include/configs/ls1012a_common.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright 2016 Freescale Semiconductor
   4  */
   5
   6 #ifndef __LS1012A_COMMON_H
   7 #define __LS1012A_COMMON_H
   8
   9 #include <asm/arch/config.h>
  10 #include <asm/arch/stream_id_lsch2.h>
  11 #include <linux/sizes.h>
  12
  13 #define CONFIG_SYS_CLK_FREQ             125000000
  14
  15 #ifdef CONFIG_TFABOOT
  16 #define CONFIG_SYS_INIT_SP_ADDR                CONFIG_SYS_TEXT_BASE
  17 #else
  18 #define CONFIG_SYS_INIT_SP_ADDR         (CONFIG_SYS_FSL_OCRAM_BASE + 0xfff0)
  19 #endif
  20
  21 #define CONFIG_SYS_DDR_SDRAM_BASE       0x80000000
  22 #define CONFIG_SYS_FSL_DDR_SDRAM_BASE_PHY       0
  23 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
  24 #define CONFIG_SYS_DDR_BLOCK2_BASE     0x880000000ULL
  25
  26 /* Generic Timer Definitions */
  27 #define COUNTER_FREQUENCY               25000000        /* 25MHz */
  28
  29 /* CSU */
  30 #define CONFIG_LAYERSCAPE_NS_ACCESS
  31
  32 /* Size of malloc() pool */
  33 #define CONFIG_SYS_MALLOC_LEN           (5 * SZ_1M)
  34
  35 /* PFE */
  36 #define CONFIG_SYS_FMAN_FW_ADDR         0x400d0000
  37 #define CONFIG_SYS_QE_FMAN_FW_LENGTH    0x300000
  38
  39 /*SPI device */
  40 #define CONFIG_SYS_FSL_QSPI_BASE        0x40000000
  41
  42 /* SATA */
  43 #define CONFIG_SCSI_AHCI_PLAT
  44
  45 #define CONFIG_SYS_SATA                         AHCI_BASE_ADDR
  46
  47 #define CONFIG_SYS_SCSI_MAX_SCSI_ID             1
  48 #define CONFIG_SYS_SCSI_MAX_LUN                 1
  49 #define CONFIG_SYS_SCSI_MAX_DEVICE              (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
  50                                                 CONFIG_SYS_SCSI_MAX_LUN)
  51
  52 /* I2C */
  53
  54 /* GPIO */
  55 #ifdef CONFIG_DM_GPIO
  56 #ifndef CONFIG_MPC8XXX_GPIO
  57 #define CONFIG_MPC8XXX_GPIO
  58 #endif
  59 #endif
  60
  61 #define CONFIG_SYS_NS16550_SERIAL
  62 #define CONFIG_SYS_NS16550_REG_SIZE     1
  63 #define CONFIG_SYS_NS16550_CLK          (get_serial_clock())
  64
  65 #define CONFIG_SYS_BAUDRATE_TABLE       { 9600, 19200, 38400, 57600, 115200 }
  66
  67 #define CONFIG_SYS_HZ                   1000
  68
  69 #define CONFIG_HWCONFIG
  70 #define HWCONFIG_BUFFER_SIZE            128
  71
  72 #ifndef CONFIG_SPL_BUILD
  73 #define BOOT_TARGET_DEVICES(func) \
  74         func(MMC, mmc, 0) \
  75         func(USB, usb, 0) \
  76         func(SCSI, scsi, 0) \
  77         func(DHCP, dhcp, na)
  78 #include <config_distro_bootcmd.h>
  79 #endif
  80
  81 /* Initial environment variables */
  82 #define CONFIG_EXTRA_ENV_SETTINGS               \
  83         "verify=no\0"                           \
  84         "loadaddr=0x80100000\0"                 \
  85         "kernel_addr=0x100000\0"                \
  86         "initrd_high=0xffffffffffffffff\0"      \
  87         "kernel_start=0x1000000\0"              \
  88         "kernel_load=0xa0000000\0"              \
  89         "kernel_size=0x2800000\0"               \
  90         "bootm_size=0x10000000\0"               \
  91
  92 #undef CONFIG_BOOTCOMMAND
  93 #ifdef CONFIG_TFABOOT
  94 #define QSPI_NOR_BOOTCOMMAND    "sf probe 0:0; sf read $kernel_load "\
  95                                 "$kernel_start $kernel_size && "\
  96                                 "bootm $kernel_load"
  97 #else
  98 #define CONFIG_BOOTCOMMAND      "sf probe 0:0; sf read $kernel_load "\
  99                                 "$kernel_start $kernel_size && "\
 100                                 "bootm $kernel_load"
 101 #endif
 102
 103 /* Monitor Command Prompt */
 104 #define CONFIG_SYS_CBSIZE               512     /* Console I/O Buffer Size */
 105 #define CONFIG_SYS_MAXARGS              64      /* max command args */
 106
 107 #define CONFIG_SYS_BOOTM_LEN   (64 << 20)      /* Increase max gunzip size */
 108
 109 #include <asm/arch/soc.h>
 110
 111 #endif /* __LS1012A_COMMON_H */