include/configs/lacie_kw.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright (C) 2011 Simon Guinot <sguinot@lacie.com>
   4  */
   5
   6 #ifndef _CONFIG_LACIE_KW_H
   7 #define _CONFIG_LACIE_KW_H
   8
   9 /*
  10  * Machine number definition
  11  */
  12 #if defined(CONFIG_INETSPACE_V2)
  13 #define CONFIG_MACH_TYPE                MACH_TYPE_INETSPACE_V2
  14 #elif defined(CONFIG_NETSPACE_V2)
  15 #define CONFIG_MACH_TYPE                MACH_TYPE_NETSPACE_V2
  16 #elif defined(CONFIG_NETSPACE_LITE_V2)
  17 #define CONFIG_MACH_TYPE                MACH_TYPE_NETSPACE_LITE_V2
  18 #elif defined(CONFIG_NETSPACE_MINI_V2)
  19 #define CONFIG_MACH_TYPE                MACH_TYPE_NETSPACE_MINI_V2
  20 #elif defined(CONFIG_NETSPACE_MAX_V2)
  21 #define CONFIG_MACH_TYPE                MACH_TYPE_NETSPACE_MAX_V2
  22 #elif defined(CONFIG_D2NET_V2)
  23 #define CONFIG_MACH_TYPE                MACH_TYPE_D2NET_V2
  24 #elif defined(CONFIG_NET2BIG_V2)
  25 #define CONFIG_MACH_TYPE                MACH_TYPE_NET2BIG_V2
  26 #else
  27 #error "Unknown board"
  28 #endif
  29
  30 /*
  31  * High Level Configuration Options (easy to change)
  32  */
  33 #define CONFIG_FEROCEON_88FR131         /* CPU Core subversion */
  34 /* SoC name */
  35 #if defined(CONFIG_NETSPACE_LITE_V2) || defined(CONFIG_NETSPACE_MINI_V2)
  36 #define CONFIG_KW88F6192
  37 #else
  38 #define CONFIG_KW88F6281
  39 #endif
  40 #define CONFIG_SKIP_LOWLEVEL_INIT       /* disable board lowlevel_init */
  41
  42 /*
  43  * Core clock definition
  44  */
  45 #define CONFIG_SYS_TCLK                 166000000 /* 166MHz */
  46
  47 /*
  48  * SDRAM configuration
  49  */
  50
  51 /*
  52  * Different SDRAM configuration and size for some of the boards derived
  53  * from the Network Space v2
  54  */
  55 #if defined(CONFIG_INETSPACE_V2)
  56 #define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage-is2.cfg
  57 #elif defined(CONFIG_NETSPACE_LITE_V2) || defined(CONFIG_NETSPACE_MINI_V2)
  58 #define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage-ns2l.cfg
  59 #endif
  60
  61 /*
  62  * mv-common.h should be defined after CMD configs since it used them
  63  * to enable certain macros
  64  */
  65 #include "mv-common.h"
  66
  67 /* Remove or override few declarations from mv-common.h */
  68 #undef CONFIG_SYS_IDE_MAXBUS
  69 #undef CONFIG_SYS_IDE_MAXDEVICE
  70
  71 /*
  72  * Enable platform initialisation via misc_init_r() function
  73  */
  74
  75 /*
  76  * Ethernet Driver configuration
  77  */
  78 #ifdef CONFIG_CMD_NET
  79 #define CONFIG_MVGBE_PORTS              {1, 0} /* enable port 0 only */
  80 #endif
  81
  82 /*
  83  * SATA Driver configuration
  84  */
  85
  86 #ifdef CONFIG_SATA
  87 #define CONFIG_SYS_64BIT_LBA
  88 #define CONFIG_LBA48
  89 #if defined(CONFIG_NETSPACE_MAX_V2) || defined(CONFIG_D2NET_V2) || \
  90         defined(CONFIG_NET2BIG_V2)
  91 #define CONFIG_SYS_SATA_MAX_DEVICE      2
  92 #else
  93 #define CONFIG_SYS_SATA_MAX_DEVICE      1
  94 #endif
  95 #endif /* CONFIG_SATA */
  96
  97 /*
  98  * Enable GPI0 support
  99  */
 100 #define CONFIG_KIRKWOOD_GPIO
 101
 102 /*
 103  * Enable I2C support
 104  */
 105 #ifdef CONFIG_CMD_I2C
 106 /* I2C EEPROM HT24LC04 (512B - 32 pages of 16 Bytes) */
 107 #define CONFIG_SYS_I2C_EEPROM_ADDR              0x50
 108 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS       4 /* 16-byte page size */
 109 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN          1 /* 8-bit device address */
 110 #if defined(CONFIG_NET2BIG_V2)
 111 #define CONFIG_SYS_I2C_G762_ADDR                0x3e
 112 #endif
 113 #endif /* CONFIG_CMD_I2C */
 114
 115 /*
 116  * Partition support
 117  */
 118
 119 /*
 120  * File systems support
 121  */
 122
 123 /*
 124  * Environment variables configurations
 125  */
 126
 127 /*
 128  * Default environment variables
 129  */
 130 #define CONFIG_BOOTCOMMAND                                      \
 131         "dhcp && run netconsole; "                              \
 132         "if run usbload || run diskload; then bootm; fi"
 133
 134 #define CONFIG_EXTRA_ENV_SETTINGS                               \
 135         "stdin=serial\0"                                        \
 136         "stdout=serial\0"                                       \
 137         "stderr=serial\0"                                       \
 138         "bootfile=uImage\0"                                     \
 139         "loadaddr=0x800000\0"                                   \
 140         "autoload=no\0"                                         \
 141         "netconsole="                                           \
 142                 "set stdin $stdin,nc; "                         \
 143                 "set stdout $stdout,nc; "                       \
 144                 "set stderr $stderr,nc;\0"                      \
 145         "diskload=sata init && "                                \
 146                 "ext2load sata 0:1 $loadaddr /boot/$bootfile\0" \
 147         "usbload=usb start && "                                 \
 148                 "fatload usb 0:1 $loadaddr /boot/$bootfile\0"
 149
 150 #endif /* _CONFIG_LACIE_KW_H */