include/configs/ls1012afrwy.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright 2018, 2021 NXP
   4  */
   5
   6 #ifndef __LS1012AFRWY_H__
   7 #define __LS1012AFRWY_H__
   8
   9 #include "ls1012a_common.h"
  10
  11 /* Board Rev*/
  12 #define BOARD_REV_A_B                   0x0
  13 #define BOARD_REV_C                     0x00080000
  14 #define BOARD_REV_MASK                  0x001A0000
  15 /* DDR */
  16 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
  17 #define SYS_SDRAM_SIZE_512              0x20000000
  18 #define SYS_SDRAM_SIZE_1024             0x40000000
  19
  20 /* ENV */
  21 #define CONFIG_SYS_FSL_QSPI_BASE        0x40000000
  22
  23 #ifndef CONFIG_SPL_BUILD
  24 #undef BOOT_TARGET_DEVICES
  25 #define BOOT_TARGET_DEVICES(func) \
  26         func(MMC, mmc, 0) \
  27         func(USB, usb, 0) \
  28         func(DHCP, dhcp, na)
  29 #endif
  30
  31 #define CONFIG_PCIE1            /* PCIE controller 1 */
  32
  33 #define CONFIG_PCI_SCAN_SHOW
  34
  35 #undef CONFIG_EXTRA_ENV_SETTINGS
  36 #define CONFIG_EXTRA_ENV_SETTINGS               \
  37         "verify=no\0"                           \
  38         "initrd_high=0xffffffffffffffff\0"      \
  39         "fdt_addr=0x00f00000\0"                 \
  40         "kernel_addr=0x01000000\0"              \
  41         "kernel_size_sd=0x16000\0"              \
  42         "kernelhdr_size_sd=0x10\0"              \
  43         "kernel_addr_sd=0x8000\0"               \
  44         "kernelhdr_addr_sd=0x4000\0"            \
  45         "kernelheader_addr=0x1fc000\0"          \
  46         "kernelheader_addr=0x1fc000\0"          \
  47         "scriptaddr=0x80000000\0"               \
  48         "scripthdraddr=0x80080000\0"            \
  49         "fdtheader_addr_r=0x80100000\0"         \
  50         "kernelheader_addr_r=0x80200000\0"      \
  51         "kernelheader_size=0x40000\0"           \
  52         "kernel_addr_r=0x92000000\0"            \
  53         "fdt_addr_r=0x90000000\0"               \
  54         "load_addr=0x92000000\0"                \
  55         "kernel_size=0x2800000\0"               \
  56         "kernelheader_size=0x40000\0"           \
  57         "bootm_size=0x10000000\0"               \
  58         "console=ttyS0,115200\0"                \
  59         "BOARD=ls1012afrwy\0"                   \
  60         BOOTENV                                 \
  61         "boot_scripts=ls1012afrwy_boot.scr\0"   \
  62         "boot_script_hdr=hdr_ls1012afrwy_bs.out\0"      \
  63         "scan_dev_for_boot_part="               \
  64              "part list ${devtype} ${devnum} devplist; "        \
  65              "env exists devplist || setenv devplist 1; "       \
  66              "for distro_bootpart in ${devplist}; do "          \
  67                   "if fstype ${devtype} "                       \
  68                       "${devnum}:${distro_bootpart} "           \
  69                       "bootfstype; then "                       \
  70                       "run scan_dev_for_boot; " \
  71                   "fi; "                        \
  72               "done\0"                          \
  73         "boot_a_script="                                  \
  74                 "load ${devtype} ${devnum}:${distro_bootpart} "  \
  75                         "${scriptaddr} ${prefix}${script}; "    \
  76                 "env exists secureboot && load ${devtype} "     \
  77                         "${devnum}:${distro_bootpart} "         \
  78                         "${scripthdraddr} ${prefix}${boot_script_hdr}; " \
  79                         "env exists secureboot "        \
  80                         "&& esbc_validate ${scripthdraddr};"    \
  81                 "source ${scriptaddr}\0"          \
  82         "sd_bootcmd=echo Trying load from sd card..;"           \
  83                 "mmcinfo; mmc read $load_addr "                 \
  84                 "$kernel_addr_sd $kernel_size_sd ;"             \
  85                 "env exists secureboot && mmc read $kernelheader_addr_r "\
  86                 "$kernelhdr_addr_sd $kernelhdr_size_sd "                \
  87                 " && esbc_validate ${kernelheader_addr_r};"     \
  88                 "bootm $load_addr#$BOARD\0"
  89
  90 #ifdef CONFIG_TFABOOT
  91 #undef QSPI_NOR_BOOTCOMMAND
  92 #define QSPI_NOR_BOOTCOMMAND "run distro_bootcmd; run sd_bootcmd; "\
  93                              "env exists secureboot && esbc_halt;"
  94 #endif
  95
  96 #include <asm/fsl_secure_boot.h>
  97
  98 #include <asm/fsl_secure_boot.h>
  99 #endif /* __LS1012AFRWY_H__ */