include/configs/km/km_arm.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * (C) Copyright 2009
   4  * Marvell Semiconductor <www.marvell.com>
   5  * Prafulla Wadaskar <prafulla@marvell.com>
   6  *
   7  * (C) Copyright 2009
   8  * Stefan Roese, DENX Software Engineering, sr@denx.de.
   9  *
  10  * (C) Copyright 2010-2011
  11  * Heiko Schocher, DENX Software Engineering, hs@denx.de.
  12  */
  13
  14 /*
  15  * for linking errors see
  16  * http://lists.denx.de/pipermail/u-boot/2009-July/057350.html
  17  */
  18
  19 #ifndef _CONFIG_KM_ARM_H
  20 #define _CONFIG_KM_ARM_H
  21
  22 /*
  23  * High Level Configuration Options (easy to change)
  24  */
  25 #define CONFIG_MARVELL
  26 #define CONFIG_FEROCEON_88FR131         /* CPU Core subversion */
  27 #define CONFIG_KW88F6281                /* SOC Name */
  28
  29 #define CONFIG_MACH_TYPE        MACH_TYPE_KM_KIRKWOOD
  30
  31 #define CONFIG_NAND_ECC_BCH
  32
  33 /* include common defines/options for all Keymile boards */
  34 #include "keymile-common.h"
  35
  36 /* SPI NOR Flash default params, used by sf commands */
  37 #define CONFIG_SF_DEFAULT_SPEED         8100000
  38 #define CONFIG_SF_DEFAULT_MODE          SPI_MODE_3
  39
  40 #if defined CONFIG_KM_ENV_IS_IN_SPI_NOR
  41 #define CONFIG_ENV_SPI_BUS              0
  42 #define CONFIG_ENV_SPI_CS               0
  43 #define CONFIG_ENV_SPI_MAX_HZ           8100000
  44 #define CONFIG_ENV_SPI_MODE             SPI_MODE_3
  45 #endif
  46
  47 /* Reserve 4 MB for malloc */
  48 #define CONFIG_SYS_MALLOC_LEN           (4 * 1024 * 1024)
  49
  50 #include "asm/arch/config.h"
  51
  52 #define CONFIG_SYS_MEMTEST_START 0x00400000     /* 4M */
  53 #define CONFIG_SYS_MEMTEST_END  0x007fffff      /*(_8M -1) */
  54 #define CONFIG_SYS_LOAD_ADDR    0x00800000      /* default load adr- 8M */
  55
  56 /* pseudo-non volatile RAM [hex] */
  57 #define CONFIG_KM_PNVRAM        0x80000
  58 /* physical RAM MTD size [hex] */
  59 #define CONFIG_KM_PHRAM         0x17F000
  60
  61 #define CONFIG_KM_CRAMFS_ADDR   0x2400000
  62 #define CONFIG_KM_KERNEL_ADDR   0x2000000       /* 3098KBytes */
  63 #define CONFIG_KM_FDT_ADDR      0x23E0000       /*  128KBytes */
  64
  65 /* architecture specific default bootargs */
  66 #define CONFIG_KM_DEF_BOOT_ARGS_CPU                                     \
  67                 "bootcountaddr=${bootcountaddr} ${mtdparts}"            \
  68                 " boardid=0x${IVM_BoardId} hwkey=0x${IVM_HWKey}"
  69
  70 #define CONFIG_KM_DEF_ENV_CPU                                           \
  71         "u-boot="CONFIG_HOSTNAME "/u-boot.kwb\0"                \
  72         CONFIG_KM_UPDATE_UBOOT                                          \
  73         "set_fdthigh=setenv fdt_high ${kernelmem}\0"                    \
  74         "checkfdt="                                                     \
  75                 "if cramfsls fdt_0x${IVM_BoardId}_0x${IVM_HWKey}.dtb; " \
  76                 "then true; else setenv cramfsloadfdt true; "           \
  77                 "setenv boot bootm ${load_addr_r}; "                    \
  78                 "echo No FDT found, booting with the kernel "           \
  79                 "appended one; fi\0"                                    \
  80         ""
  81
  82 #define CONFIG_SKIP_LOWLEVEL_INIT       /* disable board lowlevel_init */
  83 #define CONFIG_MISC_INIT_R
  84
  85 /*
  86  * NS16550 Configuration
  87  */
  88 #define CONFIG_SYS_NS16550_SERIAL
  89 #define CONFIG_SYS_NS16550_REG_SIZE     (-4)
  90 #define CONFIG_SYS_NS16550_CLK          CONFIG_SYS_TCLK
  91 #define CONFIG_SYS_NS16550_COM1         KW_UART0_BASE
  92 #define CONFIG_SYS_NS16550_COM2         KW_UART1_BASE
  93
  94 /*
  95  * Serial Port configuration
  96  * The following definitions let you select what serial you want to use
  97  * for your console driver.
  98  */
  99
 100 /*
 101  * For booting Linux, the board info and command line data
 102  * have to be in the first 8 MB of memory, since this is
 103  * the maximum mapped by the Linux kernel during initialization.
 104  */
 105 #define CONFIG_BOOTMAPSZ        (8 << 20)       /* Initial Memmap for Linux */
 106 #define CONFIG_CMDLINE_TAG              /* enable passing of ATAGs  */
 107 #define CONFIG_INITRD_TAG               /* enable INITRD tag */
 108 #define CONFIG_SETUP_MEMORY_TAGS        /* enable memory tag */
 109
 110 /*
 111  * NAND Flash configuration
 112  */
 113 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 114
 115 #define BOOTFLASH_START         0x0
 116
 117 /* Kirkwood has two serial IF */
 118 #if (CONFIG_CONS_INDEX == 2)
 119 #define CONFIG_KM_CONSOLE_TTY   "ttyS1"
 120 #else
 121 #define CONFIG_KM_CONSOLE_TTY   "ttyS0"
 122 #endif
 123
 124 /*
 125  * Other required minimal configurations
 126  */
 127 #define CONFIG_ARCH_CPU_INIT            /* call arch_cpu_init() */
 128 #define CONFIG_SYS_RESET_ADDRESS 0xffff0000     /* Rst Vector Adr */
 129
 130 /*
 131  * Ethernet Driver configuration
 132  */
 133 #define CONFIG_NETCONSOLE       /* include NetConsole support   */
 134 #define CONFIG_MII              /* expose smi ove miiphy interface */
 135 #define CONFIG_SYS_FAULT_ECHO_LINK_DOWN /* detect link using phy */
 136 #define CONFIG_MVGBE_PORTS      {1, 0}  /* enable port 0 only */
 137 #define CONFIG_PHY_BASE_ADR     0
 138 #define CONFIG_ENV_OVERWRITE    /* ethaddr can be reprogrammed */
 139 #define CONFIG_KM_COMMON_ETH_INIT /* standard km ethernet_present for piggy */
 140
 141 /*
 142  * I2C related stuff
 143  */
 144 #undef CONFIG_I2C_MVTWSI
 145 #define CONFIG_SYS_I2C
 146 #define CONFIG_SYS_I2C_SOFT     /* I2C bit-banged       */
 147 #define CONFIG_SYS_I2C_INIT_BOARD
 148
 149 #define CONFIG_KIRKWOOD_GPIO            /* Enable GPIO Support */
 150 #define CONFIG_SYS_NUM_I2C_BUSES        6
 151 #define CONFIG_SYS_I2C_MAX_HOPS         1
 152 #define CONFIG_SYS_I2C_BUSES    {       {0, {I2C_NULL_HOP} }, \
 153                                         {0, {{I2C_MUX_PCA9547, 0x70, 1} } }, \
 154                                         {0, {{I2C_MUX_PCA9547, 0x70, 2} } }, \
 155                                         {0, {{I2C_MUX_PCA9547, 0x70, 3} } }, \
 156                                         {0, {{I2C_MUX_PCA9547, 0x70, 4} } }, \
 157                                         {0, {{I2C_MUX_PCA9547, 0x70, 5} } }, \
 158                                 }
 159
 160 #ifndef __ASSEMBLY__
 161 #include <asm/arch/gpio.h>
 162 extern void __set_direction(unsigned pin, int high);
 163 void set_sda(int state);
 164 void set_scl(int state);
 165 int get_sda(void);
 166 int get_scl(void);
 167 #define KM_KIRKWOOD_SDA_PIN     8
 168 #define KM_KIRKWOOD_SCL_PIN     9
 169 #define KM_KIRKWOOD_SOFT_I2C_GPIOS      0x0300
 170 #define KM_KIRKWOOD_ENV_WP      38
 171
 172 #define I2C_ACTIVE      __set_direction(KM_KIRKWOOD_SDA_PIN, 0)
 173 #define I2C_TRISTATE    __set_direction(KM_KIRKWOOD_SDA_PIN, 1)
 174 #define I2C_READ        (kw_gpio_get_value(KM_KIRKWOOD_SDA_PIN) ? 1 : 0)
 175 #define I2C_SDA(bit)    kw_gpio_set_value(KM_KIRKWOOD_SDA_PIN, bit)
 176 #define I2C_SCL(bit)    kw_gpio_set_value(KM_KIRKWOOD_SCL_PIN, bit)
 177 #endif
 178
 179 #define I2C_DELAY       udelay(1)
 180 #define I2C_SOFT_DECLARATIONS
 181
 182 #define CONFIG_SYS_I2C_SOFT_SLAVE       0x0
 183 #define CONFIG_SYS_I2C_SOFT_SPEED       100000
 184
 185 /* EEprom support 24C128, 24C256 valid for environment eeprom */
 186 #define CONFIG_SYS_EEPROM_PAGE_WRITE_ENABLE
 187 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS       6 /* 64 Byte write page */
 188 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS   10
 189
 190 #define CONFIG_SYS_I2C_EEPROM_ADDR      0x50
 191 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN  2
 192
 193 /*
 194  *  Environment variables configurations
 195  */
 196 #if defined CONFIG_KM_ENV_IS_IN_SPI_NOR
 197 #define CONFIG_ENV_OFFSET               0xc0000     /* no bracets! */
 198 #define CONFIG_ENV_SIZE                 0x02000     /* Size of Environment */
 199 #define CONFIG_ENV_SECT_SIZE            0x10000
 200 #define CONFIG_ENV_OFFSET_REDUND        (CONFIG_ENV_OFFSET + \
 201                                         CONFIG_ENV_SECT_SIZE)
 202 #define CONFIG_ENV_TOTAL_SIZE           0x20000     /* no bracets! */
 203 #else
 204 #define CONFIG_SYS_DEF_EEPROM_ADDR      0x50
 205 #define CONFIG_ENV_EEPROM_IS_ON_I2C
 206 #define CONFIG_SYS_EEPROM_WREN
 207 #define CONFIG_ENV_OFFSET               0x0 /* no bracets! */
 208 #define CONFIG_ENV_SIZE                 (0x2000 - CONFIG_ENV_OFFSET)
 209 #define CONFIG_I2C_ENV_EEPROM_BUS 5 /* I2C2 (Mux-Port 5) */
 210 #define CONFIG_ENV_OFFSET_REDUND        0x2000 /* no bracets! */
 211 #define CONFIG_ENV_SIZE_REDUND          (CONFIG_ENV_SIZE)
 212 #endif
 213
 214 #define CONFIG_SYS_REDUNDAND_ENVIRONMENT
 215
 216
 217 /* SPI bus claim MPP configuration */
 218 #define CONFIG_SYS_KW_SPI_MPP   0x0
 219
 220 #define FLASH_GPIO_PIN                  0x00010000
 221 #define KM_FLASH_GPIO_PIN       16
 222
 223 #define CONFIG_KM_UPDATE_UBOOT                                          \
 224         "update="                                                       \
 225                 "sf probe 0;sf erase 0 +${filesize};"                   \
 226                 "sf write ${load_addr_r} 0 ${filesize};\0"
 227
 228 #if defined CONFIG_KM_ENV_IS_IN_SPI_NOR
 229 #define CONFIG_KM_NEW_ENV                                               \
 230         "newenv=sf probe 0;"                                            \
 231                 "sf erase " __stringify(CONFIG_ENV_OFFSET) " "          \
 232                 __stringify(CONFIG_ENV_TOTAL_SIZE)"\0"
 233 #else
 234 #define CONFIG_KM_NEW_ENV                                               \
 235         "newenv=setenv addr 0x100000 && "                               \
 236                 "i2c dev " __stringify(CONFIG_I2C_ENV_EEPROM_BUS) "; "  \
 237                 "mw.b ${addr} 0 4 && "                                  \
 238                 "eeprom write " __stringify(CONFIG_SYS_DEF_EEPROM_ADDR) \
 239                 " ${addr} " __stringify(CONFIG_ENV_OFFSET) " 4 && "     \
 240                 "eeprom write " __stringify(CONFIG_SYS_DEF_EEPROM_ADDR) \
 241                 " ${addr} " __stringify(CONFIG_ENV_OFFSET_REDUND) " 4\0"
 242 #endif
 243
 244 #ifndef CONFIG_KM_BOARD_EXTRA_ENV
 245 #define CONFIG_KM_BOARD_EXTRA_ENV       ""
 246 #endif
 247
 248 /*
 249  * Default environment variables
 250  */
 251 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
 252         CONFIG_KM_BOARD_EXTRA_ENV                                       \
 253         CONFIG_KM_DEF_ENV                                               \
 254         CONFIG_KM_NEW_ENV                                               \
 255         "arch=arm\0"                                                    \
 256         ""
 257
 258 #if !defined(CONFIG_MTD_NOR_FLASH)
 259 #undef  CONFIG_FLASH_CFI_MTD
 260 #undef  CONFIG_JFFS2_CMDLINE
 261 #endif
 262
 263 /* additions for new relocation code, must be added to all boards */
 264 #define CONFIG_SYS_SDRAM_BASE           0x00000000
 265 /* Do early setups now in board_init_f() */
 266
 267 /*
 268  * resereved pram area at the end of memroy [hex]
 269  * 8Mbytes for switch + 4Kbytes for bootcount
 270  */
 271 #define CONFIG_KM_RESERVED_PRAM 0x801000
 272 /* address for the bootcount (taken from end of RAM) */
 273 #define BOOTCOUNT_ADDR          (CONFIG_KM_RESERVED_PRAM)
 274
 275 /* enable POST tests */
 276 #define CONFIG_POST     (CONFIG_SYS_POST_MEM_REGIONS)
 277 #define CONFIG_POST_SKIP_ENV_FLAGS
 278 #define CONFIG_POST_EXTERNAL_WORD_FUNCS
 279
 280 /* we do the whole PCIe FPGA config stuff here */
 281
 282 #endif /* _CONFIG_KM_ARM_H */