include/configs/kontron_pitx_imx8m.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2
   3 #ifndef __KONTRON_PITX_IMX8M_H
   4 #define __KONTRON_PITX_IMX8M_H
   5
   6 #include <linux/sizes.h>
   7 #include <linux/stringify.h>
   8 #include <asm/arch/imx-regs.h>
   9
  10 #define CONFIG_SYS_BOOTM_LEN            (32 * SZ_1M)
  11
  12 #define CONFIG_SYS_MONITOR_LEN          (512 * SZ_1K)
  13
  14 /* GUID for capsule updatable firmware image */
  15 #define KONTRON_PITX_IMX8M_FIT_IMAGE_GUID \
  16         EFI_GUID(0xc898e959, 0x5b1f, 0x4e6d, 0x88, 0xe0, \
  17                  0x40, 0xd4, 0x5c, 0xca, 0x13, 0x99)
  18
  19 #ifdef CONFIG_SPL_BUILD
  20 #define CONFIG_SYS_SPL_PTE_RAM_BASE     0x41580000
  21
  22 /* malloc f used before GD_FLG_FULL_MALLOC_INIT set */
  23 #define CONFIG_MALLOC_F_ADDR            0x182000
  24 /* For RAW image gives a error info not panic */
  25
  26
  27 #define CONFIG_POWER_PFUZE100
  28 #define CONFIG_POWER_PFUZE100_I2C_ADDR  0x08
  29 #endif
  30
  31 /* ENET1 Config */
  32 #if defined(CONFIG_CMD_NET)
  33 #define CONFIG_FEC_MXC_PHYADDR          0
  34
  35 #define PHY_ANEG_TIMEOUT                20000
  36
  37 #endif
  38
  39 #define ENV_MEM_LAYOUT_SETTINGS \
  40         "loadaddr=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
  41         "kernel_addr_r=0x42000000\0" \
  42         "fdt_addr_r=0x48000000\0" \
  43         "fdtoverlay_addr_r=0x49000000\0" \
  44         "ramdisk_addr_r=0x48080000\0" \
  45         "scriptaddr=0x40000000\0" \
  46         "pxefile_addr_r=0x40100000\0"
  47
  48 #define BOOT_TARGET_DEVICES(func) \
  49         func(MMC, mmc, 0) \
  50         func(MMC, mmc, 1) \
  51         func(USB, usb, 0) \
  52         func(DHCP, dhcp, na) \
  53         func(PXE, pxe, 0)
  54
  55 #include <config_distro_bootcmd.h>
  56
  57 /* Initial environment variables */
  58 #define CONFIG_EXTRA_ENV_SETTINGS               \
  59         "image=Image\0" \
  60         "console=ttymxc2,115200\0" \
  61         "boot_fdt=try\0" \
  62         "fdtfile=freescale/imx8mq-kontron-pitx-imx8m.dtb\0" \
  63         "dfu_alt_info=mmc 0=flash-bin raw 0x42 0x1000 mmcpart 1\0"\
  64         ENV_MEM_LAYOUT_SETTINGS \
  65         BOOTENV
  66
  67
  68 #define CONFIG_SYS_INIT_RAM_ADDR        0x40000000
  69 #define CONFIG_SYS_INIT_RAM_SIZE        0x80000
  70
  71 #define CONFIG_SYS_SDRAM_BASE           0x40000000
  72 #define PHYS_SDRAM                      0x40000000
  73 #define PHYS_SDRAM_SIZE                 0xC0000000 /* 3GB DDR */
  74
  75 #define CONFIG_MXC_UART_BASE            UART_BASE_ADDR(3)
  76
  77 #define CONFIG_SYS_FSL_USDHC_NUM        2
  78 #define CONFIG_SYS_FSL_ESDHC_ADDR       0
  79
  80 #endif