include/configs/km/km_arm.h

   1 /*
   2  * (C) Copyright 2009
   3  * Marvell Semiconductor <www.marvell.com>
   4  * Prafulla Wadaskar <prafulla@marvell.com>
   5  *
   6  * (C) Copyright 2009
   7  * Stefan Roese, DENX Software Engineering, sr@denx.de.
   8  *
   9  * (C) Copyright 2010-2011
  10  * Heiko Schocher, DENX Software Engineering, hs@denx.de.
  11  *
  12  * SPDX-License-Identifier:     GPL-2.0+
  13  */
  14
  15 /*
  16  * for linking errors see
  17  * http://lists.denx.de/pipermail/u-boot/2009-July/057350.html
  18  */
  19
  20 #ifndef _CONFIG_KM_ARM_H
  21 #define _CONFIG_KM_ARM_H
  22
  23
  24 /* We got removed from Linux mach-types.h */
  25 #define MACH_TYPE_KM_KIRKWOOD          2255
  26
  27 /*
  28  * High Level Configuration Options (easy to change)
  29  */
  30 #define CONFIG_MARVELL
  31 #define CONFIG_FEROCEON_88FR131         /* CPU Core subversion */
  32 #define CONFIG_KW88F6281                /* SOC Name */
  33 #define CONFIG_MACH_KM_KIRKWOOD         /* Machine type */
  34
  35 #define CONFIG_MACH_TYPE        MACH_TYPE_KM_KIRKWOOD
  36
  37 #define CONFIG_NAND_ECC_BCH
  38 #define CONFIG_BCH
  39
  40 /* include common defines/options for all Keymile boards */
  41 #include "keymile-common.h"
  42
  43 #define CONFIG_CMD_NAND
  44
  45 /* SPI NOR Flash default params, used by sf commands */
  46 #define CONFIG_SF_DEFAULT_SPEED         8100000
  47 #define CONFIG_SF_DEFAULT_MODE          SPI_MODE_3
  48
  49 #if defined CONFIG_KM_ENV_IS_IN_SPI_NOR
  50 #define CONFIG_ENV_SPI_BUS              0
  51 #define CONFIG_ENV_SPI_CS               0
  52 #define CONFIG_ENV_SPI_MAX_HZ           8100000
  53 #define CONFIG_ENV_SPI_MODE             SPI_MODE_3
  54 #endif
  55
  56 /* Reserve 4 MB for malloc */
  57 #define CONFIG_SYS_MALLOC_LEN           (4 * 1024 * 1024)
  58
  59 #include "asm/arch/config.h"
  60
  61 #define CONFIG_SYS_TEXT_BASE    0x07d00000      /* code address before reloc */
  62 #define CONFIG_SYS_MEMTEST_START 0x00400000     /* 4M */
  63 #define CONFIG_SYS_MEMTEST_END  0x007fffff      /*(_8M -1) */
  64 #define CONFIG_SYS_LOAD_ADDR    0x00800000      /* default load adr- 8M */
  65
  66 /* pseudo-non volatile RAM [hex] */
  67 #define CONFIG_KM_PNVRAM        0x80000
  68 /* physical RAM MTD size [hex] */
  69 #define CONFIG_KM_PHRAM         0x17F000
  70
  71 #define CONFIG_KM_CRAMFS_ADDR   0x2400000
  72 #define CONFIG_KM_KERNEL_ADDR   0x2000000       /* 3098KBytes */
  73 #define CONFIG_KM_FDT_ADDR      0x23E0000       /*  128KBytes */
  74
  75 /* architecture specific default bootargs */
  76 #define CONFIG_KM_DEF_BOOT_ARGS_CPU                                     \
  77                 "bootcountaddr=${bootcountaddr} ${mtdparts}"            \
  78                 " boardid=0x${IVM_BoardId} hwkey=0x${IVM_HWKey}"
  79
  80 #define CONFIG_KM_DEF_ENV_CPU                                           \
  81         "u-boot="__stringify(CONFIG_HOSTNAME) "/u-boot.kwb\0"           \
  82         CONFIG_KM_UPDATE_UBOOT                                          \
  83         "set_fdthigh=setenv fdt_high ${kernelmem}\0"                    \
  84         "checkfdt="                                                     \
  85                 "if cramfsls fdt_0x${IVM_BoardId}_0x${IVM_HWKey}.dtb; " \
  86                 "then true; else setenv cramfsloadfdt true; "           \
  87                 "setenv boot bootm ${load_addr_r}; "                    \
  88                 "echo No FDT found, booting with the kernel "           \
  89                 "appended one; fi\0"                                    \
  90         ""
  91
  92 #define CONFIG_SKIP_LOWLEVEL_INIT       /* disable board lowlevel_init */
  93 #define CONFIG_MISC_INIT_R
  94
  95 /*
  96  * NS16550 Configuration
  97  */
  98 #define CONFIG_SYS_NS16550_SERIAL
  99 #define CONFIG_SYS_NS16550_REG_SIZE     (-4)
 100 #define CONFIG_SYS_NS16550_CLK          CONFIG_SYS_TCLK
 101 #define CONFIG_SYS_NS16550_COM1         KW_UART0_BASE
 102 #define CONFIG_SYS_NS16550_COM2         KW_UART1_BASE
 103
 104 /*
 105  * Serial Port configuration
 106  * The following definitions let you select what serial you want to use
 107  * for your console driver.
 108  */
 109
 110 #define CONFIG_CONS_INDEX       1       /* Console on UART0 */
 111
 112 /*
 113  * For booting Linux, the board info and command line data
 114  * have to be in the first 8 MB of memory, since this is
 115  * the maximum mapped by the Linux kernel during initialization.
 116  */
 117 #define CONFIG_BOOTMAPSZ        (8 << 20)       /* Initial Memmap for Linux */
 118 #define CONFIG_CMDLINE_TAG              /* enable passing of ATAGs  */
 119 #define CONFIG_INITRD_TAG               /* enable INITRD tag */
 120 #define CONFIG_SETUP_MEMORY_TAGS        /* enable memory tag */
 121
 122 /*
 123  * Commands configuration
 124  */
 125 #define CONFIG_CMD_MTDPARTS
 126
 127 /*
 128  * Without NOR FLASH we need this
 129  */
 130 #define CONFIG_SYS_NO_FLASH
 131
 132 /*
 133  * NAND Flash configuration
 134  */
 135 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 136
 137 #define BOOTFLASH_START         0x0
 138
 139 /* Kirkwood has two serial IF */
 140 #if (CONFIG_CONS_INDEX == 2)
 141 #define CONFIG_KM_CONSOLE_TTY   "ttyS1"
 142 #else
 143 #define CONFIG_KM_CONSOLE_TTY   "ttyS0"
 144 #endif
 145
 146 /*
 147  * Other required minimal configurations
 148  */
 149 #define CONFIG_CONSOLE_INFO_QUIET       /* some code reduction */
 150 #define CONFIG_ARCH_CPU_INIT            /* call arch_cpu_init() */
 151 #define CONFIG_ARCH_MISC_INIT           /* call arch_misc_init() */
 152 #define CONFIG_DISPLAY_CPUINFO          /* Display cpu info */
 153 #define CONFIG_NR_DRAM_BANKS    4
 154 #define CONFIG_SYS_RESET_ADDRESS 0xffff0000     /* Rst Vector Adr */
 155
 156 /*
 157  * Ethernet Driver configuration
 158  */
 159 #define CONFIG_NETCONSOLE       /* include NetConsole support   */
 160 #define CONFIG_MII              /* expose smi ove miiphy interface */
 161 #define CONFIG_CMD_MII          /* to debug mdio phy config */
 162 #define CONFIG_MVGBE            /* Enable Marvell Gbe Controller Driver */
 163 #define CONFIG_SYS_FAULT_ECHO_LINK_DOWN /* detect link using phy */
 164 #define CONFIG_MVGBE_PORTS      {1, 0}  /* enable port 0 only */
 165 #define CONFIG_PHY_BASE_ADR     0
 166 #define CONFIG_ENV_OVERWRITE    /* ethaddr can be reprogrammed */
 167 #define CONFIG_KM_COMMON_ETH_INIT /* standard km ethernet_present for piggy */
 168
 169 /*
 170  * UBI related stuff
 171  */
 172 #define CONFIG_SYS_USE_UBI
 173
 174 /*
 175  * I2C related stuff
 176  */
 177 #undef CONFIG_I2C_MVTWSI
 178 #define CONFIG_SYS_I2C
 179 #define CONFIG_SYS_I2C_SOFT     /* I2C bit-banged       */
 180 #define CONFIG_SYS_I2C_INIT_BOARD
 181
 182 #define CONFIG_KIRKWOOD_GPIO            /* Enable GPIO Support */
 183 #define CONFIG_SYS_NUM_I2C_BUSES        6
 184 #define CONFIG_SYS_I2C_MAX_HOPS         1
 185 #define CONFIG_SYS_I2C_BUSES    {       {0, {I2C_NULL_HOP} }, \
 186                                         {0, {{I2C_MUX_PCA9547, 0x70, 1} } }, \
 187                                         {0, {{I2C_MUX_PCA9547, 0x70, 2} } }, \
 188                                         {0, {{I2C_MUX_PCA9547, 0x70, 3} } }, \
 189                                         {0, {{I2C_MUX_PCA9547, 0x70, 4} } }, \
 190                                         {0, {{I2C_MUX_PCA9547, 0x70, 5} } }, \
 191                                 }
 192
 193 #ifndef __ASSEMBLY__
 194 #include <asm/arch/gpio.h>
 195 extern void __set_direction(unsigned pin, int high);
 196 void set_sda(int state);
 197 void set_scl(int state);
 198 int get_sda(void);
 199 int get_scl(void);
 200 #define KM_KIRKWOOD_SDA_PIN     8
 201 #define KM_KIRKWOOD_SCL_PIN     9
 202 #define KM_KIRKWOOD_SOFT_I2C_GPIOS      0x0300
 203 #define KM_KIRKWOOD_ENV_WP      38
 204
 205 #define I2C_ACTIVE      __set_direction(KM_KIRKWOOD_SDA_PIN, 0)
 206 #define I2C_TRISTATE    __set_direction(KM_KIRKWOOD_SDA_PIN, 1)
 207 #define I2C_READ        (kw_gpio_get_value(KM_KIRKWOOD_SDA_PIN) ? 1 : 0)
 208 #define I2C_SDA(bit)    kw_gpio_set_value(KM_KIRKWOOD_SDA_PIN, bit)
 209 #define I2C_SCL(bit)    kw_gpio_set_value(KM_KIRKWOOD_SCL_PIN, bit)
 210 #endif
 211
 212 #define I2C_DELAY       udelay(1)
 213 #define I2C_SOFT_DECLARATIONS
 214
 215 #define CONFIG_SYS_I2C_SOFT_SLAVE       0x0
 216 #define CONFIG_SYS_I2C_SOFT_SPEED       100000
 217
 218 /* EEprom support 24C128, 24C256 valid for environment eeprom */
 219 #define CONFIG_SYS_EEPROM_PAGE_WRITE_ENABLE
 220 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS       6 /* 64 Byte write page */
 221 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS   10
 222
 223 #define CONFIG_SYS_I2C_EEPROM_ADDR      0x50
 224 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN  2
 225
 226 /*
 227  *  Environment variables configurations
 228  */
 229 #if defined CONFIG_KM_ENV_IS_IN_SPI_NOR
 230 #define CONFIG_ENV_IS_IN_SPI_FLASH  /* use SPI-Flash for environment vars */
 231 #define CONFIG_ENV_OFFSET               0xc0000     /* no bracets! */
 232 #define CONFIG_ENV_SIZE                 0x02000     /* Size of Environment */
 233 #define CONFIG_ENV_SECT_SIZE            0x10000
 234 #define CONFIG_ENV_OFFSET_REDUND        (CONFIG_ENV_OFFSET + \
 235                                         CONFIG_ENV_SECT_SIZE)
 236 #define CONFIG_ENV_TOTAL_SIZE           0x20000     /* no bracets! */
 237 #else
 238 #define CONFIG_ENV_IS_IN_EEPROM         /* use EEPROM for environment vars */
 239 #define CONFIG_SYS_DEF_EEPROM_ADDR      0x50
 240 #define CONFIG_ENV_EEPROM_IS_ON_I2C
 241 #define CONFIG_SYS_EEPROM_WREN
 242 #define CONFIG_ENV_OFFSET               0x0 /* no bracets! */
 243 #define CONFIG_ENV_SIZE                 (0x2000 - CONFIG_ENV_OFFSET)
 244 #define CONFIG_I2C_ENV_EEPROM_BUS 5 /* I2C2 (Mux-Port 5) */
 245 #define CONFIG_ENV_OFFSET_REDUND        0x2000 /* no bracets! */
 246 #define CONFIG_ENV_SIZE_REDUND          (CONFIG_ENV_SIZE)
 247 #endif
 248
 249 #define CONFIG_SYS_REDUNDAND_ENVIRONMENT
 250
 251
 252 /* SPI bus claim MPP configuration */
 253 #define CONFIG_SYS_KW_SPI_MPP   0x0
 254
 255 #define FLASH_GPIO_PIN                  0x00010000
 256 #define KM_FLASH_GPIO_PIN       16
 257
 258 #ifndef MTDIDS_DEFAULT
 259 # define MTDIDS_DEFAULT         "nand0=orion_nand"
 260 #endif /* MTDIDS_DEFAULT */
 261
 262 #ifndef MTDPARTS_DEFAULT
 263 # define MTDPARTS_DEFAULT       "mtdparts="                     \
 264         "orion_nand:"                                           \
 265                 "-(" CONFIG_KM_UBI_PARTITION_NAME_BOOT ");"
 266 #endif /* MTDPARTS_DEFAULT */
 267
 268 #define CONFIG_KM_UPDATE_UBOOT                                          \
 269         "update="                                                       \
 270                 "sf probe 0;sf erase 0 +${filesize};"                   \
 271                 "sf write ${load_addr_r} 0 ${filesize};\0"
 272
 273 #if defined CONFIG_KM_ENV_IS_IN_SPI_NOR
 274 #define CONFIG_KM_NEW_ENV                                               \
 275         "newenv=sf probe 0;"                                            \
 276                 "sf erase " __stringify(CONFIG_ENV_OFFSET) " "          \
 277                 __stringify(CONFIG_ENV_TOTAL_SIZE)"\0"
 278 #else
 279 #define CONFIG_KM_NEW_ENV                                               \
 280         "newenv=setenv addr 0x100000 && "                               \
 281                 "i2c dev " __stringify(CONFIG_I2C_ENV_EEPROM_BUS) "; "  \
 282                 "mw.b ${addr} 0 4 && "                                  \
 283                 "eeprom write " __stringify(CONFIG_SYS_DEF_EEPROM_ADDR) \
 284                 " ${addr} " __stringify(CONFIG_ENV_OFFSET) " 4 && "     \
 285                 "eeprom write " __stringify(CONFIG_SYS_DEF_EEPROM_ADDR) \
 286                 " ${addr} " __stringify(CONFIG_ENV_OFFSET_REDUND) " 4\0"
 287 #endif
 288
 289 #ifndef CONFIG_KM_BOARD_EXTRA_ENV
 290 #define CONFIG_KM_BOARD_EXTRA_ENV       ""
 291 #endif
 292
 293 /*
 294  * Default environment variables
 295  */
 296 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
 297         CONFIG_KM_BOARD_EXTRA_ENV                                       \
 298         CONFIG_KM_DEF_ENV                                               \
 299         CONFIG_KM_NEW_ENV                                               \
 300         "arch=arm\0"                                                    \
 301         ""
 302
 303 #if defined(CONFIG_SYS_NO_FLASH)
 304 #undef  CONFIG_FLASH_CFI_MTD
 305 #undef  CONFIG_JFFS2_CMDLINE
 306 #endif
 307
 308 /* additions for new relocation code, must be added to all boards */
 309 #define CONFIG_SYS_SDRAM_BASE           0x00000000
 310 /* Do early setups now in board_init_f() */
 311 #define CONFIG_BOARD_EARLY_INIT_F
 312
 313 /*
 314  * resereved pram area at the end of memroy [hex]
 315  * 8Mbytes for switch + 4Kbytes for bootcount
 316  */
 317 #define CONFIG_KM_RESERVED_PRAM 0x801000
 318 /* address for the bootcount (taken from end of RAM) */
 319 #define BOOTCOUNT_ADDR          (CONFIG_KM_RESERVED_PRAM)
 320 /* Use generic bootcount RAM driver */
 321 #define CONFIG_BOOTCOUNT_RAM
 322
 323 /* enable POST tests */
 324 #define CONFIG_POST     (CONFIG_SYS_POST_MEM_REGIONS)
 325 #define CONFIG_POST_SKIP_ENV_FLAGS
 326 #define CONFIG_POST_EXTERNAL_WORD_FUNCS
 327 #define CONFIG_CMD_DIAG
 328
 329 /* we do the whole PCIe FPGA config stuff here */
 330 #define CONFIG_BOARD_LATE_INIT
 331
 332 #endif /* _CONFIG_KM_ARM_H */