72 #define DDR_DDR_ZQ_CNTL                 0x89080600
  73 #define DDR_CS0_CONFIG_2                0
  74 #define DDR_SDRAM_CFG_MEM_EN    0x80000000
  75 #define SDRAM_CFG2_D_INIT               0x00000010
  76 #define DDR_CDR2_VREF_TRAIN_EN  0x00000080
  77 #define SDRAM_CFG2_FRC_SR               0x80000000
  78 #define SDRAM_CFG_BI                    0x00000001
  79
  80 #ifdef CONFIG_RAMBOOT_PBL
  81 #define CONFIG_SYS_FSL_PBL_PBI  \
  82         board/freescale/ls1021aiot/ls102xa_pbi.cfg
  83 #endif
  84
  85 #ifdef CONFIG_SD_BOOT
  86 #define CONFIG_SYS_FSL_PBL_RCW  \
  87         board/freescale/ls1021aiot/ls102xa_rcw_sd.cfg
  88 #define CONFIG_SPL_FRAMEWORK
  89 #define CONFIG_SPL_LDSCRIPT     "arch/$(ARCH)/cpu/u-boot-spl.lds"
  90 #define CONFIG_SPL_LIBCOMMON_SUPPORT
  91 #define CONFIG_SPL_LIBGENERIC_SUPPORT
  92 #define CONFIG_SPL_ENV_SUPPORT
  93 #define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
  94 #define CONFIG_SPL_I2C_SUPPORT
  95 #define CONFIG_SPL_WATCHDOG_SUPPORT
  96 #define CONFIG_SPL_SERIAL_SUPPORT
  97 #define CONFIG_SPL_MMC_SUPPORT
  98 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0xe8
  99
 100 #define CONFIG_SPL_TEXT_BASE    0x10000000
 101 #define CONFIG_SPL_MAX_SIZE             0x1a000
 102 #define CONFIG_SPL_STACK                0x1001d000
 103 #define CONFIG_SPL_PAD_TO               0x1c000
 104 #define CONFIG_SYS_TEXT_BASE    0x82000000
 105
 106 #define CONFIG_SYS_SPL_MALLOC_START     (CONFIG_SYS_TEXT_BASE + \
 107                 CONFIG_SYS_MONITOR_LEN)
 108 #define CONFIG_SYS_SPL_MALLOC_SIZE      0x100000
 109 #define CONFIG_SPL_BSS_START_ADDR       0x80100000
 110 #define CONFIG_SPL_BSS_MAX_SIZE         0x80000
 111 #define CONFIG_SYS_MONITOR_LEN          0x80000
 112 #define CONFIG_SYS_NO_FLASH
 113 #endif
 114
 115 #ifdef CONFIG_QSPI_BOOT
 116 #define CONFIG_SYS_TEXT_BASE            0x40010000
 117 #endif
 118
 119 #if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
 120 #define CONFIG_SYS_NO_FLASH
 121 #endif
 122
 123 #define CONFIG_NR_DRAM_BANKS            1
 124
 125 #define CONFIG_SYS_DDR_SDRAM_BASE       0x80000000UL
 126 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
 127
 128 #define CONFIG_FSL_CAAM                 /* Enable CAAM */
 129
 130 /*
 131  * Serial Port
 132  */
 133 #define CONFIG_CONS_INDEX               1
 134 #define CONFIG_SYS_NS16550_SERIAL
 135 #define CONFIG_SYS_NS16550_REG_SIZE     1
 136 #define CONFIG_SYS_NS16550_CLK          get_serial_clock()
 137 #define CONFIG_BAUDRATE                 115200
 138
 139 /*
 140  * I2C
 141  */
 142 #define CONFIG_CMD_I2C
 143 #define CONFIG_SYS_I2C
 144 #define CONFIG_SYS_I2C_MXC
 145 #define CONFIG_SYS_I2C_MXC_I2C1         /* enable I2C bus 1 */
 146 #define CONFIG_SYS_I2C_MXC_I2C2         /* enable I2C bus 2 */
 147 #define CONFIG_SYS_I2C_MXC_I2C3         /* enable I2C bus 3 */
 148
 149 /* EEPROM */
 150 #define CONFIG_ID_EEPROM
 151 #define CONFIG_SYS_I2C_EEPROM_NXID
 152 #define CONFIG_SYS_EEPROM_BUS_NUM               0
 153 #define CONFIG_SYS_I2C_EEPROM_ADDR              0x51
 154 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN  2
 155
 156 /*
 157  * MMC
 158  */
 159 #define CONFIG_MMC
 160 #define CONFIG_CMD_MMC
 161 #define CONFIG_FSL_ESDHC
 162 #define CONFIG_GENERIC_MMC
 163
 164 /* SATA */
 165 #define CONFIG_BOARD_LATE_INIT
 166 #define CONFIG_CMD_SCSI
 167 #define CONFIG_LIBATA
 168 #define CONFIG_SCSI_AHCI
 169 #define CONFIG_SCSI_AHCI_PLAT
 170 #ifndef PCI_DEVICE_ID_FREESCALE_AHCI
 171 #define PCI_DEVICE_ID_FREESCALE_AHCI    0x0440
 172 #endif
 173 #define CONFIG_SCSI_DEV_LIST            {PCI_VENDOR_ID_FREESCALE, \
 174         PCI_DEVICE_ID_FREESCALE_AHCI}
 175
 176 #define CONFIG_SYS_SCSI_MAX_SCSI_ID     1
 177 #define CONFIG_SYS_SCSI_MAX_LUN         1
 178 #define CONFIG_SYS_SCSI_MAX_DEVICE      (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
 179                 CONFIG_SYS_SCSI_MAX_LUN)
 180
 181 #define CONFIG_CMD_FAT
 182 #define CONFIG_DOS_PARTITION
 183
 184 /* SPI */
 185 #if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
 186 #define CONFIG_SPI_FLASH_SPANSION
 187
 188 /* QSPI */
 189 #define QSPI0_AMBA_BASE                 0x40000000
 190 #define FSL_QSPI_FLASH_SIZE             (1 << 24)
 191 #define FSL_QSPI_FLASH_NUM              2
 192 #define CONFIG_SPI_FLASH_BAR
 193 #define CONFIG_SPI_FLASH_SPANSION
 194 #endif
 195
 196 /* DM SPI */
 197 #if defined(CONFIG_FSL_DSPI) || defined(CONFIG_FSL_QSPI)
 198 #define CONFIG_CMD_SF
 199 #define CONFIG_DM_SPI_FLASH
 200 #endif
 201
 202 /*
 203  * eTSEC
 204  */
 205 #define CONFIG_TSEC_ENET
 206
 207 #ifdef CONFIG_TSEC_ENET
 208 #define CONFIG_MII
 209 #define CONFIG_MII_DEFAULT_TSEC         1
 210 #define CONFIG_TSEC1                    1
 211 #define CONFIG_TSEC1_NAME               "eTSEC1"
 212 #define CONFIG_TSEC2                    1
 213 #define CONFIG_TSEC2_NAME               "eTSEC2"
 214
 215 #define TSEC1_PHY_ADDR                  1
 216 #define TSEC2_PHY_ADDR                  3
 217
 218 #define TSEC1_FLAGS                     (TSEC_GIGABIT | TSEC_REDUCED)
 219 #define TSEC2_FLAGS                     (TSEC_GIGABIT | TSEC_REDUCED)
 220
 221 #define TSEC1_PHYIDX                    0
 222 #define TSEC2_PHYIDX                    0
 223
 224 #define CONFIG_ETHPRIME                 "eTSEC2"
 225
 226 #define CONFIG_PHY_GIGE
 227 #define CONFIG_PHYLIB
 228 #define CONFIG_PHY_ATHEROS
 229
 230 #define CONFIG_HAS_ETH0
 231 #define CONFIG_HAS_ETH1
 232 #define CONFIG_HAS_ETH2
 233 #endif
 234
 235 /* PCIe */
 236 #define CONFIG_PCI              /* Enable PCI/PCIE */
 237 #define CONFIG_PCIE1            /* PCIE controler 1 */
 238 #define CONFIG_PCIE2            /* PCIE controler 2 */
 239
 240 /* Use common FSL Layerscape PCIe code */
 241 #define CONFIG_PCIE_LAYERSCAPE
 242 #define FSL_PCIE_COMPAT         "fsl,ls1021a-pcie"
 243
 244 #define CONFIG_SYS_PCI_64BIT
 245
 246 #define CONFIG_SYS_PCIE_CFG0_PHYS_OFF   0x00000000
 247 #define CONFIG_SYS_PCIE_CFG0_SIZE       0x00001000      /* 4k */
 248 #define CONFIG_SYS_PCIE_CFG1_PHYS_OFF   0x00001000
 249 #define CONFIG_SYS_PCIE_CFG1_SIZE       0x00001000      /* 4k */
 250
 251 #define CONFIG_SYS_PCIE_IO_BUS          0x00000000
 252 #define CONFIG_SYS_PCIE_IO_PHYS_OFF     0x00010000
 253 #define CONFIG_SYS_PCIE_IO_SIZE         0x00010000      /* 64k */
 254
 255 #define CONFIG_SYS_PCIE_MEM_BUS         0x08000000
 256 #define CONFIG_SYS_PCIE_MEM_PHYS_OFF    0x04000000
 257 #define CONFIG_SYS_PCIE_MEM_SIZE        0x08000000      /* 128M */
 258
 259 #ifdef CONFIG_PCI
 260 #define CONFIG_PCI_PNP
 261 #define CONFIG_PCI_SCAN_SHOW
 262 #define CONFIG_CMD_PCI
 263 #endif
 264
 265 #define CONFIG_CMD_PING
 266 #define CONFIG_CMD_DHCP
 267 #define CONFIG_CMD_MII
 268
 269 #define CONFIG_CMDLINE_TAG
 270 #define CONFIG_CMDLINE_EDITING
 271
 272 #if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT)
 273 #undef  CONFIG_CMD_IMLS
 274 #endif
 275
 276 #define CONFIG_PEN_ADDR_BIG_ENDIAN
 277 #define CONFIG_LAYERSCAPE_NS_ACCESS
 278 #define CONFIG_SMP_PEN_ADDR             0x01ee0200
 279 #define CONFIG_TIMER_CLK_FREQ           12500000
 280
 281 #define CONFIG_HWCONFIG
 282 #define HWCONFIG_BUFFER_SIZE            256
 283
 284 #define CONFIG_FSL_DEVICE_DISABLE
 285
 286 #define CONFIG_EXTRA_ENV_SETTINGS       \
 287         "bootargs=root=/dev/ram0 rw console=ttyS0,115200\0" \
 288 "initrd_high=0xffffffff\0"      \
 289 "fdt_high=0xffffffff\0"
 290
 291 /*
 292  * Miscellaneous configurable options
 293  */
 294 #define CONFIG_SYS_LONGHELP             /* undef to save memory */
 295 #define CONFIG_SYS_PROMPT_HUSH_PS2      "> "
 296 #define CONFIG_AUTO_COMPLETE
 297 #define CONFIG_SYS_CBSIZE       256     /* Console I/O Buffer Size */
 298 #define CONFIG_SYS_PBSIZE               \
 299         (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
 300 #define CONFIG_SYS_MAXARGS      16      /* max number of command args */
 301 #define CONFIG_SYS_BARGSIZE             CONFIG_SYS_CBSIZE
 302
 303 #define CONFIG_CMD_GREPENV
 304 #define CONFIG_CMD_MEMINFO
 305
 306 #define CONFIG_SYS_LOAD_ADDR            0x82000000
 307
 308 #define CONFIG_LS102XA_STREAM_ID
 309
 310 /*
 311  * Stack sizes
 312  * The stack sizes are set up in start.S using the settings below
 313  */
 314 #define CONFIG_STACKSIZE                (30 * 1024)
 315
 316 #define CONFIG_SYS_INIT_SP_OFFSET \
 317         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 318 #define CONFIG_SYS_INIT_SP_ADDR \
 319         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 320
 321 #ifdef CONFIG_SPL_BUILD
 322 #define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE
 323 #else
 324 /* start of monitor */
 325 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
 326 #endif
 327
 328 #define CONFIG_SYS_QE_FW_ADDR   0x67f40000
 329
 330 /*
 331  * Environment
 332  */
 333
 334 #define CONFIG_ENV_OVERWRITE
 335
 336 #if defined(CONFIG_SD_BOOT)
 337 #define CONFIG_ENV_OFFSET               0x100000
 338 #define CONFIG_ENV_IS_IN_MMC
 339 #define CONFIG_SYS_MMC_ENV_DEV  0
 340 #define CONFIG_ENV_SIZE                 0x2000
 341 #elif defined(CONFIG_QSPI_BOOT)
 342 #define CONFIG_ENV_IS_IN_SPI_FLASH
 343 #define CONFIG_ENV_SIZE                 0x2000
 344 #define CONFIG_ENV_OFFSET               0x100000
 345 #define CONFIG_ENV_SECT_SIZE    0x10000
 346 #endif
 347
 348 #define CONFIG_OF_BOARD_SETUP
 349 #define CONFIG_OF_STDOUT_VIA_ALIAS
 350 #define CONFIG_CMD_BOOTZ
 351
 352 #define CONFIG_MISC_INIT_R
 353
 354 /* Hash command with SHA acceleration supported in hardware */
 355
 356 #ifdef CONFIG_FSL_CAAM
 357
 358 #define CONFIG_CMD_HASH
 359
 360 #define CONFIG_SHA_HW_ACCEL
 361
 362 #endif
 363
 364 #include <asm/fsl_secure_boot.h>
 365
 366 #endif