include/configs/kmeter1.h

   1 /*
   2  * Copyright (C) 2006 Freescale Semiconductor, Inc.
   3  *                    Dave Liu <daveliu@freescale.com>
   4  *
   5  * Copyright (C) 2007 Logic Product Development, Inc.
   6  *                    Peter Barada <peterb@logicpd.com>
   7  *
   8  * Copyright (C) 2007 MontaVista Software, Inc.
   9  *                    Anton Vorontsov <avorontsov@ru.mvista.com>
  10  *
  11  * (C) Copyright 2008
  12  * Heiko Schocher, DENX Software Engineering, hs@denx.de.
  13  *
  14  * This program is free software; you can redistribute it and/or
  15  * modify it under the terms of the GNU General Public License as
  16  * published by the Free Software Foundation; either version 2 of
  17  * the License, or (at your option) any later version.
  18  */
  19
  20 #ifndef __CONFIG_H
  21 #define __CONFIG_H
  22
  23 /*
  24  * High Level Configuration Options
  25  */
  26 #define CONFIG_E300             1 /* E300 family */
  27 #define CONFIG_QE               1 /* Has QE */
  28 #define CONFIG_MPC83xx          1 /* MPC83xx family */
  29 #define CONFIG_MPC8360          1 /* MPC8360 CPU specific */
  30 #define CONFIG_KMETER1          1 /* KMETER1 board specific */
  31 #define CONFIG_HOSTNAME         kmeter1
  32
  33 #define CONFIG_SYS_TEXT_BASE    0xF0000000
  34
  35 /* include common defines/options for all Keymile boards */
  36 #include "keymile-common.h"
  37
  38 #define CONFIG_KM_UBI_PARTITION_NAME    "ubi0"
  39
  40 #define MTDIDS_DEFAULT          "nor0=boot"
  41 #define MTDPARTS_DEFAULT        \
  42         "mtdparts=boot:768k(u-boot),128k(env),128k(envred),"    \
  43         "-(" CONFIG_KM_UBI_PARTITION_NAME ")"
  44
  45 #define CONFIG_MISC_INIT_R      1
  46 /*
  47  * System Clock Setup
  48  */
  49 #define CONFIG_83XX_CLKIN               66000000
  50 #define CONFIG_SYS_CLK_FREQ             66000000
  51 #define CONFIG_83XX_PCICLK              66000000
  52
  53 /*
  54  * Hardware Reset Configuration Word
  55  */
  56 #define CONFIG_SYS_HRCW_LOW (\
  57         HRCWL_CSB_TO_CLKIN_4X1 | \
  58         HRCWL_CORE_TO_CSB_2X1 | \
  59         HRCWL_CE_PLL_VCO_DIV_2 | \
  60         HRCWL_CE_TO_PLL_1X6 )
  61
  62 #define CONFIG_SYS_HRCW_HIGH (\
  63         HRCWH_CORE_ENABLE | \
  64         HRCWH_FROM_0X00000100 | \
  65         HRCWH_BOOTSEQ_DISABLE | \
  66         HRCWH_SW_WATCHDOG_DISABLE | \
  67         HRCWH_ROM_LOC_LOCAL_16BIT | \
  68         HRCWH_BIG_ENDIAN | \
  69         HRCWH_LALE_EARLY | \
  70         HRCWH_LDP_CLEAR )
  71
  72 /*
  73  * System IO Config
  74  */
  75 #define CONFIG_SYS_SICRH                0x00000006
  76 #define CONFIG_SYS_SICRL                0x00000000
  77
  78 /*
  79  * IMMR new address
  80  */
  81 #define CONFIG_SYS_IMMR         0xE0000000
  82
  83 /*
  84  * Bus Arbitration Configuration Register (ACR)
  85  */
  86 #define CONFIG_SYS_ACR_PIPE_DEP 3       /* pipeline depth 4 transactions */
  87 #define CONFIG_SYS_ACR_RPTCNT   3       /* 4 consecutive transactions */
  88 #define CONFIG_SYS_ACR_APARK    0       /* park bus to master (below) */
  89 #define CONFIG_SYS_ACR_PARKM    3       /* parking master = QuiccEngine */
  90
  91 /*
  92  * DDR Setup
  93  */
  94 #define CONFIG_SYS_DDR_BASE             0x00000000 /* DDR is system memory */
  95 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_BASE
  96 #define CONFIG_SYS_DDR_SDRAM_BASE       CONFIG_SYS_DDR_BASE
  97 #define CONFIG_SYS_DDR_SDRAM_CLK_CNTL   (DDR_SDRAM_CLK_CNTL_SS_EN | \
  98                                         DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05)
  99
 100 #define CFG_83XX_DDR_USES_CS0
 101
 102 #undef CONFIG_DDR_ECC
 103
 104 /*
 105  * DDRCDR - DDR Control Driver Register
 106  */
 107
 108 #undef CONFIG_SPD_EEPROM        /* Do not use SPD EEPROM for DDR setup */
 109
 110 /*
 111  * Manually set up DDR parameters
 112  */
 113 #define CONFIG_DDR_II
 114 #define CONFIG_SYS_DDR_SIZE             2048 /* MB */
 115 #define CONFIG_SYS_DDR_CS0_BNDS         0x0000007f
 116 #define CONFIG_SYS_DDR_CS0_CONFIG       (CSCONFIG_EN | CSCONFIG_AP | \
 117                                          CSCONFIG_ROW_BIT_13 | \
 118                                          CSCONFIG_COL_BIT_10 | CSCONFIG_ODT_WR_ACS)
 119
 120 #define CONFIG_SYS_DDR_SDRAM_CFG        (SDRAM_CFG_SDRAM_TYPE_DDR2 | \
 121                                          SDRAM_CFG_SREN)
 122 #define CONFIG_SYS_DDR_SDRAM_CFG2       0x00401000
 123 #define CONFIG_SYS_DDR_CLK_CNTL (DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05)
 124 #define CONFIG_SYS_DDR_INTERVAL ((0x080 << SDRAM_INTERVAL_BSTOPRE_SHIFT) | \
 125                                  (0x3cf << SDRAM_INTERVAL_REFINT_SHIFT))
 126
 127 #define CONFIG_SYS_DDRCDR               0x40000001
 128 #define CONFIG_SYS_DDR_MODE             0x47860452
 129 #define CONFIG_SYS_DDR_MODE2            0x8080c000
 130
 131 #define CONFIG_SYS_DDR_TIMING_0 ((2 << TIMING_CFG0_MRS_CYC_SHIFT) | \
 132                                  (8 << TIMING_CFG0_ODT_PD_EXIT_SHIFT) | \
 133                                  (6 << TIMING_CFG0_PRE_PD_EXIT_SHIFT) | \
 134                                  (2 << TIMING_CFG0_ACT_PD_EXIT_SHIFT) | \
 135                                  (0 << TIMING_CFG0_WWT_SHIFT) | \
 136                                  (0 << TIMING_CFG0_RRT_SHIFT) | \
 137                                  (0 << TIMING_CFG0_WRT_SHIFT) | \
 138                                  (0 << TIMING_CFG0_RWT_SHIFT))
 139
 140 #define CONFIG_SYS_DDR_TIMING_1 ((      TIMING_CFG1_CASLAT_50) | \
 141                                  ( 2 << TIMING_CFG1_WRTORD_SHIFT) | \
 142                                  ( 2 << TIMING_CFG1_ACTTOACT_SHIFT) | \
 143                                  ( 3 << TIMING_CFG1_WRREC_SHIFT) | \
 144                                  ( 7 << TIMING_CFG1_REFREC_SHIFT) | \
 145                                  ( 3 << TIMING_CFG1_ACTTORW_SHIFT) | \
 146                                  ( 8 << TIMING_CFG1_ACTTOPRE_SHIFT) | \
 147                                  ( 3 << TIMING_CFG1_PRETOACT_SHIFT))
 148
 149 #define CONFIG_SYS_DDR_TIMING_2 ((8 << TIMING_CFG2_FOUR_ACT_SHIFT) | \
 150                                  (3 << TIMING_CFG2_CKE_PLS_SHIFT) | \
 151                                  (2 << TIMING_CFG2_WR_DATA_DELAY_SHIFT) | \
 152                                  (2 << TIMING_CFG2_RD_TO_PRE_SHIFT) | \
 153                                  (4 << TIMING_CFG2_WR_LAT_DELAY_SHIFT) | \
 154                                  (0 << TIMING_CFG2_ADD_LAT_SHIFT) | \
 155                                  (5 << TIMING_CFG2_CPO_SHIFT))
 156
 157 #define CONFIG_SYS_DDR_TIMING_3 0x00000000
 158
 159 /*
 160  * The reserved memory
 161  */
 162 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */
 163 #define CONFIG_SYS_FLASH_BASE           0xF0000000
 164 #define CONFIG_SYS_PIGGY_BASE           0xE8000000
 165 #define CONFIG_SYS_PIGGY_SIZE           128
 166 #define CONFIG_SYS_PAXE_BASE            0xA0000000
 167 #define CONFIG_SYS_PAXE_SIZE            512
 168
 169 #if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
 170 #define CONFIG_SYS_RAMBOOT
 171 #else
 172 #undef  CONFIG_SYS_RAMBOOT
 173 #endif
 174
 175 #define CONFIG_SYS_MONITOR_LEN          (384 * 1024) /* Reserve 384 kB for Mon */
 176
 177 /*
 178  * Initial RAM Base Address Setup
 179  */
 180 #define CONFIG_SYS_INIT_RAM_LOCK        1
 181 #define CONFIG_SYS_INIT_RAM_ADDR        0xE6000000 /* Initial RAM address */
 182 #define CONFIG_SYS_INIT_RAM_SIZE        0x1000 /* Size of used area in RAM */
 183 #define CONFIG_SYS_GBL_DATA_SIZE        0x100 /* num bytes initial data */
 184 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE)
 185
 186 /*
 187  * Local Bus Configuration & Clock Setup
 188  */
 189 #define CONFIG_SYS_LCRR_DBYP    LCRR_DBYP
 190 #define CONFIG_SYS_LCRR_EADC    LCRR_EADC_2
 191 #define CONFIG_SYS_LCRR_CLKDIV  LCRR_CLKDIV_4
 192
 193 /*
 194  * Init Local Bus Memory Controller:
 195  *
 196  * Bank Bus     Machine PortSz  Size  Device
 197  * ---- ---     ------- ------  -----  ------
 198  *  0   Local   GPCM    16 bit  256MB FLASH
 199  *  1   Local   GPCM     8 bit  128MB GPIO/PIGGY
 200  *  3   Local   GPCM     8 bit  512MB PAXE
 201  *
 202  */
 203 /*
 204  * FLASH on the Local Bus
 205  */
 206 #define CONFIG_SYS_FLASH_CFI            /* use the Common Flash Interface */
 207 #define CONFIG_FLASH_CFI_DRIVER         /* use the CFI driver */
 208 #define CONFIG_SYS_FLASH_SIZE           256 /* max FLASH size is 256M */
 209 #define CONFIG_SYS_FLASH_PROTECTION     1
 210 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE       1
 211
 212 #define CONFIG_SYS_LBLAWBAR0_PRELIM     CONFIG_SYS_FLASH_BASE /* Window base at flash base */
 213 #define CONFIG_SYS_LBLAWAR0_PRELIM      0x8000001b /* 256MB window size */
 214
 215 #define CONFIG_SYS_BR0_PRELIM   (CONFIG_SYS_FLASH_BASE | \
 216                                 (2 << BR_PS_SHIFT) | /* 16 bit port size */ \
 217                                 BR_V)
 218
 219 #define CONFIG_SYS_OR0_PRELIM   (MEG_TO_AM(CONFIG_SYS_FLASH_SIZE) | \
 220                                 OR_GPCM_CSNT | OR_GPCM_ACS_DIV2 | \
 221                                 OR_GPCM_SCY_5 | \
 222                                 OR_GPCM_TRLX | OR_GPCM_EAD)
 223
 224 #define CONFIG_SYS_MAX_FLASH_BANKS      1       /* max num of flash banks       */
 225 #define CONFIG_SYS_MAX_FLASH_SECT       512     /* max num of sects on one chip */
 226 #define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE }
 227
 228 #undef  CONFIG_SYS_FLASH_CHECKSUM
 229
 230 /*
 231  * PRIO1/PIGGY on the local bus CS1
 232  */
 233 #define CONFIG_SYS_LBLAWBAR1_PRELIM     CONFIG_SYS_PIGGY_BASE /* Window base at flash base */
 234 #define CONFIG_SYS_LBLAWAR1_PRELIM      0x8000001A /* 128MB window size */
 235
 236 #define CONFIG_SYS_BR1_PRELIM   (CONFIG_SYS_PIGGY_BASE | \
 237                                 (1 << BR_PS_SHIFT) | /* 8 bit port size */ \
 238                                 BR_V)
 239 #define CONFIG_SYS_OR1_PRELIM           (MEG_TO_AM(CONFIG_SYS_PIGGY_SIZE) | /* 128MB */ \
 240                                 OR_GPCM_CSNT | OR_GPCM_ACS_DIV2 | \
 241                                 OR_GPCM_SCY_2 | \
 242                                 OR_GPCM_TRLX | OR_GPCM_EAD)
 243
 244 /*
 245  * PAXE on the local bus CS3
 246  */
 247 #define CONFIG_SYS_LBLAWBAR3_PRELIM     CONFIG_SYS_PAXE_BASE /* Window base at flash base */
 248 #define CONFIG_SYS_LBLAWAR3_PRELIM      0x8000001C /* 512MB window size */
 249
 250 #define CONFIG_SYS_BR3_PRELIM   (CONFIG_SYS_PAXE_BASE | \
 251                                 (1 << BR_PS_SHIFT) | /* 8 bit port size */ \
 252                                 BR_V)
 253 #define CONFIG_SYS_OR3_PRELIM   (MEG_TO_AM(CONFIG_SYS_PAXE_SIZE) | \
 254                                 OR_GPCM_CSNT | OR_GPCM_ACS_DIV2 | \
 255                                 OR_GPCM_SCY_2 | \
 256                                 OR_GPCM_TRLX | OR_GPCM_EAD)
 257
 258 /*
 259  * Serial Port
 260  */
 261 #define CONFIG_CONS_INDEX       1
 262 #define CONFIG_SYS_NS16550
 263 #define CONFIG_SYS_NS16550_SERIAL
 264 #define CONFIG_SYS_NS16550_REG_SIZE     1
 265 #define CONFIG_SYS_NS16550_CLK          get_bus_freq(0)
 266
 267 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_IMMR+0x4500)
 268 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_IMMR+0x4600)
 269
 270 /* Pass open firmware flat tree */
 271 #define CONFIG_OF_LIBFDT        1
 272 #define CONFIG_OF_BOARD_SETUP   1
 273 #define CONFIG_OF_STDOUT_VIA_ALIAS
 274
 275 /*
 276  * General PCI
 277  * Addresses are mapped 1-1.
 278  */
 279 #undef CONFIG_PCI               /* No PCI */
 280
 281 #ifndef CONFIG_NET_MULTI
 282 #define CONFIG_NET_MULTI        1
 283 #endif
 284 /*
 285  * QE UEC ethernet configuration
 286  */
 287 #define CONFIG_UEC_ETH
 288 #define CONFIG_ETHPRIME         "UEC0"
 289
 290 #define CONFIG_UEC_ETH1         /* GETH1 */
 291 #define UEC_VERBOSE_DEBUG       1
 292
 293 #ifdef CONFIG_UEC_ETH1
 294 #define CONFIG_SYS_UEC1_UCC_NUM 3       /* UCC4 */
 295 #define CONFIG_SYS_UEC1_RX_CLK          QE_CLK_NONE     /* not used in RMII Mode */
 296 #define CONFIG_SYS_UEC1_TX_CLK          QE_CLK17
 297 #define CONFIG_SYS_UEC1_ETH_TYPE        FAST_ETH
 298 #define CONFIG_SYS_UEC1_PHY_ADDR        0
 299 #define CONFIG_SYS_UEC1_INTERFACE_TYPE RMII
 300 #define CONFIG_SYS_UEC1_INTERFACE_SPEED 100
 301 #endif
 302
 303 /*
 304  * Environment
 305  */
 306
 307 #ifndef CONFIG_SYS_RAMBOOT
 308 #define CONFIG_ENV_IS_IN_FLASH  1
 309 #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)
 310 #define CONFIG_ENV_SECT_SIZE    0x20000 /* 128K(one sector) for env */
 311 #define CONFIG_ENV_OFFSET       (CONFIG_SYS_MONITOR_LEN)
 312
 313 /* Address and size of Redundant Environment Sector     */
 314 #define CONFIG_ENV_OFFSET_REDUND        (CONFIG_ENV_OFFSET+CONFIG_ENV_SECT_SIZE)
 315 #define CONFIG_ENV_SIZE_REDUND  (CONFIG_ENV_SIZE)
 316
 317 #else /* CFG_RAMBOOT */
 318 #define CONFIG_SYS_NO_FLASH             1       /* Flash is not usable now */
 319 #define CONFIG_ENV_IS_NOWHERE   1       /* Store ENV in memory only */
 320 #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE - 0x1000)
 321 #define CONFIG_ENV_SIZE         0x2000
 322 #endif /* CFG_RAMBOOT */
 323
 324 /* I2C */
 325 #define CONFIG_HARD_I2C         /* I2C with hardware support */
 326 #undef  CONFIG_SOFT_I2C         /* I2C bit-banged */
 327 #define CONFIG_FSL_I2C
 328 #define CONFIG_SYS_I2C_SPEED    200000  /* I2C speed and slave address */
 329 #define CONFIG_SYS_I2C_SLAVE    0x7F
 330 #define CONFIG_SYS_I2C_OFFSET   0x3000
 331 #define CONFIG_I2C_MULTI_BUS    1
 332 #define CONFIG_I2C_MUX          1
 333
 334 /* EEprom support */
 335 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN  2
 336
 337 /* I2C SYSMON (LM75, AD7414 is almost compatible)                       */
 338 #define CONFIG_DTT_LM75         1       /* ON Semi's LM75               */
 339 #define CONFIG_DTT_SENSORS      {0, 1, 2, 3}    /* Sensor addresses             */
 340 #define CONFIG_SYS_DTT_MAX_TEMP 70
 341 #define CONFIG_SYS_DTT_LOW_TEMP -30
 342 #define CONFIG_SYS_DTT_HYSTERESIS       3
 343 #define CONFIG_SYS_DTT_BUS_NUM          (CONFIG_SYS_MAX_I2C_BUS)
 344
 345 #if defined(CONFIG_CMD_NAND)
 346 #define CONFIG_NAND_KMETER1
 347 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 348 #define CONFIG_SYS_NAND_BASE            CONFIG_SYS_PIGGY_BASE
 349 #endif
 350
 351 #if defined(CONFIG_PCI)
 352 #define CONFIG_CMD_PCI
 353 #endif
 354
 355 #if defined(CFG_RAMBOOT)
 356 #undef CONFIG_CMD_SAVEENV
 357 #undef CONFIG_CMD_LOADS
 358 #endif
 359
 360 /*
 361  * For booting Linux, the board info and command line data
 362  * have to be in the first 256 MB of memory, since this is
 363  * the maximum mapped by the Linux kernel during initialization.
 364  */
 365 #define CONFIG_SYS_BOOTMAPSZ            (256 << 20) /* Initial Memory map for Linux */
 366
 367 /*
 368  * Core HID Setup
 369  */
 370 #define CONFIG_SYS_HID0_INIT            0x000000000
 371 #define CONFIG_SYS_HID0_FINAL           (HID0_ENABLE_MACHINE_CHECK | \
 372                                          HID0_ENABLE_INSTRUCTION_CACHE)
 373 #define CONFIG_SYS_HID2                 HID2_HBE
 374
 375 /*
 376  * MMU Setup
 377  */
 378
 379 #define CONFIG_HIGH_BATS        1       /* High BATs supported */
 380
 381 /* DDR: cache cacheable */
 382 #define CONFIG_SYS_IBAT0L       (CONFIG_SYS_SDRAM_BASE | BATL_PP_10 | \
 383                                 BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
 384 #define CONFIG_SYS_IBAT0U       (CONFIG_SYS_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
 385 #define CONFIG_SYS_DBAT0L       CONFIG_SYS_IBAT0L
 386 #define CONFIG_SYS_DBAT0U       CONFIG_SYS_IBAT0U
 387
 388 /* IMMRBAR & PCI IO: cache-inhibit and guarded */
 389 #define CONFIG_SYS_IBAT1L       (CONFIG_SYS_IMMR | BATL_PP_10 | \
 390                                 BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
 391 #define CONFIG_SYS_IBAT1U       (CONFIG_SYS_IMMR | BATU_BL_4M | BATU_VS | BATU_VP)
 392 #define CONFIG_SYS_DBAT1L       CONFIG_SYS_IBAT1L
 393 #define CONFIG_SYS_DBAT1U       CONFIG_SYS_IBAT1U
 394
 395 /* PRIO1, PIGGY:  icache cacheable, but dcache-inhibit and guarded */
 396 #define CONFIG_SYS_IBAT2L       (CONFIG_SYS_PIGGY_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
 397 #define CONFIG_SYS_IBAT2U       (CONFIG_SYS_PIGGY_BASE | BATU_BL_128M | BATU_VS | BATU_VP)
 398 #define CONFIG_SYS_DBAT2L       (CONFIG_SYS_PIGGY_BASE | BATL_PP_10 | \
 399                                  BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
 400 #define CONFIG_SYS_DBAT2U       CONFIG_SYS_IBAT2U
 401
 402 /* FLASH: icache cacheable, but dcache-inhibit and guarded */
 403 #define CONFIG_SYS_IBAT3L       (CONFIG_SYS_FLASH_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
 404 #define CONFIG_SYS_IBAT3U       (CONFIG_SYS_FLASH_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
 405 #define CONFIG_SYS_DBAT3L       (CONFIG_SYS_FLASH_BASE | BATL_PP_10 | \
 406                                  BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
 407 #define CONFIG_SYS_DBAT3U       CONFIG_SYS_IBAT3U
 408
 409 /* Stack in dcache: cacheable, no memory coherence */
 410 #define CONFIG_SYS_IBAT4L       (CONFIG_SYS_INIT_RAM_ADDR | BATL_PP_10)
 411 #define CONFIG_SYS_IBAT4U       (CONFIG_SYS_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP)
 412 #define CONFIG_SYS_DBAT4L       CONFIG_SYS_IBAT4L
 413 #define CONFIG_SYS_DBAT4U       CONFIG_SYS_IBAT4U
 414
 415 /* PAXE:  icache cacheable, but dcache-inhibit and guarded */
 416 #define CONFIG_SYS_IBAT5L       (CONFIG_SYS_PAXE_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
 417 #define CONFIG_SYS_IBAT5U       (CONFIG_SYS_PAXE_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
 418 #define CONFIG_SYS_DBAT5L       (CONFIG_SYS_PAXE_BASE | BATL_PP_10 | \
 419                                  BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
 420 #define CONFIG_SYS_DBAT5U       CONFIG_SYS_IBAT5U
 421
 422 #ifdef CONFIG_PCI
 423 /* PCI MEM space: cacheable */
 424 #define CFG_IBAT6L      (CFG_PCI1_MEM_PHYS | BATL_PP_10 | BATL_MEMCOHERENCE)
 425 #define CFG_IBAT6U      (CFG_PCI1_MEM_PHYS | BATU_BL_256M | BATU_VS | BATU_VP)
 426 #define CFG_DBAT6L      CFG_IBAT6L
 427 #define CFG_DBAT6U      CFG_IBAT6U
 428 /* PCI MMIO space: cache-inhibit and guarded */
 429 #define CFG_IBAT7L      (CFG_PCI1_MMIO_PHYS | BATL_PP_10 | \
 430                          BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
 431 #define CFG_IBAT7U      (CFG_PCI1_MMIO_PHYS | BATU_BL_256M | BATU_VS | BATU_VP)
 432 #define CFG_DBAT7L      CFG_IBAT7L
 433 #define CFG_DBAT7U      CFG_IBAT7U
 434 #else /* CONFIG_PCI */
 435 #define CONFIG_SYS_IBAT6L       (0)
 436 #define CONFIG_SYS_IBAT6U       (0)
 437 #define CONFIG_SYS_IBAT7L       (0)
 438 #define CONFIG_SYS_IBAT7U       (0)
 439 #define CONFIG_SYS_DBAT6L       CONFIG_SYS_IBAT6L
 440 #define CONFIG_SYS_DBAT6U       CONFIG_SYS_IBAT6U
 441 #define CONFIG_SYS_DBAT7L       CONFIG_SYS_IBAT7L
 442 #define CONFIG_SYS_DBAT7U       CONFIG_SYS_IBAT7U
 443 #endif /* CONFIG_PCI */
 444
 445 #define BOOTFLASH_START F0000000
 446
 447 #define CONFIG_PRAM     512     /* protected RAM [KBytes] */
 448
 449 /*
 450  * Environment Configuration
 451  */
 452 #define CONFIG_ENV_OVERWRITE
 453 #ifndef CONFIG_KM_DEF_ENV               /* if not set by keymile-common.h */
 454 #define CONFIG_KM_DEF_ENV "km-common=empty\0"
 455 #endif
 456
 457 #define CONFIG_EXTRA_ENV_SETTINGS \
 458        CONFIG_KM_DEF_ENV                                                \
 459         "rootpath=/opt/eldk/ppc_82xx\0"                                 \
 460         "addcon=setenv bootargs ${bootargs} console=ttyS0,${baudrate}\0"\
 461         "ramdisk_file=/tftpboot/kmeter1/uRamdisk\0"                     \
 462         "loadram=tftp ${ramdisk_addr_r} ${ramdisk_file}\0"              \
 463         "loadfdt=tftp ${fdt_addr_r} ${fdt_file}\0"                      \
 464         "loadkernel=tftp ${kernel_addr_r} ${bootfile}\0"                \
 465         "unlock=yes\0"                                                  \
 466         "fdt_addr=F0080000\0"                                           \
 467         "kernel_addr=F00a0000\0"                                        \
 468         "ramdisk_addr=F03a0000\0"                                       \
 469         "ramdisk_addr_r=F10000\0"                                       \
 470         "EEprom_ivm=pca9547:70:9\0"                                     \
 471         "dtt_bus=pca9547:70:a\0"                                        \
 472         "mtdids=nor0=app \0"                                            \
 473         "mtdparts=" MK_STR(MTDPARTS_DEFAULT) "\0"                       \
 474    ""
 475
 476 #if defined(CONFIG_UEC_ETH)
 477 #define CONFIG_HAS_ETH0
 478 #endif
 479
 480 #endif /* __CONFIG_H */