include/configs/ls1012afrwy.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright 2018 NXP
   4  */
   5
   6 #ifndef __LS1012AFRWY_H__
   7 #define __LS1012AFRWY_H__
   8
   9 #include "ls1012a_common.h"
  10
  11 /* Board Rev*/
  12 #define BOARD_REV_A                     0x0
  13 #define BOARD_REV_B                     0x200
  14
  15 /* DDR */
  16 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
  17 #define CONFIG_CHIP_SELECTS_PER_CTRL    1
  18 #define SYS_SDRAM_SIZE_512              0x20000000
  19 #define SYS_SDRAM_SIZE_1024             0x40000000
  20 #define CONFIG_CHIP_SELECTS_PER_CTRL    1
  21 #define CONFIG_CMD_MEMINFO
  22 #define CONFIG_CMD_MEMTEST
  23 #define CONFIG_SYS_MEMTEST_START        0x80000000
  24 #define CONFIG_SYS_MEMTEST_END          0x9fffffff
  25
  26 #ifndef CONFIG_SPL_BUILD
  27 #undef BOOT_TARGET_DEVICES
  28 #define BOOT_TARGET_DEVICES(func) \
  29         func(MMC, mmc, 0) \
  30         func(USB, usb, 0)
  31 #endif
  32
  33 #undef CONFIG_ENV_OFFSET
  34 #define CONFIG_ENV_OFFSET              0x1D0000
  35 #undef FSL_QSPI_FLASH_SIZE
  36 #define FSL_QSPI_FLASH_SIZE            SZ_16M
  37 #undef CONFIG_ENV_SECT_SIZE
  38 #define CONFIG_ENV_SECT_SIZE            0x10000 /*64 KB*/
  39 #undef CONFIG_ENV_SIZE
  40 #define CONFIG_ENV_SIZE                 0x10000 /*64 KB*/
  41
  42 /*  MMC  */
  43 #ifdef CONFIG_MMC
  44 #define CONFIG_FSL_ESDHC
  45 #define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
  46 #endif
  47
  48 #define CONFIG_PCIE1            /* PCIE controller 1 */
  49
  50 #define CONFIG_PCI_SCAN_SHOW
  51
  52 #undef CONFIG_EXTRA_ENV_SETTINGS
  53 #define CONFIG_EXTRA_ENV_SETTINGS               \
  54         "verify=no\0"                           \
  55         "fdt_high=0xffffffffffffffff\0"         \
  56         "initrd_high=0xffffffffffffffff\0"      \
  57         "fdt_addr=0x00f00000\0"                 \
  58         "kernel_addr=0x01000000\0"              \
  59         "kernel_size_sd=0x16000\0"              \
  60         "kernelhdr_size_sd=0x10\0"              \
  61         "kernel_addr_sd=0x8000\0"               \
  62         "kernelhdr_addr_sd=0x4000\0"            \
  63         "kernelheader_addr=0x1fc000\0"          \
  64         "kernelheader_addr=0x1fc000\0"          \
  65         "scriptaddr=0x80000000\0"               \
  66         "scripthdraddr=0x80080000\0"            \
  67         "fdtheader_addr_r=0x80100000\0"         \
  68         "kernelheader_addr_r=0x80200000\0"      \
  69         "kernelheader_size=0x40000\0"           \
  70         "kernel_addr_r=0x81000000\0"            \
  71         "fdt_addr_r=0x90000000\0"               \
  72         "load_addr=0x96000000\0"                \
  73         "kernel_size=0x2800000\0"               \
  74         "kernelheader_size=0x40000\0"           \
  75         "console=ttyS0,115200\0"                \
  76         BOOTENV                                 \
  77         "boot_scripts=ls1012afrwy_boot.scr\0"   \
  78         "boot_script_hdr=hdr_ls1012afrwy_bs.out\0"      \
  79         "scan_dev_for_boot_part="               \
  80              "part list ${devtype} ${devnum} devplist; "        \
  81              "env exists devplist || setenv devplist 1; "       \
  82              "for distro_bootpart in ${devplist}; do "          \
  83                   "if fstype ${devtype} "                       \
  84                       "${devnum}:${distro_bootpart} "           \
  85                       "bootfstype; then "                       \
  86                       "run scan_dev_for_boot; " \
  87                   "fi; "                        \
  88               "done\0"                          \
  89         "scan_dev_for_boot="                              \
  90                 "echo Scanning ${devtype} "               \
  91                                 "${devnum}:${distro_bootpart}...; "  \
  92                 "for prefix in ${boot_prefixes}; do "     \
  93                         "run scan_dev_for_scripts; "      \
  94                 "done;"                                   \
  95                 "\0"                                      \
  96         "boot_a_script="                                  \
  97                 "load ${devtype} ${devnum}:${distro_bootpart} "  \
  98                         "${scriptaddr} ${prefix}${script}; "    \
  99                 "env exists secureboot && load ${devtype} "     \
 100                         "${devnum}:${distro_bootpart} "         \
 101                         "${scripthdraddr} ${prefix}${boot_script_hdr} " \
 102                         "&& esbc_validate ${scripthdraddr};"    \
 103                 "source ${scriptaddr}\0"          \
 104         "installer=load mmc 0:2 $load_addr "    \
 105                    "/flex_installer_arm64.itb; "        \
 106                    "bootm $load_addr#$board\0"  \
 107         "qspi_bootcmd=echo Trying load from qspi..;"    \
 108                 "sf probe && sf read $load_addr "       \
 109                 "$kernel_addr $kernel_size; env exists secureboot "     \
 110                 "&& sf read $kernelheader_addr_r $kernelheader_addr "   \
 111                 "$kernelheader_size && esbc_validate ${kernelheader_addr_r}; " \
 112                 "bootm $load_addr#$board\0"     \
 113         "sd_bootcmd=echo Trying load from sd card..;"           \
 114                 "mmcinfo; mmc read $load_addr "                 \
 115                 "$kernel_addr_sd $kernel_size_sd ;"             \
 116                 "env exists secureboot && mmc read $kernelheader_addr_r "\
 117                 "$kernelhdr_addr_sd $kernelhdr_size_sd "                \
 118                 " && esbc_validate ${kernelheader_addr_r};"     \
 119                 "bootm $load_addr#$board\0"
 120
 121 #undef CONFIG_BOOTCOMMAND
 122 #define CONFIG_BOOTCOMMAND "pfe stop; run distro_bootcmd; run sd_bootcmd; "\
 123                            "env exists secureboot && esbc_halt;"
 124 #define CONFIG_CMD_MEMINFO
 125 #define CONFIG_CMD_MEMTEST
 126 #define CONFIG_SYS_MEMTEST_START        0x80000000
 127 #define CONFIG_SYS_MEMTEST_END          0x9fffffff
 128
 129 #include <asm/fsl_secure_boot.h>
 130
 131 #include <asm/fsl_secure_boot.h>
 132 #endif /* __LS1012AFRWY_H__ */